Your math is MUCH appreciated. I am running RAID5, but they're mostly idle. I'll give it a shot for at least one 750 Ti, worst case a new PSU is under $50 these days for 500W. I am running the EA-380D, not sure what the D indicates, but probably very close to the same ballpark.
I was also thinking the same about CPU, since sounds like you said, wattage much better spent on the 750.
I have to confess, built many PC's and never looking into OC'ing GPU's. Time for some research.
GPUs stuck on READY
Moderators: Site Moderators, FAHC Science Team
-
Napoleon
- Posts: 887
- Joined: Wed May 26, 2010 2:31 pm
- Hardware configuration: Atom330 (overclocked):
Windows 7 Ultimate 64bit
Intel Atom330 dualcore (4 HyperThreads)
NVidia GT430, core_15 work
2x2GB Kingston KVR1333D3N9K2/4G 1333MHz memory kit
Asus AT3IONT-I Deluxe motherboard - Location: Finland
Re: GPUs stuck on READY
OK, found the rail config for EA-380D, and looks like you have to be a bit more careful than I thought. 12V2 is CPU only, and is 12Vx15A == 180W. So you can stick with the CPU overclock if you like. Bad news is 12V1 - 12Vx17A == 204W. Not enough headroom for a 960 + 750Ti (120W + 60W == 180W), given that the 12V1 rail has to feed everything but the CPU.
However, 2x750Ti == 2x60W == 120W leaves you 204W - 120W == 84W. So I suggest you get a 750Ti with 6pin external PCIE power first and see if you like it. If you do, get another without the external power requirement and put it into the slower PCIE slot. Don't bother overclocking the 2nd one, though. According to spec, the mobo connector can supply max 12Vx5.5A == 66W from 12V rail. At least I'd be out of my comfort zone with such a small headroom.
IIRC, even a single 750Ti + CPU should be enough to reach the 750k PPM (about 22k x 30 days == 660k PPD + CPU) goal if you fold 24/7, assuming you get extremely unlucky and only get core_15 WUs for an entire month. But I presume you'd get over 1 million PPM on a regular basis...
So, the 2nd 750Ti might be bit of an overkill considering the 750k PPM goal after all. Be that as it may, 2x750Ti should be a very straightforward replacement for the 9400GT + 9500GT combo - going from 2x50W to 2x60W is a small leap. An extra 20W is highly unlikely to give you any power or temperature problems.
The great thing about having two GPUs is that you can pause just the one connected to your display and use the computer for daily grind without lag, while the other GPU keeps crunching at full blast. So, connect your display to the card in the slower PCIE slot (be it either 9500GT or 750Ti, assuming the 9500GT doesn't require external power).
Caveat emptor; If you mix 750Ti and 9500GT, do *not* get the latest drivers. Apparently 341.44 is the last one to support pre-Fermi GPUs. Fortunately, it supports 750Ti. However, it doesn't support the latest and greatest 900 series GPUs. Up to you if you want to go for 2x 750Ti and latest drivers straight away.
However, 2x750Ti == 2x60W == 120W leaves you 204W - 120W == 84W. So I suggest you get a 750Ti with 6pin external PCIE power first and see if you like it. If you do, get another without the external power requirement and put it into the slower PCIE slot. Don't bother overclocking the 2nd one, though. According to spec, the mobo connector can supply max 12Vx5.5A == 66W from 12V rail. At least I'd be out of my comfort zone with such a small headroom.
IIRC, even a single 750Ti + CPU should be enough to reach the 750k PPM (about 22k x 30 days == 660k PPD + CPU) goal if you fold 24/7, assuming you get extremely unlucky and only get core_15 WUs for an entire month. But I presume you'd get over 1 million PPM on a regular basis...
So, the 2nd 750Ti might be bit of an overkill considering the 750k PPM goal after all. Be that as it may, 2x750Ti should be a very straightforward replacement for the 9400GT + 9500GT combo - going from 2x50W to 2x60W is a small leap. An extra 20W is highly unlikely to give you any power or temperature problems.
The great thing about having two GPUs is that you can pause just the one connected to your display and use the computer for daily grind without lag, while the other GPU keeps crunching at full blast. So, connect your display to the card in the slower PCIE slot (be it either 9500GT or 750Ti, assuming the 9500GT doesn't require external power).
Caveat emptor; If you mix 750Ti and 9500GT, do *not* get the latest drivers. Apparently 341.44 is the last one to support pre-Fermi GPUs. Fortunately, it supports 750Ti. However, it doesn't support the latest and greatest 900 series GPUs. Up to you if you want to go for 2x 750Ti and latest drivers straight away.
Re: GPUs stuck on READY
That is GREAT info, I definitely would've messed that up, I think we're on the same page too. The dollar limitation will only allow me to do a single 750Ti anyway, so I think I'm going to be solid.Caveat emptor; If you mix 750Ti and 9500GT, do *not* get the latest drivers. Apparently 341.44 is the last one to support pre-Fermi GPUs. Fortunately, it supports 750Ti. However, it doesn't support the latest and greatest 900 series GPUs. Up to you if you want to go for 2x 750Ti and latest drivers straight away.
If that gets me close to 750K that should be fine, because I'm also using a laptop i5 and laptop core duo, so between them I'm getting a minimum of 2k PPD.
Re: GPUs stuck on READY
I have a system with a 750 Ti and I don't notice any lag. That's no guarantee, of course, since it only gets used for browser-type graphics and if you're doing more demanding rendering, it may be more noticeable.Napoleon wrote:The great thing about having two GPUs is that you can pause just the one connected to your display and use the computer for daily grind without lag, while the other GPU keeps crunching at full blast.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
Napoleon
- Posts: 887
- Joined: Wed May 26, 2010 2:31 pm
- Hardware configuration: Atom330 (overclocked):
Windows 7 Ultimate 64bit
Intel Atom330 dualcore (4 HyperThreads)
NVidia GT430, core_15 work
2x2GB Kingston KVR1333D3N9K2/4G 1333MHz memory kit
Asus AT3IONT-I Deluxe motherboard - Location: Finland
Re: GPUs stuck on READY
... I've specifically disabled GPU acceleration in the browser settings. Rightbruce wrote:I have a system with a 750 Ti and I don't notice any lag. That's no guarantee, of course, since it only gets used for browser-type graphics andNapoleon wrote:The great thing about having two GPUs is that you can pause just the one connected to your display and use the computer for daily grind without lag, while the other GPU keeps crunching at full blast.
