Not getting any WU

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: Not getting any WU

Post by Neil-B »

If you post your log (including top 200 lines or so with the system configuration) someone might be able to help you diagnose why you GPU isn't working - it may be servers are busy, but in may be something in your setup ... See viewtopic.php?f=24&t=26036 for help on posting logs ... You previous crop of the log showed "GPUs: 0" which may be an issue (but I may be wrong) as mine shows this type of thing:

Code: Select all

08:00:59:           GPUs: 1
08:00:59:          GPU 0: Bus:3 Slot:0 Func:0 NVIDIA:3 GK107 [Quadro K420]
08:00:59:  CUDA Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:3.0 Driver:10.2
08:00:59:OpenCL Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:1.2 Driver:442.74
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Top
bloblobl0
Posts: 4
Joined: Sun Apr 12, 2020 2:51 pm

Re: Not getting any WU

Post by bloblobl0 »

Well this is my log, hope somebody can tell me why I can't utilize my GPU

Code: Select all

*********************** Log Started 2020-04-13T10:50:32Z ***********************
10:50:32:WU00:FS02:0xa7:************************** Gromacs Folding@home Core ***************************
10:50:32:WU00:FS02:0xa7:       Type: 0xa7
10:50:32:WU00:FS02:0xa7:       Core: Gromacs
10:50:32:WU00:FS02:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 9396 -checkpoint 15 -np 1
10:50:32:WU00:FS02:0xa7:************************************ CBang *************************************
10:50:32:WU00:FS02:0xa7:       Date: Oct 26 2019
10:50:32:WU00:FS02:0xa7:       Time: 01:38:25
10:50:32:WU00:FS02:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f
10:50:32:WU00:FS02:0xa7:     Branch: master
10:50:32:WU00:FS02:0xa7:   Compiler: Visual C++ 2008
10:50:32:WU00:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
10:50:32:WU00:FS02:0xa7:   Platform: win32 10
10:50:33:WU00:FS02:0xa7:       Bits: 64
10:50:33:WU00:FS02:0xa7:       Mode: Release
10:50:33:WU00:FS02:0xa7:************************************ System ************************************
10:50:33:WU00:FS02:0xa7:        CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz
10:50:33:WU00:FS02:0xa7:     CPU ID: GenuineIntel Family 6 Model 61 Stepping 4
10:50:33:WU00:FS02:0xa7:       CPUs: 4
10:50:33:WU00:FS02:0xa7:     Memory: 7.91GiB
10:50:33:WU00:FS02:0xa7:Free Memory: 4.85GiB
10:50:33:WU00:FS02:0xa7:    Threads: WINDOWS_THREADS
10:50:33:WU00:FS02:0xa7: OS Version: 6.2
10:50:33:WU00:FS02:0xa7:Has Battery: true
10:50:33:WU00:FS02:0xa7: On Battery: false
10:50:33:WU00:FS02:0xa7: UTC Offset: -7
10:50:33:WU00:FS02:0xa7:        PID: 11192
10:50:33:WU00:FS02:0xa7:        CWD: C:\Users\Dick Thunderson\AppData\Roaming\FAHClient\work
10:50:33:WU00:FS02:0xa7:******************************** Build - libFAH ********************************
10:50:33:WU00:FS02:0xa7:    Version: 0.0.18
10:50:33:WU00:FS02:0xa7:     Author: Joseph Coffland <[email protected]>
10:50:33:WU00:FS02:0xa7:  Copyright: 2019 foldingathome.org
10:50:33:WU00:FS02:0xa7:   Homepage: https://foldingathome.org/
10:50:33:WU00:FS02:0xa7:       Date: Oct 26 2019
10:50:33:WU00:FS02:0xa7:       Time: 01:52:30
10:50:33:WU00:FS02:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e
10:50:33:WU00:FS02:0xa7:     Branch: master
10:50:33:WU00:FS02:0xa7:   Compiler: Visual C++ 2008
10:50:33:WU00:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
10:50:33:WU00:FS02:0xa7:   Platform: win32 10
