The project reached 29% completion twice; the second time, it also decided to re-download FahCore_a1.exe! The third time trying, the entire system crashed somewhere around 3%.
The new log indicates it uploaded 2 WUs (?) and is attempting the broken WU yet again. (!) I'll back up my queue.dat and \Work directory just in case, and delete them to get a fresh one now.
QFIX log:
Code: Select all
entry 2, status 0, address 171.64.65.63:8080
Found results <work\wuresults_02.dat>: proj 3062, run 3, clone 84, gen 13
-- queue entry: proj 3062, run 3, clone 84, gen 13
-- expired
entry 3, status 0, address 171.64.65.63:8080
entry 4, status 0, address 171.64.65.63:8080
entry 5, status 0, address 171.64.65.63:8080
entry 6, status 0, address 171.64.65.63:8080
entry 7, status 0, address 171.64.65.63:8080
entry 8, status 0, address 171.64.65.63:8080
entry 9, status 0, address 171.64.65.63:8080
Found results <work\wuresults_09.dat>: proj 3064, run 0, clone 161, gen 4
-- queue entry: proj 3064, run 0, clone 161, gen 4
-- requeued for upload
entry 0, status 0, address 171.64.65.63:8080
Found results <work\wuresults_00.dat>: proj 3064, run 0, clone 161, gen 4
-- queue entry: proj 3064, run 0, clone 161, gen 4
-- requeued for upload
entry 1, status 1, address 171.64.65.63:8080
Found results <work\wuresults_01.dat>: proj 3062, run 3, clone 84, gen 13
-- queue entry: proj 3064, run 0, clone 161, gen 4
-- doesn't match queue entry
File needed repair. Errors fixed: 2.
Code: Select all
[12:38:01] + Attempting to send results
[12:38:01] - Reading file work/wuresults_08.dat from core
[12:38:01] (Read 2270505 bytes from disk)
[12:38:01] Connecting to http://171.64.65.63:8080/
[12:38:20] Posted data.
[12:38:21] Initial: 0000; - Uploaded at ~110 kB/s
[12:38:21] - Averaged speed for that direction ~113 kB/s
[12:38:21] + Results successfully sent
[12:38:21] Thank you for your contribution to Folding@Home.
[12:38:21] + Number of Units Completed: 22
[12:40:25] - Warning: Could not delete all work unit files (8): Core returned invalid code
[12:40:25] Trying to send all finished work units
[12:40:25] + No unsent completed units remaining.
[12:40:25] - Preparing to get new work unit...
[12:40:25] + Attempting to get work packet
[12:40:25] - Will indicate memory of 2046 MB
[12:40:25] - Connecting to assignment server
[12:40:25] Connecting to http://assign.stanford.edu:8080/
[12:40:26] Posted data.
[12:40:26] Initial: 40AB; - Successful: assigned to (171.64.65.63).
[12:40:26] + News From Folding@Home: Welcome to Folding@Home
[12:40:26] Loaded queue successfully.
[12:40:26] Connecting to http://171.64.65.63:8080/
[12:40:27] Posted data.
[12:40:27] Initial: 0000; - Receiving payload (expected size: 608437)
[12:40:29] - Downloaded at ~297 kB/s
[12:40:29] - Averaged speed for that direction ~403 kB/s
[12:40:29] + Received work.
[12:40:29] Trying to send all finished work units
[12:40:29] + No unsent completed units remaining.
[12:40:29] + Closed connections
[12:40:29]
[12:40:29] + Processing work unit
[12:40:29] Core required: FahCore_a1.exe
[12:40:29] Core found.
[12:40:29] Working on Unit 09 [April 28 12:40:29]
[12:40:29] + Working ...
[12:40:29] - Calling 'mpiexec -channel shm -env MPICH_USE_SMP_OPTIMIZATIONS 1 -np 4 FahCore_a1.exe -dir work/ -suffix 09 -checkpoint 15 -verbose -lifeline 3664 -version 592'
[12:40:29]
[12:40:29] *------------------------------*
[12:40:29] Folding@Home Gromacs SMP Core
[12:40:29] Version 1.76 (February 23, 2008)
[12:40:29]
[12:40:29] Preparing to commence simulation
[12:40:29] - Looking at optimizations...