Re: GPUs stuck on READY
The 750 Ti FTW is en route. 
-
Napoleon
- Posts: 887
- Joined: Wed May 26, 2010 2:31 pm
- Hardware configuration: Atom330 (overclocked):
Windows 7 Ultimate 64bit
Intel Atom330 dualcore (4 HyperThreads)
NVidia GT430, core_15 work
2x2GB Kingston KVR1333D3N9K2/4G 1333MHz memory kit
Asus AT3IONT-I Deluxe motherboard - Location: Finland
Re: GPUs stuck on READY
I suppose that's vague enough for a HW-agnostic forum like FF. Dare I ask... does it require external (6pin) PCIE power or not?
Re: GPUs stuck on READY
Yes sir, got the externally powered EVGA as recommended, can't wait, opt'd for overnight shipping.
Re: GPUs stuck on READY
I have not. It would be a good idea but I use a number of different browsers and other programs that use GPU acceleration and each one has a unique way to disable it. It was more of a bother than I was willing to submit to. The only time I noticed it was on my video player and CPU rendering is MUCH better than GPU rendering on my system.Napoleon wrote:... I've specifically disabled GPU acceleration in the browser settings. Rightbruce wrote:I have a system with a 750 Ti and I don't notice any lag. That's no guarantee, of course, since it only gets used for browser-type graphics andNapoleon wrote:The great thing about having two GPUs is that you can pause just the one connected to your display and use the computer for daily grind without lag, while the other GPU keeps crunching at full blast.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: GPUs stuck on READY
Ok, got it in and "running", but not folding.... tried client type advanced and couple other things, nothing. I know I sound like a fool by now, sorry.
Also reinstalled aforementioned recommended driver.
Screenshot
https://www.dropbox.com/s/itx9auwl0ccxjkj/1511.jpg?dl=0
Also reinstalled aforementioned recommended driver.
Screenshot
https://www.dropbox.com/s/itx9auwl0ccxjkj/1511.jpg?dl=0
Code: Select all
*********************** Log Started 2015-04-23T17:43:51Z ***********************
17:44:59:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
17:45:00:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
17:45:00:ERROR:WU01:FS01:Exception: Could not get an assignment
17:45:02:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
17:45:03:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
17:45:03:ERROR:WU01:FS01:Exception: Could not get an assignment
17:46:01:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
17:46:01:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
17:46:01:ERROR:WU01:FS01:Exception: Could not get an assignment
17:46:18:WARNING:WU02:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
17:47:31:WARNING:WU02:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
17:47:38:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
17:47:39:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
17:47:39:ERROR:WU01:FS01:Exception: Could not get an assignment
17:48:45:WARNING:WU02:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)Re: GPUs stuck on READY
You're not including the first page of your log (see the link in my previous post), so we have to guess whether you're talking about the 9x00GT GPUs or the GTX 750. There's a lot of difference in what we need to recommend.
I do see messages: GPU_MEMTEST_ERROR (124 = 0x7c) That is not a good sign. It could be defective hardware but might be drivers, it also might be temperature or 12v limitations or even driver mismatch, in which case you don't want to be using that configuration.
I do see messages: GPU_MEMTEST_ERROR (124 = 0x7c) That is not a good sign. It could be defective hardware but might be drivers, it also might be temperature or 12v limitations or even driver mismatch, in which case you don't want to be using that configuration.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: GPUs stuck on READY
Alright, here we go, moved to slot 0, so don't be thrown off.
Code: Select all
*********************** Log Started 2015-04-23T18:54:50Z ***********************
18:54:50:************************* Folding@home Client *************************
18:54:50: Website: http://folding.stanford.edu/
18:54:50: Copyright: (c) 2009-2014 Stanford University
18:54:50: Author: Joseph Coffland <[email protected]>
18:54:50: Args: --open-web-control
18:54:50: Config: E:/_Installed Programs/Folding DATA/config.xml
18:54:50:******************************** Build ********************************
18:54:50: Version: 7.4.4
18:54:50: Date: Mar 4 2014
18:54:50: Time: 20:26:54
18:54:50: SVN Rev: 4130
18:54:50: Branch: fah/trunk/client
18:54:50: Compiler: Intel(R) C++ MSVC 1500 mode 1200
18:54:50: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
18:54:50: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
18:54:50: Platform: win32 XP
18:54:50: Bits: 32
18:54:50: Mode: Release
18:54:50:******************************* System ********************************
18:54:50: CPU: AMD Athlon(tm) II X4 640 Processor
18:54:50: CPU ID: AuthenticAMD Family 16 Model 5 Stepping 3
18:54:50: CPUs: 4
18:54:50: Memory: 14.40GiB
18:54:50: Free Memory: 9.58GiB
18:54:50: Threads: WINDOWS_THREADS
18:54:50: OS Version: 6.1
18:54:50: Has Battery: false
18:54:50: On Battery: false
18:54:50: UTC Offset: -4
18:54:50: PID: 8268
18:54:50: CWD: E:/_Installed Programs/Folding DATA
18:54:50: OS: Windows 7 Professional
18:54:50: OS Arch: AMD64
18:54:50: GPUs: 2
18:54:50: GPU 0: NVIDIA:1 G96 [GeForce 9500 GT]
18:54:50: GPU 1: NVIDIA:4 GM107 [GeForce GTX 750 Ti]
18:54:50: CUDA: 5.0
18:54:50: CUDA Driver: 6050
18:54:50:Win32 Service: false
18:54:50:***********************************************************************
18:54:50:<config>
18:54:50: <!-- Folding Slot Configuration -->
18:54:50: <client-type v='advanced'/>
18:54:50:
18:54:50: <!-- Network -->
18:54:50: <proxy v=':8080'/>
18:54:50:
18:54:50: <!-- Slot Control -->
18:54:50: <power v='full'/>
18:54:50:
18:54:50: <!-- User Information -->
18:54:50: <passkey v='********************************'/>
18:54:50: <team v='111065'/>
18:54:50: <user v='maj28'/>
18:54:50:
18:54:50: <!-- Folding Slots -->
18:54:50: <slot id='0' type='GPU'/>
18:54:50: <slot id='1' type='GPU'>
18:54:50: <gpu-index v='0'/>
18:54:50: </slot>
18:54:50: <slot id='2' type='CPU'>
18:54:50: <cpus v='1'/>
18:54:50: </slot>
18:54:50:</config>
18:54:50:Trying to access database...