10:50:33:WU00:FS02:0xa7:       Bits: 64
10:50:33:WU00:FS02:0xa7:       Mode: Release
10:50:33:WU00:FS02:0xa7:************************************ Build *************************************
10:50:33:WU00:FS02:0xa7:       SIMD: avx_256
10:50:33:WU00:FS02:0xa7:********************************************************************************
10:50:33:WU00:FS02:0xa7:Project: 16417 (Run 1258, Clone 4, Gen 14)
10:50:33:WU00:FS02:0xa7:Unit: 0x0000001096880e6e5e8a61a06950cbef
10:50:33:WU00:FS02:0xa7:Digital signatures verified
10:50:33:WU00:FS02:0xa7:Calling: mdrun -s frame14.tpr -o frame14.trr -x frame14.xtc -cpi state.cpt -cpt 15 -nt 1
10:50:33:WU00:FS02:0xa7:Steps: first=3500000 total=250000
10:50:34:WU00:FS02:0xa7:Completed 45422 out of 250000 steps (18%)
10:51:13:Removing old file 'configs/config-20200413-062451.xml'
10:51:13:Saving configuration to config.xml
10:51:13:<config>
10:51:13:  <!-- Folding Core -->
10:51:13:  <core-priority v='low'/>
10:51:13:
10:51:13:  <!-- Network -->
10:51:13:  <proxy v=':8080'/>
10:51:13:
10:51:13:  <!-- Slot Control -->
10:51:13:  <pause-on-battery v='false'/>
10:51:13:  <power v='FULL'/>
10:51:13:
10:51:13:  <!-- User Information -->
10:51:13:  <passkey v='********************************'/>
10:51:13:  <team v='223518'/>
10:51:13:  <user v='Anon'/>
10:51:13:
10:51:13:  <!-- Folding Slots -->
10:51:13:  <slot id='0' type='CPU'>
10:51:13:    <cpus v='2'/>
10:51:13:  </slot>
10:51:13:  <slot id='2' type='CPU'/>
10:51:13:  <slot id='1' type='GPU'/>
10:51:13:</config>
10:51:30:WU02:FS01:Connecting to 65.254.110.245:8080
10:51:31:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:51:31:WU02:FS01:Connecting to 18.218.241.186:80
10:51:31:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:51:31:ERROR:WU02:FS01:Exception: Could not get an assignment
10:53:08:WU02:FS01:Connecting to 65.254.110.245:8080
10:53:08:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:53:08:WU02:FS01:Connecting to 18.218.241.186:80
10:53:09:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:53:09:ERROR:WU02:FS01:Exception: Could not get an assignment
10:55:45:WU02:FS01:Connecting to 65.254.110.245:8080
10:55:45:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:55:45:WU02:FS01:Connecting to 18.218.241.186:80
10:55:46:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:55:46:ERROR:WU02:FS01:Exception: Could not get an assignment
10:57:14:WU00:FS02:0xa7:Completed 47500 out of 250000 steps (19%)
10:57:59:WU01:FS00:0xa7:Completed 55000 out of 250000 steps (22%)
10:59:59:WU02:FS01:Connecting to 65.254.110.245:8080
10:59:59:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:59:59:WU02:FS01:Connecting to 18.218.241.186:80
11:00:00:WU02:FS01:Assigned to work server 128.252.203.10
11:00:00:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK208 [GeForce 920M] from 128.252.203.10
11:00:00:WU02:FS01:Connecting to 128.252.203.10:8080
11:00:21:WARNING:WU02:FS01:WorkServer connection failed on port 8080 trying 80
11:00:21:WU02:FS01:Connecting to 128.252.203.10:80
11:00:42:ERROR:WU02:FS01:Exception: Failed to connect to 128.252.203.10:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
Top
BobWilliams757
Posts: 520
Joined: Fri Apr 03, 2020 2:22 pm
Hardware configuration: ASRock X370M PRO4
Ryzen 2400G APU
16 GB DDR4-3200
MSI GTX 1660 Super Gaming X

Re: Not getting any WU

Post by BobWilliams757 »

bloblobl0 wrote:Well this is my log, hope somebody can tell me why I can't utilize my GPU

