Error Message Re: OpenCL.dll
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 2
- Joined: Mon Nov 09, 2015 3:36 am
Error Message Re: OpenCL.dll
Hello! I just downloaded and successfully installed the latest client (7.4.4). However, when it runs, I continuously get a pop up that says: "FahCore_21.exe - System Error...The program can't start because OpenCL.dll is missing from your computer. Try reinstalling the program to fix this problem."
I tried running AMD Clean Unistall Utility (after reading a similar post and solution on this forum) and restarted my computer, but no dice.
I am using a NVIDIA GTX 650ti if that matters. I established my FAH account 4 years ago, however it's been years since I've done anything with it. I hope you guys can help me get up and running.
Thanks in advance for any assistance!
-James
I tried running AMD Clean Unistall Utility (after reading a similar post and solution on this forum) and restarted my computer, but no dice.
I am using a NVIDIA GTX 650ti if that matters. I established my FAH account 4 years ago, however it's been years since I've done anything with it. I hope you guys can help me get up and running.
Thanks in advance for any assistance!
-James
Re: Error Message Re: OpenCL.dll
Welcome James.
You haven't said how you installed your GPU driver or what operating system you're using but if you go to http://www.nvidia.com/Download/index.aspx?lang=en-us and fill in the required information you will be able to download a driver that contains the needed opencl.dll. How you install those drivers depends on your operating system. Since you're using AMD's DDU I'll assume Windows in which case you simply double-click the installer. If you don't need or want some of the extras that come with the driver select the Custom install and remove the check next to anything you don't want. The driver is the only part that is actually required and usually it's check can't be removed. There's also a box next to "Perform a clean install" that I always check too.
You haven't said how you installed your GPU driver or what operating system you're using but if you go to http://www.nvidia.com/Download/index.aspx?lang=en-us and fill in the required information you will be able to download a driver that contains the needed opencl.dll. How you install those drivers depends on your operating system. Since you're using AMD's DDU I'll assume Windows in which case you simply double-click the installer. If you don't need or want some of the extras that come with the driver select the Custom install and remove the check next to anything you don't want. The driver is the only part that is actually required and usually it's check can't be removed. There's also a box next to "Perform a clean install" that I always check too.
Last edited by bollix47 on Mon Nov 09, 2015 2:12 pm, edited 1 time in total.
-
- Site Moderator
- Posts: 6359
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: Error Message Re: OpenCL.dll
What version of Windows do you use ?
Re: Error Message Re: OpenCL.dll
Are you trying to use AMD's drivers on a NVidia GPUJames_Lang wrote:I tried running AMD Clean Uninstall Utility ... I am using a NVIDIA GTX 650ti if that matters.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 7
- Joined: Mon Mar 18, 2013 3:19 pm
Re: Error Message Re: OpenCL.dll
I had the same problem after doing the november update for windows 10, seems it somehow removed, moved or did whatever to that file. reinstalling the Nvidia drivers fixed it for me.
Re: Error Message Re: OpenCL.dll
My current theory (yet to be proven) is that when Microsoft installs new drivers, it removes OpenCL (and CUDA) without telling you it did it and doesn't restore it. Installing the drivers from AMD or NV (depending on your GPU) will give you the option to install those extras (default=yes) ... ones that I consider essential parts of their drivers.
I haven't yet recorded a complaint against Windows Update but it's on my list. You may choose to do the same.
I haven't yet recorded a complaint against Windows Update but it's on my list. You may choose to do the same.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: Error Message Re: OpenCL.dll
I've seen others have the OpenCL.dll error after letting Windows update drivers. I never let MS do that.
-
- Posts: 660
- Joined: Mon Oct 25, 2010 5:57 am
- Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 [email protected] GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers
b) 2004 HP a475c desktop, 1 core Pent 4 [email protected] GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only
c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß - Location: Saratoga, California USA
Re: Error Message Re: OpenCL.dll
Just got the same error when my system rebooted after install of the Microsoft Windows 10 Anniversary update today.
I'll reinstall the Nvidia drivers to get me back online.
[UPDATE EDIT] Just installed 368.81 drivers and rebooted. FAH Core 21 came right up and started folding. So, obviously, Microsoft did something to delete the installed Opencll.dll software while updating.
No info yet on efficiency of either the Windows 10 update or 368.81, but I am watching out.
I'll reinstall the Nvidia drivers to get me back online.
[UPDATE EDIT] Just installed 368.81 drivers and rebooted. FAH Core 21 came right up and started folding. So, obviously, Microsoft did something to delete the installed Opencll.dll software while updating.
No info yet on efficiency of either the Windows 10 update or 368.81, but I am watching out.
-
- Posts: 2040
- Joined: Sat Dec 01, 2012 3:43 pm
- Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441
Re: Error Message Re: OpenCL.dll
Maybe this can help for future updates
viewtopic.php?f=101&t=28989
viewtopic.php?f=101&t=28989
-
- Posts: 3
- Joined: Mon Oct 24, 2016 4:38 pm
Re: Error Message Re: OpenCL.dll
I am having the same problem, i followed the instructions to reinstalling/updating my graphics drivers. It all works, I stop getting the error, but after about 30-40 seconds of running, my entire system shuts down. I don't know if it is relevant, but this exact same thing happened when I went to play the demo for Doom, it would get through the credits, start to show the launch screen, then BAM shutdown.
GPU: Zotac GTX 970
CPU: Intel 6600k OC at 4.0GHz
Windows 10 Home
boot ssd and mass storage hdd.
GPU: Zotac GTX 970
CPU: Intel 6600k OC at 4.0GHz
Windows 10 Home
boot ssd and mass storage hdd.
-
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Error Message Re: OpenCL.dll
Hello white_nrdy, welcome to the Folding Support forum.
The newest 37x.xx driver from NV doesn't seem to work well with folding. Reinstall a 36x.xx driver and see if that works better for you.
The newest 37x.xx driver from NV doesn't seem to work well with folding. Reinstall a 36x.xx driver and see if that works better for you.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
- Posts: 3
- Joined: Mon Oct 24, 2016 4:38 pm
Re: Error Message Re: OpenCL.dll
OK, thank you. I will try that. I know that this isn't the forum to post about this, but could driver version problem be the same reason that doom crashed my system (I tried 4 times)
Re: Error Message Re: OpenCL.dll
Yes, problems with bad drivers can easily crash your system.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 3
- Joined: Mon Oct 24, 2016 4:38 pm
Re: Error Message Re: OpenCL.dll
Ok, it worked. Thanks, and doom works