18:54:50:Successfully acquired database lock
18:54:50:Enabled folding slot 00: READY gpu:1:GM107 [GeForce GTX 750 Ti]
18:54:50:Enabled folding slot 01: READY gpu:0:G96 [GeForce 9500 GT]
18:54:50:Enabled folding slot 02: READY cpu:1
18:54:50:WU02:FS02:Starting
18:54:50:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "E:/_Installed Programs/Folding DATA/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 02 -suffix 01 -version 704 -lifeline 8268 -checkpoint 15 -np 1
18:54:50:WU02:FS02:Started FahCore on PID 6768
18:54:50:WU02:FS02:Core PID:4564
18:54:50:WU02:FS02:FahCore 0xa4 started
18:54:50:WU03:FS00:Starting
18:54:50:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "E:/_Installed Programs/Folding DATA/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe" -dir 03 -suffix 01 -version 704 -lifeline 8268 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
18:54:50:WU03:FS00:Started FahCore on PID 5712
18:54:51:WU03:FS00:Core PID:10496
18:54:51:WU03:FS00:FahCore 0x15 started
18:54:51:WU02:FS02:0xa4:
18:54:51:WU02:FS02:0xa4:*------------------------------*
18:54:51:WU02:FS02:0xa4:Folding@Home Gromacs GB Core
18:54:51:WU02:FS02:0xa4:Version 2.27 (Dec. 15, 2010)
18:54:51:WU02:FS02:0xa4:
18:54:51:WU02:FS02:0xa4:Preparing to commence simulation
18:54:51:WU02:FS02:0xa4:- Looking at optimizations...
18:54:51:WU02:FS02:0xa4:- Files status OK
18:54:51:WU02:FS02:0xa4:- Expanded 881618 -> 1463992 (decompressed 166.0 percent)
18:54:51:WU02:FS02:0xa4:Called DecompressByteArray: compressed_data_size=881618 data_size=1463992, decompressed_data_size=1463992 diff=0
18:54:51:WU02:FS02:0xa4:- Digital signature verified
18:54:51:WU02:FS02:0xa4:
18:54:51:WU02:FS02:0xa4:Project: 9008 (Run 1202, Clone 2, Gen 342)
18:54:51:WU02:FS02:0xa4:
18:54:51:WU02:FS02:0xa4:Assembly optimizations on if available.
18:54:51:WU02:FS02:0xa4:Entering M.D.
18:54:51:WU00:FS01:Connecting to 171.67.108.200:80
18:54:51:WU03:FS00:0x15:
18:54:51:WU03:FS00:0x15:*------------------------------*
18:54:51:WU03:FS00:0x15:Folding@Home GPU Core
18:54:51:WU03:FS00:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
18:54:51:WU03:FS00:0x15:Build host AmoebaRemote
18:54:51:WU03:FS00:0x15:Board Type NVIDIA/CUDA
18:54:51:WU03:FS00:0x15:Core 15
18:54:51:WU03:FS00:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
18:54:51:WU03:FS00:0x15:
18:54:51:WU03:FS00:0x15:Window's signal control handler registered.
18:54:51:WU03:FS00:0x15:Preparing to commence simulation
18:54:51:WU03:FS00:0x15:- Looking at optimizations...
18:54:51:WU03:FS00:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
18:54:51:WU03:FS00:0x15:- Created dyn
18:54:51:WU03:FS00:0x15:- Files status OK
18:54:51:WU03:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
18:54:51:WU03:FS00:0x15:- Expanded 124669 -> 501826 (decompressed 402.5 percent)
18:54:51:WU03:FS00:0x15:Called DecompressByteArray: compressed_data_size=124669 data_size=501826, decompressed_data_size=501826 diff=0
18:54:51:WU03:FS00:0x15:- Digital signature verified
18:54:51:WU03:FS00:0x15:
18:54:51:WU03:FS00:0x15:Project: 7622 (Run 607, Clone 0, Gen 454)
18:54:51:WU03:FS00:0x15:
18:54:51:WU03:FS00:0x15:Assembly optimizations on if available.
18:54:51:WU03:FS00:0x15:Entering M.D.
18:54:52:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
18:54:52:WU00:FS01:Connecting to 171.67.108.204:80
18:54:52:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:54:52:ERROR:WU00:FS01:Exception: Could not get an assignment
18:54:53:WU00:FS01:Connecting to 171.67.108.200:80
18:54:53:WU03:FS00:0x15:Tpr hash 03/wudata_01.tpr: 2918311303 1457264687 521003358 1388416220 1774570557
18:54:53:WU03:FS00:0x15:GPU device id=1
18:54:53:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
18:54:53:WU00:FS01:Connecting to 171.67.108.204:80
18:54:53:WU03:FS00:0x15:Working on Protein
18:54:53:WU03:FS00:0x15:Client config unavailable.