Code: Select all

*********************** Log Started 2020-04-13T10:50:32Z ***********************
10:50:32:WU00:FS02:0xa7:************************** Gromacs Folding@home Core ***************************
10:50:32:WU00:FS02:0xa7:       Type: 0xa7
10:50:32:WU00:FS02:0xa7:       Core: Gromacs
10:50:32:WU00:FS02:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 9396 -checkpoint 15 -np 1
10:50:32:WU00:FS02:0xa7:************************************ CBang *************************************
10:50:32:WU00:FS02:0xa7:       Date: Oct 26 2019
10:50:32:WU00:FS02:0xa7:       Time: 01:38:25
10:50:32:WU00:FS02:0xa7:   Revision: c46a1a011a24143739ac7218c5a435f66777f62f
10:50:32:WU00:FS02:0xa7:     Branch: master
10:50:32:WU00:FS02:0xa7:   Compiler: Visual C++ 2008
10:50:32:WU00:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
10:50:32:WU00:FS02:0xa7:   Platform: win32 10
10:50:33:WU00:FS02:0xa7:       Bits: 64
10:50:33:WU00:FS02:0xa7:       Mode: Release
10:50:33:WU00:FS02:0xa7:************************************ System ************************************
10:50:33:WU00:FS02:0xa7:        CPU: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz
10:50:33:WU00:FS02:0xa7:     CPU ID: GenuineIntel Family 6 Model 61 Stepping 4
10:50:33:WU00:FS02:0xa7:       CPUs: 4
10:50:33:WU00:FS02:0xa7:     Memory: 7.91GiB
10:50:33:WU00:FS02:0xa7:Free Memory: 4.85GiB
10:50:33:WU00:FS02:0xa7:    Threads: WINDOWS_THREADS
10:50:33:WU00:FS02:0xa7: OS Version: 6.2
10:50:33:WU00:FS02:0xa7:Has Battery: true
10:50:33:WU00:FS02:0xa7: On Battery: false
10:50:33:WU00:FS02:0xa7: UTC Offset: -7
10:50:33:WU00:FS02:0xa7:        PID: 11192
10:50:33:WU00:FS02:0xa7:        CWD: C:\Users\Dick Thunderson\AppData\Roaming\FAHClient\work
10:50:33:WU00:FS02:0xa7:******************************** Build - libFAH ********************************
10:50:33:WU00:FS02:0xa7:    Version: 0.0.18
10:50:33:WU00:FS02:0xa7:     Author: Joseph Coffland <[email protected]>
10:50:33:WU00:FS02:0xa7:  Copyright: 2019 foldingathome.org
10:50:33:WU00:FS02:0xa7:   Homepage: https://foldingathome.org/
10:50:33:WU00:FS02:0xa7:       Date: Oct 26 2019
10:50:33:WU00:FS02:0xa7:       Time: 01:52:30
10:50:33:WU00:FS02:0xa7:   Revision: c1e3513b1bc0c16013668f2173ee969e5995b38e
10:50:33:WU00:FS02:0xa7:     Branch: master
10:50:33:WU00:FS02:0xa7:   Compiler: Visual C++ 2008
10:50:33:WU00:FS02:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
10:50:33:WU00:FS02:0xa7:   Platform: win32 10
10:50:33:WU00:FS02:0xa7:       Bits: 64
10:50:33:WU00:FS02:0xa7:       Mode: Release
10:50:33:WU00:FS02:0xa7:************************************ Build *************************************
10:50:33:WU00:FS02:0xa7:       SIMD: avx_256
10:50:33:WU00:FS02:0xa7:********************************************************************************
10:50:33:WU00:FS02:0xa7:Project: 16417 (Run 1258, Clone 4, Gen 14)
10:50:33:WU00:FS02:0xa7:Unit: 0x0000001096880e6e5e8a61a06950cbef
10:50:33:WU00:FS02:0xa7:Digital signatures verified
10:50:33:WU00:FS02:0xa7:Calling: mdrun -s frame14.tpr -o frame14.trr -x frame14.xtc -cpi state.cpt -cpt 15 -nt 1
10:50:33:WU00:FS02:0xa7:Steps: first=3500000 total=250000
10:50:34:WU00:FS02:0xa7:Completed 45422 out of 250000 steps (18%)
10:51:13:Removing old file 'configs/config-20200413-062451.xml'
10:51:13:Saving configuration to config.xml
10:51:13:<config>
10:51:13:  <!-- Folding Core -->
10:51:13:  <core-priority v='low'/>
10:51:13:
10:51:13:  <!-- Network -->
10:51:13:  <proxy v=':8080'/>
10:51:13:
10:51:13:  <!-- Slot Control -->
10:51:13:  <pause-on-battery v='false'/>
10:51:13:  <power v='FULL'/>
10:51:13:
10:51:13:  <!-- User Information -->
10:51:13:  <passkey v='********************************'/>
10:51:13:  <team v='223518'/>
10:51:13:  <user v='Anon'/>
10:51:13:
10:51:13:  <!-- Folding Slots -->
10:51:13:  <slot id='0' type='CPU'>
10:51:13:    <cpus v='2'/>
10:51:13:  </slot>
10:51:13:  <slot id='2' type='CPU'/>
10:51:13:  <slot id='1' type='GPU'/>
10:51:13:</config>
10:51:30:WU02:FS01:Connecting to 65.254.110.245:8080
10:51:31:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:51:31:WU02:FS01:Connecting to 18.218.241.186:80
10:51:31:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:51:31:ERROR:WU02:FS01:Exception: Could not get an assignment
10:53:08:WU02:FS01:Connecting to 65.254.110.245:8080
10:53:08:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:53:08:WU02:FS01:Connecting to 18.218.241.186:80
10:53:09:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:53:09:ERROR:WU02:FS01:Exception: Could not get an assignment
10:55:45:WU02:FS01:Connecting to 65.254.110.245:8080
10:55:45:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:55:45:WU02:FS01:Connecting to 18.218.241.186:80
10:55:46:WARNING:WU02:FS01:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
10:55:46:ERROR:WU02:FS01:Exception: Could not get an assignment
10:57:14:WU00:FS02:0xa7:Completed 47500 out of 250000 steps (19%)
10:57:59:WU01:FS00:0xa7:Completed 55000 out of 250000 steps (22%)
10:59:59:WU02:FS01:Connecting to 65.254.110.245:8080
10:59:59:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:59:59:WU02:FS01:Connecting to 18.218.241.186:80
11:00:00:WU02:FS01:Assigned to work server 128.252.203.10
11:00:00:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK208 [GeForce 920M] from 128.252.203.10
11:00:00:WU02:FS01:Connecting to 128.252.203.10:8080
11:00:21:WARNING:WU02:FS01:WorkServer connection failed on port 8080 trying 80
11:00:21:WU02:FS01:Connecting to 128.252.203.10:80
11:00:42:ERROR:WU02:FS01:Exception: Failed to connect to 128.252.203.10:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