[12:40:29] - Created dyn
[12:40:29] - Files status OK
[12:40:29] this execution.
[12:40:29] - Previous termination of core was improper.
[12:40:29] - Files status OK
[12:40:30] l work packet
[12:40:30]
[12:40:30] Project: 3064 (Run 0, Clone 161, Gen 4)
[12:40:30]
[12:40:30] Assembly optimizations on if available.
[12:40:30] Entering M.D.
[12:40:30] Run 0, Clone 161, Gen 4)
[12:40:30]
[12:40:30] Entering M.D.
[12:40:36] Protein:Extra SSE boost OK.
[12:40:36] Writing local files
[12:40:36] Extra SSE boost OK.
[12:40:36]
[12:40:36] Extra SSE boost OK.
[12:40:36] Writing local files
[12:40:37] Completed 0 out of 5000000 steps (0 percent)
[12:50:35] Writing local files
[12:50:35] Completed 50000 out of 5000000 steps (1 percent)
[13:00:33] Writing local files
[13:00:33] Completed 100000 out of 5000000 steps (2 percent)
[13:10:31] Writing local files
[13:10:31] Completed 150000 out of 5000000 steps (3 percent)
[13:20:06] Writing local files
[13:20:06] Completed 200000 out of 5000000 steps (4 percent)
[13:30:03] Writing local files
[13:30:03] Completed 250000 out of 5000000 steps (5 percent)
[13:39:59] Writing local files
[13:39:59] Completed 300000 out of 5000000 steps (6 percent)
[13:48:41] - Autosending finished units...
[13:48:41] Trying to send all finished work units
[13:48:41] + No unsent completed units remaining.
[13:48:41] - Autosend completed
[13:49:56] Writing local files
[13:49:56] Completed 350000 out of 5000000 steps (7 percent)
[13:59:52] Writing local files
[13:59:52] Completed 400000 out of 5000000 steps (8 percent)
[14:09:47] Writing local files
[14:09:47] Completed 450000 out of 5000000 steps (9 percent)
[14:19:42] Writing local files
[14:19:42] Completed 500000 out of 5000000 steps (10 percent)
[14:29:39] Writing local files
[14:29:39] Completed 550000 out of 5000000 steps (11 percent)
[14:39:14] Writing local files
[14:39:14] Completed 600000 out of 5000000 steps (12 percent)
[14:49:13] Writing local files
[14:49:13] Completed 650000 out of 5000000 steps (13 percent)
[14:59:12] Writing local files
[14:59:12] Completed 700000 out of 5000000 steps (14 percent)
[15:09:12] Writing local files
[15:09:12] Completed 750000 out of 5000000 steps (15 percent)
[15:19:11] Writing local files
[15:19:12] Completed 800000 out of 5000000 steps (16 percent)
[15:29:09] Writing local files
[15:29:09] Completed 850000 out of 5000000 steps (17 percent)
[15:39:08] Writing local files
[15:39:08] Completed 900000 out of 5000000 steps (18 percent)
[15:49:06] Writing local files
[15:49:06] Completed 950000 out of 5000000 steps (19 percent)
[15:59:05] Writing local files
[15:59:05] Completed 1000000 out of 5000000 steps (20 percent)
[16:08:31] Writing local files
[16:08:31] Completed 1050000 out of 5000000 steps (21 percent)
[16:18:30] Writing local files
[16:18:30] Completed 1100000 out of 5000000 steps (22 percent)
[16:28:29] Writing local files
[16:28:29] Completed 1150000 out of 5000000 steps (23 percent)
[16:38:27] Writing local files
[16:38:27] Completed 1200000 out of 5000000 steps (24 percent)
[16:48:26] Writing local files
[16:48:26] Completed 1250000 out of 5000000 steps (25 percent)
[16:58:25] Writing local files
[16:58:25] Completed 1300000 out of 5000000 steps (26 percent)
[17:08:24] Writing local files
[17:08:24] Completed 1350000 out of 5000000 steps (27 percent)
[17:18:23] Writing local files
[17:18:23] Completed 1400000 out of 5000000 steps (28 percent)
[17:28:20] Writing local files
[17:28:20] Completed 1450000 out of 5000000 steps (29 percent)
[17:33:55] Gromacs cannot continue further.