18:54:53:WU03:FS00:0x15:Starting GUI Server
18:54:53:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:54:53:ERROR:WU00:FS01:Exception: Could not get an assignment
18:54:55:16:127.0.0.1:New Web connection
18:54:57:WU02:FS02:0xa4:Mapping NT from 1 to 1
18:54:57:WU02:FS02:0xa4:Completed 0 out of 250000 steps (0%)
18:55:53:WU00:FS01:Connecting to 171.67.108.200:80
18:55:53:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
18:55:53:WU00:FS01:Connecting to 171.67.108.204:80
18:55:54:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:55:54:ERROR:WU00:FS01:Exception: Could not get an assignment
18:55:55:WU03:FS00:0x15:Finished fah_main status=59
18:55:55:WU03:FS00:0x15:mdrun_gpu returned 59
18:55:55:WU03:FS00:0x15:GPU memtest failure
18:55:55:WU03:FS00:0x15:
18:55:55:WU03:FS00:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
18:55:55:WARNING:WU03:FS00:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
18:55:56:WU01:FS00:Starting
18:55:56:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "E:/_Installed Programs/Folding DATA/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe" -dir 01 -suffix 01 -version 704 -lifeline 8268 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
18:55:56:WU01:FS00:Started FahCore on PID 11028
18:55:56:WU01:FS00:Core PID:9380
18:55:56:WU01:FS00:FahCore 0x15 started
18:55:56:WU01:FS00:0x15:
18:55:56:WU01:FS00:0x15:*------------------------------*
18:55:56:WU01:FS00:0x15:Folding@Home GPU Core
18:55:56:WU01:FS00:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
18:55:56:WU01:FS00:0x15:Build host AmoebaRemote
18:55:56:WU01:FS00:0x15:Board Type NVIDIA/CUDA
18:55:56:WU01:FS00:0x15:Core 15
18:55:56:WU01:FS00:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
18:55:56:WU01:FS00:0x15:
18:55:56:WU01:FS00:0x15:Window's signal control handler registered.
18:55:56:WU01:FS00:0x15:Preparing to commence simulation
18:55:56:WU01:FS00:0x15:- Looking at optimizations...
18:55:56:WU01:FS00:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
18:55:56:WU01:FS00:0x15:- Created dyn
18:55:56:WU01:FS00:0x15:- Files status OK
18:55:56:WU01:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
18:55:56:WU01:FS00:0x15:- Expanded 124571 -> 501826 (decompressed 402.8 percent)
18:55:56:WU01:FS00:0x15:Called DecompressByteArray: compressed_data_size=124571 data_size=501826, decompressed_data_size=501826 diff=0
18:55:56:WU01:FS00:0x15:- Digital signature verified
18:55:56:WU01:FS00:0x15:
18:55:56:WU01:FS00:0x15:Project: 7621 (Run 455, Clone 0, Gen 510)
18:55:56:WU01:FS00:0x15:
18:55:56:WU01:FS00:0x15:Assembly optimizations on if available.
18:55:56:WU01:FS00:0x15:Entering M.D.
18:55:58:WU01:FS00:0x15:Tpr hash 01/wudata_01.tpr: 703567589 4278487264 1120916951 2792004550 2557276243
18:55:58:WU01:FS00:0x15:GPU device id=1
18:55:58:WU01:FS00:0x15:Working on Protein
18:55:58:WU01:FS00:0x15:Client config unavailable.
18:55:58:WU01:FS00:0x15:Starting GUI Server
18:57:00:WU01:FS00:0x15:Finished fah_main status=59
18:57:00:WU01:FS00:0x15:mdrun_gpu returned 59
18:57:00:WU01:FS00:0x15:GPU memtest failure
18:57:00:WU01:FS00:0x15:
18:57:00:WU01:FS00:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
18:57:00:WU03:FS00:Starting
18:57:00:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "E:/_Installed Programs/Folding DATA/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe" -dir 03 -suffix 01 -version 704 -lifeline 8268 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
18:57:00:WU03:FS00:Started FahCore on PID 9112
18:57:00:WU03:FS00:Core PID:2960
18:57:00:WU03:FS00:FahCore 0x15 started
18:57:00:WARNING:WU01:FS00:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
18:57:00:WU03:FS00:0x15:
18:57:00:WU03:FS00:0x15:*------------------------------*
18:57:00:WU03:FS00:0x15:Folding@Home GPU Core
18:57:00:WU03:FS00:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
18:57:00:WU03:FS00:0x15:Build host AmoebaRemote
18:57:00:WU03:FS00:0x15:Board Type NVIDIA/CUDA
18:57:00:WU03:FS00:0x15:Core 15
18:57:00:WU03:FS00:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
18:57:00:WU03:FS00:0x15:
18:57:00:WU03:FS00:0x15:Window's signal control handler registered.
18:57:00:WU03:FS00:0x15:Preparing to commence simulation
18:57:00:WU03:FS00:0x15:- Looking at optimizations...
18:57:00:WU03:FS00:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
18:57:00:WU03:FS00:0x15:- Created dyn
18:57:00:WU03:FS00:0x15:- Files status OK
18:57:00:WU03:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
18:57:00:WU03:FS00:0x15:- Expanded 124669 -> 501826 (decompressed 402.5 percent)
18:57:00:WU03:FS00:0x15:Called DecompressByteArray: compressed_data_size=124669 data_size=501826, decompressed_data_size=501826 diff=0
18:57:00:WU03:FS00:0x15:- Digital signature verified
18:57:00:WU03:FS00:0x15:
18:57:00:WU03:FS00:0x15:Project: 7622 (Run 607, Clone 0, Gen 454)
18:57:00:WU03:FS00:0x15:
18:57:00:WU03:FS00:0x15:Assembly optimizations on if available.
18:57:00:WU03:FS00:0x15:Entering M.D.
18:57:02:WU03:FS00:0x15:Tpr hash 03/wudata_01.tpr: 2918311303 1457264687 521003358 1388416220 1774570557
18:57:02:WU03:FS00:0x15:GPU device id=1
18:57:02:WU03:FS00:0x15:Working on Protein
18:57:02:WU03:FS00:0x15:Client config unavailable.