I'm a newbie at this, but it appears you now have a recognized GPU which is simply not getting an assignment. With the huge influx of new folders, this is not uncommon. Often people don't pick up a WU for days, though I've had waits no longer than 10-12 hours that I've noticed.

I'd just leave it running as is for now and hope that it picks up a WU. If I'm incorrect about any of the above, someone with more experience will hopefully come along and correct me.
Fold them if you get them!
Top
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: Not getting any WU

Post by Neil-B »

To troubleshoot really need the head of the log with the system details, should look like ... but I guess that is effective what you have cropped into previous post ... the bit I think is missing are the 2nd and 3rd lines (obviously relevant to your GPU):

Code: Select all

08:00:59:        OS Arch: AMD64
08:00:59:           GPUs: 1
08:00:59:          GPU 0: Bus:3 Slot:0 Func:0 NVIDIA:3 GK107 [Quadro K420]
08:00:59:  CUDA Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:3.0 Driver:10.2
08:00:59:OpenCL Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:1.2 Driver:442.74
08:00:59:  Win32 Service: false
Last edited by Neil-B on Mon Apr 13, 2020 4:14 pm, edited 3 times in total.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Top
HaloJones
Posts: 906
Joined: Thu Jul 24, 2008 10:16 am

Re: Not getting any WU

Post by HaloJones »

the log shows there is no recognised GPU. What is the card and what drivers are installed?
single 1070

Image
Top
BobWilliams757
Posts: 520
Joined: Fri Apr 03, 2020 2:22 pm
Hardware configuration: ASRock X370M PRO4
Ryzen 2400G APU
16 GB DDR4-3200
MSI GTX 1660 Super Gaming X

Re: Not getting any WU

Post by BobWilliams757 »

It looked to me like a configuration change was saved after the initial header.


The end of the log showed:


10:59:59:WU02:FS01:Connecting to 65.254.110.245:8080
10:59:59:WARNING:WU02:FS01:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
10:59:59:WU02:FS01:Connecting to 18.218.241.186:80
11:00:00:WU02:FS01:Assigned to work server 128.252.203.10
11:00:00:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK208 [GeForce 920M] from 128.252.203.10
11:00:00:WU02:FS01:Connecting to 128.252.203.10:8080
11:00:21:WARNING:WU02:FS01:WorkServer connection failed on port 8080 trying 80
11:00:21:WU02:FS01:Connecting to 128.252.203.10:80
11:00:42:ERROR:WU02:FS01:Exception: Failed to connect to 128.252.203.10:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

