Best config CPU w/ 40 threads?

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
zombie67
Posts: 6
Joined: Mon Jul 15, 2013 12:29 am
Location: Reno, Nevada

Best config CPU w/ 40 threads?

Post by zombie67 »

How to best to configure a machine with 40 threads? 32 is the max right? So what is the best way to do this? 20/20, 32/8, 16/16/8? Something else?
Team SETI.USA
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Best config CPU w/ 40 threads?

Post by JimboPalmer »

If you get work with 32/8, it will make the most points.
16/16/8 would always get work.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
foldinghomealone2
Posts: 146
Joined: Sun Jul 30, 2017 8:40 pm

Re: Best config CPU w/ 40 threads?

Post by foldinghomealone2 »

@JimboPalmer:
I remember a post from Joe_H stating that new projects use 12 threads as maximum:
"At the moment there are a number of CPU projects getting released with a maximum of 12 threads. There are other projects out that can use more, not sure of the current max."
viewtopic.php?f=61&t=33649#p320355

I don't know what the ratio is between projects that are able 16 or 12 threads.
Maybe setting 16/12/12 could be an option.
But someone more experienced should make a recommendation here.
Last edited by foldinghomealone2 on Thu Apr 09, 2020 10:30 am, edited 1 time in total.
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: Best config CPU w/ 40 threads?

Post by Neil-B »

My 24core and 32core slots are running 24/7 … there seem to be enough WUs for larger core machines … it may be best not splitting larger core slots down to multiple 12s unless really needed and leaving the 12core and less WUs for machines that can't do anything larger
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
foldinghomealone2
Posts: 146
Joined: Sun Jul 30, 2017 8:40 pm

Re: Best config CPU w/ 40 threads?

Post by foldinghomealone2 »

@Neil-B:
Are the cores fully utilized then?
Just in case a let's say 16-thread projects runs on your 32-thread slot and therefore utilizes it only by 50%.
Neil-B
Posts: 1996
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon [email protected], 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon [email protected], 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: [email protected], 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: Best config CPU w/ 40 threads?

Post by Neil-B »

I have only once had this happen … the AS stepped my 32core slot down to 12 - wondered why it was taking its time until I spotted that … This is once in some 600+ WUs over the last month … but I may just have been lucky … I do run them with the client-type "advanced" flag set as I am happy that my kit is both stable and that the "risk" of running post-beta but pre-full release WUs is acceptable.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
Joe_H
Site Admin
Posts: 7939
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Best config CPU w/ 40 threads?

Post by Joe_H »

foldinghomealone2 wrote:I remember a post from Joe_H stating that new projects use 12 threads as maximum:
Just to clarify, that was at a point when there was a bit of a shortage of WUs that would run on a large number of threads. That situation has improved, some of the larger CPU projects have ramped up.

As for 32 being the max number of threads , that is on Windows machines. Linux and OS X can configure for more than 32.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Post Reply