18:57:03:WU03:FS00:0x15:Starting GUI Server
18:57:30:WU00:FS01:Connecting to 171.67.108.200:80
18:57:30:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.200:80': Empty work server assignment
18:57:30:WU00:FS01:Connecting to 171.67.108.204:80
18:57:31:WARNING:WU00:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:57:31:ERROR:WU00:FS01:Exception: Could not get an assignment
Re: GPUs stuck on READY
You need to reinstall if you've moved GPUs. FAH configures itself when it first sees a GPU and the slots are not interchangeable.
The settings mentioned by 7im on the first page apply ONLY to the 9500GT, not to the GTX 750 Ti. Rather than applying those settings to the entire system (after the reinstall) go to Config+slots+pick the 9500GT slot+add ....
Which drivers are you using?
The settings mentioned by 7im on the first page apply ONLY to the 9500GT, not to the GTX 750 Ti. Rather than applying those settings to the entire system (after the reinstall) go to Config+slots+pick the 9500GT slot+add ....
Which drivers are you using?
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: GPUs stuck on READY
Reinstalled, still giving me GPU memtest error, didn't move any slots, running pure, only updated options DIRECTLY on 9500 as suggested and reduced cpu to 2 cores.
Code: Select all
*********************** Log Started 2015-04-23T19:34:45Z ***********************
19:34:45:************************* Folding@home Client *************************
19:34:45: Website: http://folding.stanford.edu/
19:34:45: Copyright: (c) 2009-2014 Stanford University
19:34:45: Author: Joseph Coffland <[email protected]>
19:34:45: Args: --open-web-control
19:34:45: Config: C:/Users/maj28/AppData/Roaming/FAHClient/config.xml
19:34:45:******************************** Build ********************************
19:34:45: Version: 7.4.4
19:34:45: Date: Mar 4 2014
19:34:45: Time: 20:26:54
19:34:45: SVN Rev: 4130
19:34:45: Branch: fah/trunk/client
19:34:45: Compiler: Intel(R) C++ MSVC 1500 mode 1200
19:34:45: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
19:34:45: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
19:34:45: Platform: win32 XP
19:34:45: Bits: 32
19:34:45: Mode: Release
19:34:45:******************************* System ********************************
19:34:45: CPU: AMD Athlon(tm) II X4 640 Processor
19:34:45: CPU ID: AuthenticAMD Family 16 Model 5 Stepping 3
19:34:45: CPUs: 4
19:34:45: Memory: 14.40GiB
19:34:45: Free Memory: 9.04GiB
19:34:45: Threads: WINDOWS_THREADS
19:34:45: OS Version: 6.1
19:34:45: Has Battery: false
19:34:45: On Battery: false
19:34:45: UTC Offset: -4
19:34:45: PID: 11140
19:34:45: CWD: C:/Users/maj28/AppData/Roaming/FAHClient
19:34:45: OS: Windows 7 Professional
19:34:45: OS Arch: AMD64
19:34:45: GPUs: 2
19:34:45: GPU 0: NVIDIA:1 G96 [GeForce 9500 GT]
19:34:45: GPU 1: NVIDIA:4 GM107 [GeForce GTX 750 Ti]
19:34:45: CUDA: 5.0
19:34:45: CUDA Driver: 6050
19:34:45:Win32 Service: false
19:34:45:***********************************************************************
19:34:45:<config>
19:34:45: <!-- Network -->
19:34:45: <proxy v=':8080'/>
19:34:45:
19:34:45: <!-- User Information -->
19:34:45: <passkey v='********************************'/>
19:34:45: <team v='111065'/>
19:34:45: <user v='maj28'/>
19:34:45:
19:34:45: <!-- Folding Slots -->
19:34:45: <slot id='0' type='CPU'/>
19:34:45: <slot id='1' type='GPU'>
19:34:45: <client-type v='beta'/>
19:34:45: <max-packet-size v='small'/>
19:34:45: <next-unit-percentage v='100'/>
19:34:45: </slot>
19:34:45: <slot id='2' type='GPU'/>
19:34:45:</config>
19:34:45:Trying to access database...
19:34:45:Successfully acquired database lock
19:34:45:Enabled folding slot 00: READY cpu:1
19:34:45:Enabled folding slot 01: READY gpu:0:G96 [GeForce 9500 GT]
19:34:45:Enabled folding slot 02: READY gpu:1:GM107 [GeForce GTX 750 Ti]
19:34:45:WU00:FS00:Starting
19:34:45:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15
19:34:45:WU00:FS00:Started FahCore on PID 8996
19:34:45:WU00:FS00:Core PID:2480
19:34:45:WU00:FS00:FahCore 0xa4 started
19:34:45:WU02:FS02:Starting
19:34:45:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 02 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
19:34:45:WU02:FS02:Started FahCore on PID 7500
19:34:45:WU02:FS02:Core PID:3724
19:34:46:WU02:FS02:FahCore 0x15 started
19:34:46:WU01:FS01:Connecting to 171.67.108.200:80
19:34:46:WU00:FS00:0xa4:
19:34:46:WU00:FS00:0xa4:*------------------------------*
19:34:46:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
19:34:46:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
19:34:46:WU00:FS00:0xa4:
19:34:46:WU00:FS00:0xa4:Preparing to commence simulation
19:34:46:WU00:FS00:0xa4:- Looking at optimizations...
19:34:46:WU00:FS00:0xa4:- Files status OK
19:34:46:WU00:FS00:0xa4:- Expanded 918266 -> 1523092 (decompressed 165.8 percent)
19:34:46:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=918266 data_size=1523092, decompressed_data_size=1523092 diff=0
19:34:46:WU00:FS00:0xa4:- Digital signature verified
19:34:46:WU00:FS00:0xa4:
19:34:46:WU00:FS00:0xa4:Project: 9010 (Run 179, Clone 0, Gen 265)
19:34:46:WU00:FS00:0xa4:
19:34:46:WU00:FS00:0xa4:Assembly optimizations on if available.
19:34:46:WU00:FS00:0xa4:Entering M.D.