(bolded by me)

As I said, I'm "new" to this again, so subject to correction. I thought it showed that a configuration change worked and there was now an available GPU.
Fold them if you get them!
Top
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: Not getting any WU

Post by Neil-B »

Good catch … I scanned the latest but missed that … so it looks like all might be ok now and just possibly server load … maybe I was just jumping at shadows - have seen a lot of misconfigured GPUs recently
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Top
meltz511
Posts: 15
Joined: Sun Jan 27, 2013 11:43 pm

Re: Not getting any WU

Post by meltz511 »

On increasing the number of steps of WUs:

With the info from the admin, the amount of network traffic out from the servers would be less (WUs the same physical size, but take longer to compute, thus WUs sent out of server less often, thus less network traffic going out of servers). Also less connections to servers at one time.

fewer connections that transmit larger results back to the server; fewer connections at one time is easier on server harddrives, the harddrive needles jump around less so throughput to storage is quicker. More connections are less efficient and slows server down (more time spent on needle jumping then writing). (unless the servers are all SSDs)

While many connections that transmit small amounts of data, reminds me of denial of service attacks. The server is overloaded, and can't do anything.

my two cents anyway.. *shrug*
Top
Joe_H
Site Admin
Posts: 7937
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Not getting any WU

Post by Joe_H »

Define "small". The returning WUs can be 10s of MB, to over 100 MB each. Double the number of steps, the file size grows as more intermediate data needs to be included. Right now that data gets buffered in the server RAM before getting transferred to drives.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Top
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Contact PantherX

Re: Not getting any WU

Post by PantherX »

BobWilliams757 wrote:...11:00:00:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GK208 [GeForce 920M] from 128.252.203.10...
That GPU is supported as it has OpenCL 1.2 and Double Precision support: https://www.techpowerup.com/gpu-specs/g ... 920m.c2646

However, it is a mobile GPU so please ensure that it can fold the assigned WU before the Timeout date. This may mean that you might have to leave your system folding on the GPU 24/7 to meet the deadline. Feel free to experiment and report back :)
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Top
bloblobl0
Posts: 4
Joined: Sun Apr 12, 2020 2:51 pm

Re: Not getting any WU

Post by bloblobl0 »

PantherX wrote: However, it is a mobile GPU so please ensure that it can fold the assigned WU before the Timeout date.
How do I ensure that?

I have left my laptop folding on CPU for the last 48 hours. So far, no available WUs for my GPU.
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Not getting any WU

Post by bruce »

I would reboot my FAH computer about this time of (night, depending on your timezone). A certain percentage of computers in the USA are switched off for the night so I've been able to get WUs around this time when I couldn't for the previous 14 hours.

Also, rebooting occasionally does improve your chances. One of the enhancements that we can expect in a soon-to-be-released new client will contain an improvement for this condition.
Top
kaz011890
Posts: 13
Joined: Mon Feb 27, 2017 6:45 am

Re: Not getting any WU

Post by kaz011890 »

Sorry i have another question.

Is there a way or a code to download a new (maybe more than 1) WU before completing the WU that the GPU is currently working on?
I know the servers are overloaded right now and it doesn't have much storage or bandwidth to upload and download all the data from the computers from around the world.

So is there a way that i can download multiple WU units at a time and complete them and keep that completed data stored on my computer for the time being until the server is ready to download all the data?
Maybe im 100% wrong but this could maybe take some of the strain that the servers are experiencing right now
Top
tulanebarandgrill
Posts: 36
Joined: Thu Nov 16, 2017 2:57 pm

Re: Not getting any WU

Post by tulanebarandgrill »

So I have a 2080 Ti but I notice my system is busy anywhere from 0 to 30% of the time. Also it seems sometimes I will not get any WU unless I reboot. This is new behavior since the WU shortage. Is there anything specific I can check ? I've considered reinstalling the client. Previous daily averages were trending to 4,000,000 +

Image
- TulaneBaG
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Not getting any WU

Post by bruce »

There's a setting in the client that allows you to TRY to download the next Wu before the current WU finishes. The only help it can offer is to start trying sooner. If the servers are saturated, you get to find out about that just a little sooner.

No.

FAHClient is designed to prevent you from caching WUs. If you could, it would destroy your bonus because you'd be holding WUs longer than necessary and ultimately would delay the completion of active trajectories.
Top
Post Reply

Return to “New Donors start here”