19:34:46:WU02:FS02:0x15:
19:34:46:WU02:FS02:0x15:*------------------------------*
19:34:46:WU02:FS02:0x15:Folding@Home GPU Core
19:34:46:WU02:FS02:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:34:46:WU02:FS02:0x15:Build host AmoebaRemote
19:34:46:WU02:FS02:0x15:Board Type NVIDIA/CUDA
19:34:46:WU02:FS02:0x15:Core 15
19:34:46:WU02:FS02:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:34:46:WU02:FS02:0x15:
19:34:46:WU02:FS02:0x15:Window's signal control handler registered.
19:34:46:WU02:FS02:0x15:Preparing to commence simulation
19:34:46:WU02:FS02:0x15:- Looking at optimizations...
19:34:46:WU02:FS02:0x15:- Files status OK
19:34:46:WU02:FS02:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:34:46:WU02:FS02:0x15:- Expanded 145873 -> 660986 (decompressed 453.1 percent)
19:34:46:WU02:FS02:0x15:Called DecompressByteArray: compressed_data_size=145873 data_size=660986, decompressed_data_size=660986 diff=0
19:34:46:WU02:FS02:0x15:- Digital signature verified
19:34:46:WU02:FS02:0x15:
19:34:46:WU02:FS02:0x15:Project: 8018 (Run 51, Clone 1, Gen 396)
19:34:46:WU02:FS02:0x15:
19:34:46:WU02:FS02:0x15:Assembly optimizations on if available.
19:34:46:WU02:FS02:0x15:Entering M.D.
19:34:47:WU01:FS01:Assigned to work server 171.64.65.105
19:34:47:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:G96 [GeForce 9500 GT] from 171.64.65.105
19:34:47:WU01:FS01:Connecting to 171.64.65.105:8080
19:34:47:WU01:FS01:Downloading 122.89KiB
19:34:48:WU02:FS02:0x15:Tpr hash 02/wudata_01.tpr: 4288705596 2149170822 2455514128 2263003132 871179151
19:34:48:WU02:FS02:0x15:GPU device id=1
19:34:48:WU02:FS02:0x15:Working on GRowing Old MAkes el Chrono Sweat
19:34:48:WU02:FS02:0x15:Client config unavailable.
19:34:48:WU01:FS01:Download complete
19:34:48:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:7620 run:95 clone:0 gen:499 core:0x15 unit:0x0000029a664f2dd14e42f42cede074b6
19:34:48:WU01:FS01:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/beta/Core_15.fah
19:34:48:WU01:FS01:Connecting to web.stanford.edu:80
19:34:48:WU02:FS02:0x15:Starting GUI Server
19:34:48:WU01:FS01:FahCore 15: Downloading 1.88MiB
19:34:51:WU01:FS01:FahCore 15: Download complete
19:34:51:WU01:FS01:Valid core signature
19:34:51:WU01:FS01:Unpacked 7.71MiB to cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/beta/Core_15.fah/FahCore_15.exe
19:34:51:WU01:FS01:Starting
19:34:51:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/beta/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
19:34:51:WU01:FS01:Started FahCore on PID 11224
19:34:52:WU01:FS01:Core PID:11008
19:34:52:WU01:FS01:FahCore 0x15 started
19:34:52:WU00:FS00:0xa4:Mapping NT from 1 to 1
19:34:52:WU01:FS01:0x15:
19:34:52:WU01:FS01:0x15:*------------------------------*
19:34:52:WU01:FS01:0x15:Folding@Home GPU Core
19:34:52:WU01:FS01:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:34:52:WU01:FS01:0x15:Build host AmoebaRemote
19:34:52:WU01:FS01:0x15:Board Type NVIDIA/CUDA
19:34:52:WU01:FS01:0x15:Core 15
19:34:52:WU01:FS01:0x15:
19:34:52:WU01:FS01:0x15:Window's signal control handler registered.
19:34:52:WU01:FS01:0x15:Preparing to commence simulation
19:34:52:WU01:FS01:0x15:- Looking at optimizations...
19:34:52:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
19:34:52:WU01:FS01:0x15:- Created dyn
19:34:52:WU01:FS01:0x15:- Files status OK
19:34:52:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:34:52:WU01:FS01:0x15:- Expanded 125328 -> 501826 (decompressed 400.4 percent)
19:34:52:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=125328 data_size=501826, decompressed_data_size=501826 diff=0
19:34:52:WU01:FS01:0x15:- Digital signature verified
19:34:52:WU01:FS01:0x15:
19:34:52:WU01:FS01:0x15:Project: 7620 (Run 95, Clone 0, Gen 499)
19:34:52:WU01:FS01:0x15:
19:34:52:WU01:FS01:0x15:Assembly optimizations on if available.
19:34:52:WU01:FS01:0x15:Entering M.D.
19:34:53:WU00:FS00:0xa4:Completed 0 out of 250000 steps (0%)
19:34:54:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr: 3344617827 3211717260 3426742460 3878044266 3364718564
19:34:54:WU01:FS01:0x15:GPU device id=0
19:34:54:WU01:FS01:0x15:Working on Protein
19:34:54:WU01:FS01:0x15:Client config unavailable.
19:34:54:WU01:FS01:0x15:Starting GUI Server
19:35:58:WU01:FS01:0x15:Setting checkpoint frequency: 400000
19:35:58:WU01:FS01:0x15:Completed 3 out of 40000000 steps (0%).
19:36:03:WU02:FS02:0x15:Finished fah_main status=59
19:36:03:WU02:FS02:0x15:mdrun_gpu returned 59
19:36:03:WU02:FS02:0x15:GPU memtest failure
19:36:03:WU02:FS02:0x15:
19:36:03:WU02:FS02:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
19:36:04:WARNING:WU02:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
19:36:05:WU02:FS02:Starting
19:36:05:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 02 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
19:36:05:WU02:FS02:Started FahCore on PID 9208
19:36:05:WU02:FS02:Core PID:9892
19:36:05:WU02:FS02:FahCore 0x15 started
19:36:05:WU02:FS02:0x15:
19:36:05:WU02:FS02:0x15:*------------------------------*
19:36:05:WU02:FS02:0x15:Folding@Home GPU Core
19:36:05:WU02:FS02:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:36:05:WU02:FS02:0x15:Build host AmoebaRemote
19:36:05:WU02:FS02:0x15:Board Type NVIDIA/CUDA
19:36:05:WU02:FS02:0x15:Core 15
19:36:05:WU02:FS02:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:36:05:WU02:FS02:0x15:
19:36:05:WU02:FS02:0x15:Window's signal control handler registered.
19:36:05:WU02:FS02:0x15:Preparing to commence simulation
19:36:05:WU02:FS02:0x15:- Looking at optimizations...
19:36:05:WU02:FS02:0x15:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp
19:36:05:WU02:FS02:0x15:- Created dyn
19:36:05:WU02:FS02:0x15:- Files status OK
19:36:05:WU02:FS02:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:36:05:WU02:FS02:0x15:- Expanded 145873 -> 660986 (decompressed 453.1 percent)
19:36:05:WU02:FS02:0x15:Called DecompressByteArray: compressed_data_size=145873 data_size=660986, decompressed_data_size=660986 diff=0
19:36:05:WU02:FS02:0x15:- Digital signature verified
19:36:05:WU02:FS02:0x15:
19:36:05:WU02:FS02:0x15:Project: 8018 (Run 51, Clone 1, Gen 396)
19:36:05:WU02:FS02:0x15:
19:36:05:WU02:FS02:0x15:Assembly optimizations on if available.
19:36:05:WU02:FS02:0x15:Entering M.D.
19:36:07:WU02:FS02:0x15:Tpr hash 02/wudata_01.tpr: 4288705596 2149170822 2455514128 2263003132 871179151
19:36:07:WU02:FS02:0x15:GPU device id=1
19:36:07:WU02:FS02:0x15:Working on GRowing Old MAkes el Chrono Sweat
19:36:07:WU02:FS02:0x15:Client config unavailable.
19:36:07:WU02:FS02:0x15:Starting GUI Server
19:37:22:WU02:FS02:0x15:Finished fah_main status=59
19:37:22:WU02:FS02:0x15:mdrun_gpu returned 59
19:37:22:WU02:FS02:0x15:GPU memtest failure
19:37:22:WU02:FS02:0x15:
19:37:22:WU02:FS02:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
19:37:23:WARNING:WU02:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
19:37:23:WARNING:WU02:FS02:Too many errors, failing
19:37:23:WU02:FS02:Sending unit results: id:02 state:SEND error:FAILED project:8018 run:51 clone:1 gen:396 core:0x15 unit:0x000001d36953ee2e500f1b746e4444e2
19:37:23:WU02:FS02:Connecting to 171.67.108.142:8080
19:37:23:WU02:FS02:Server responded WORK_QUIT (404)
19:37:23:WARNING:WU02:FS02:Server did not like results, dumping
19:37:23:WU02:FS02:Cleaning up
19:37:23:WU03:FS02:Connecting to 171.67.108.200:80
19:37:24:WU03:FS02:Assigned to work server 171.67.108.142
19:37:24:WU03:FS02:Requesting new work unit for slot 02: READY gpu:1:GM107 [GeForce GTX 750 Ti] from 171.67.108.142
19:37:24:WU03:FS02:Connecting to 171.67.108.142:8080
19:37:24:WU03:FS02:Downloading 142.95KiB
19:37:24:WU03:FS02:Download complete
19:37:25:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:8018 run:51 clone:1 gen:396 core:0x15 unit:0x000001d46953ee2e500f1b746e4444e2
19:37:25:WU03:FS02:Starting
19:37:25:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 03 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
19:37:25:WU03:FS02:Started FahCore on PID 3360
19:37:25:WU03:FS02:Core PID:6668
19:37:25:WU03:FS02:FahCore 0x15 started
19:37:25:WU03:FS02:0x15:
19:37:25:WU03:FS02:0x15:*------------------------------*
19:37:25:WU03:FS02:0x15:Folding@Home GPU Core
19:37:25:WU03:FS02:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:37:25:WU03:FS02:0x15:Build host AmoebaRemote
19:37:25:WU03:FS02:0x15:Board Type NVIDIA/CUDA
19:37:25:WU03:FS02:0x15:Core 15
19:37:25:WU03:FS02:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:37:25:WU03:FS02:0x15:
19:37:25:WU03:FS02:0x15:Window's signal control handler registered.
19:37:25:WU03:FS02:0x15:Preparing to commence simulation
19:37:25:WU03:FS02:0x15:- Looking at optimizations...
19:37:25:WU03:FS02:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
19:37:25:WU03:FS02:0x15:- Created dyn
19:37:25:WU03:FS02:0x15:- Files status OK
19:37:25:WU03:FS02:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:37:25:WU03:FS02:0x15:- Expanded 145873 -> 660986 (decompressed 453.1 percent)
19:37:25:WU03:FS02:0x15:Called DecompressByteArray: compressed_data_size=145873 data_size=660986, decompressed_data_size=660986 diff=0
19:37:25:WU03:FS02:0x15:- Digital signature verified
19:37:25:WU03:FS02:0x15:
19:37:25:WU03:FS02:0x15:Project: 8018 (Run 51, Clone 1, Gen 396)
19:37:25:WU03:FS02:0x15:
19:37:25:WU03:FS02:0x15:Assembly optimizations on if available.
19:37:25:WU03:FS02:0x15:Entering M.D.
19:37:27:WU03:FS02:0x15:Tpr hash 03/wudata_01.tpr: 4288705596 2149170822 2455514128 2263003132 871179151
19:37:27:WU03:FS02:0x15:GPU device id=1
19:37:27:WU03:FS02:0x15:Working on GRowing Old MAkes el Chrono Sweat
19:37:27:WU03:FS02:0x15:Client config unavailable.
19:37:27:WU03:FS02:0x15:Starting GUI Server
19:38:42:WU03:FS02:0x15:Finished fah_main status=59
19:38:42:WU03:FS02:0x15:mdrun_gpu returned 59
19:38:42:WU03:FS02:0x15:GPU memtest failure
19:38:42:WU03:FS02:0x15:
19:38:42:WU03:FS02:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
19:38:43:WARNING:WU03:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
19:38:43:WU03:FS02:Starting
19:38:43:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 03 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
19:38:43:WU03:FS02:Started FahCore on PID 8576
19:38:43:WU03:FS02:Core PID:10276
19:38:43:WU03:FS02:FahCore 0x15 started
19:38:44:WU03:FS02:0x15:
19:38:44:WU03:FS02:0x15:*------------------------------*
19:38:44:WU03:FS02:0x15:Folding@Home GPU Core
19:38:44:WU03:FS02:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:38:44:WU03:FS02:0x15:Build host AmoebaRemote
19:38:44:WU03:FS02:0x15:Board Type NVIDIA/CUDA
19:38:44:WU03:FS02:0x15:Core 15
19:38:44:WU03:FS02:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:38:44:WU03:FS02:0x15:
19:38:44:WU03:FS02:0x15:Window's signal control handler registered.
19:38:44:WU03:FS02:0x15:Preparing to commence simulation
19:38:44:WU03:FS02:0x15:- Looking at optimizations...
19:38:44:WU03:FS02:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
19:38:44:WU03:FS02:0x15:- Created dyn
19:38:44:WU03:FS02:0x15:- Files status OK
19:38:44:WU03:FS02:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:38:44:WU03:FS02:0x15:- Expanded 145873 -> 660986 (decompressed 453.1 percent)
19:38:44:WU03:FS02:0x15:Called DecompressByteArray: compressed_data_size=145873 data_size=660986, decompressed_data_size=660986 diff=0
19:38:44:WU03:FS02:0x15:- Digital signature verified
19:38:44:WU03:FS02:0x15:
19:38:44:WU03:FS02:0x15:Project: 8018 (Run 51, Clone 1, Gen 396)
19:38:44:WU03:FS02:0x15:
19:38:44:WU03:FS02:0x15:Assembly optimizations on if available.
19:38:44:WU03:FS02:0x15:Entering M.D.
19:38:46:WU03:FS02:0x15:Tpr hash 03/wudata_01.tpr: 4288705596 2149170822 2455514128 2263003132 871179151
19:38:46:WU03:FS02:0x15:GPU device id=1
19:38:46:WU03:FS02:0x15:Working on GRowing Old MAkes el Chrono Sweat
19:38:46:WU03:FS02:0x15:Client config unavailable.
19:38:46:WU03:FS02:0x15:Starting GUI Server
19:40:01:WU03:FS02:0x15:Finished fah_main status=59
19:40:01:WU03:FS02:0x15:mdrun_gpu returned 59
19:40:01:WU03:FS02:0x15:GPU memtest failure
19:40:01:WU03:FS02:0x15:
19:40:01:WU03:FS02:0x15:Folding@home Core Shutdown: GPU_MEMTEST_ERROR
19:40:02:WARNING:WU03:FS02:FahCore returned: GPU_MEMTEST_ERROR (124 = 0x7c)
19:40:02:WU03:FS02:Starting
19:40:02:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/maj28/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 03 -suffix 01 -version 704 -lifeline 11140 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
19:40:02:WU03:FS02:Started FahCore on PID 5860
19:40:02:WU03:FS02:Core PID:10500
19:40:02:WU03:FS02:FahCore 0x15 started
19:40:03:WU03:FS02:0x15:
19:40:03:WU03:FS02:0x15:*------------------------------*
19:40:03:WU03:FS02:0x15:Folding@Home GPU Core
19:40:03:WU03:FS02:0x15:Version 2.25 (Wed May 9 17:03:01 EDT 2012)
19:40:03:WU03:FS02:0x15:Build host AmoebaRemote
19:40:03:WU03:FS02:0x15:Board Type NVIDIA/CUDA
19:40:03:WU03:FS02:0x15:Core 15
19:40:03:WU03:FS02:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:40:03:WU03:FS02:0x15:
19:40:03:WU03:FS02:0x15:Window's signal control handler registered.
19:40:03:WU03:FS02:0x15:Preparing to commence simulation
19:40:03:WU03:FS02:0x15:- Looking at optimizations...
19:40:03:WU03:FS02:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
19:40:03:WU03:FS02:0x15:- Created dyn
19:40:03:WU03:FS02:0x15:- Files status OK
19:40:03:WU03:FS02:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:40:03:WU03:FS02:0x15:- Expanded 145873 -> 660986 (decompressed 453.1 percent)
19:40:03:WU03:FS02:0x15:Called DecompressByteArray: compressed_data_size=145873 data_size=660986, decompressed_data_size=660986 diff=0
19:40:03:WU03:FS02:0x15:- Digital signature verified
19:40:03:WU03:FS02:0x15:
19:40:03:WU03:FS02:0x15:Project: 8018 (Run 51, Clone 1, Gen 396)
19:40:03:WU03:FS02:0x15:
19:40:03:WU03:FS02:0x15:Assembly optimizations on if available.
19:40:03:WU03:FS02:0x15:Entering M.D.
19:40:05:WU03:FS02:0x15:Tpr hash 03/wudata_01.tpr: 4288705596 2149170822 2455514128 2263003132 871179151
19:40:05:WU03:FS02:0x15:GPU device id=1
19:40:05:WU03:FS02:0x15:Working on GRowing Old MAkes el Chrono Sweat
19:40:05:WU03:FS02:0x15:Client config unavailable.
19:40:05:WU03:FS02:0x15:Starting GUI Server
-
7im
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: GPUs stuck on READY
Delete the slot for the 750 Ti. It shouldn't be getting core_15 work units. So either it's a left over from before, or some kind of glitch. Needs to go. Then add that slot back in manually.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.