[17:33:55] Going to send back what have done.
[17:33:55] logfile size: 45436
[17:33:55] - Writing 45972 bytes of core data to disk...
[17:33:56] ... Done.
[17:33:56] - Failed to delete work/wudata_09.sas
[17:33:56] - Failed to delete work/wudata_09.goe
[17:33:56] Warning: check for stray files
[17:33:56]
[17:33:56] Folding@home Core Shutdown: EARLY_UNIT_END
[17:33:56]
[17:33:56] Folding@home Core Shutdown: EARLY_UNIT_END
[17:33:59] CoreStatus = 63 (99)
[17:33:59] + Error starting Folding@Home core or unexpected system termination of core.
[17:34:04]
[17:34:04] + Processing work unit
[17:34:04] Core required: FahCore_a1.exe
[17:34:04] Core found.
[17:34:04] Working on Unit 09 [April 28 17:34:04]
[17:34:04] + Working ...
[17:34:04] - Calling 'mpiexec -channel shm -env MPICH_USE_SMP_OPTIMIZATIONS 1 -np 4 FahCore_a1.exe -dir work/ -suffix 09 -checkpoint 15 -verbose -lifeline 3664 -version 592'
[17:34:05]
[17:34:05] *------------------------------*
[17:34:05] Folding@Home Gromacs SMP Core
[17:34:05] Version 1.76 (February 23, 2008)
[17:34:05]
[17:34:05] Preparing to commence simulation
[17:34:05] - Ensuring status. Please wait.
[17:34:22] - Looking at optimizations...
[17:34:22] - Working with standard loops on this execution.
[17:34:22] - Previous termination of core was improper.
[17:34:22] - Files status OK
[17:36:22]
[17:36:22] Folding@home Core Shutdown: MISSING_WORK_FILES
[17:36:22] Finalizing output
[17:36:25] CoreStatus = 1 (1)
[17:36:25] Client-core communications error: ERROR 0x1
[17:36:25] Deleting current work unit & continuing...
[17:38:45] - Warning: Could not delete all work unit files (9): Core returned invalid code
[17:38:45] Trying to send all finished work units
[17:38:45] + No unsent completed units remaining.
[17:38:45] - Preparing to get new work unit...
[17:38:45] + Attempting to get work packet
[17:38:45] - Will indicate memory of 2046 MB
[17:38:45] - Connecting to assignment server
[17:38:45] Connecting to http://assign.stanford.edu:8080/
[17:38:45] Posted data.
[17:38:45] Initial: 40AB; - Successful: assigned to (171.64.65.63).
[17:38:45] + News From Folding@Home: Welcome to Folding@Home
[17:38:45] Loaded queue successfully.
[17:38:45] Connecting to http://171.64.65.63:8080/
[17:38:46] Posted data.
[17:38:46] Initial: 0000; - Receiving payload (expected size: 608437)
[17:38:48] - Downloaded at ~297 kB/s
[17:38:48] - Averaged speed for that direction ~382 kB/s
[17:38:48] + Received work.
[17:38:48] + Closed connections
[17:38:53]
[17:38:53] + Processing work unit
[17:38:53] Core required: FahCore_a1.exe
[17:38:53] Core found.
[17:38:53] Working on Unit 00 [April 28 17:38:53]
[17:38:53] + Working ...
[17:38:53] - Calling 'mpiexec -channel shm -env MPICH_USE_SMP_OPTIMIZATIONS 1 -np 4 FahCore_a1.exe -dir work/ -suffix 00 -checkpoint 15 -verbose -lifeline 3664 -version 592'
[17:38:53]
[17:38:53] *------------------------------*
[17:38:53] Folding@Home Gromacs SMP Core
[17:38:53] Version 1.76 (February 23, 2008)
[17:38:53]
[17:38:53] Preparing to commence simulation
[17:38:53] - Ensuring status. Please wait.
[17:39:10] - Looking at optimizations...
[17:39:10] - Working with standard loops on this execution.
[17:39:10] - Created dyn
[17:39:10] - Files status OK
[17:39:11] - Expanded 607925 -> 3255941 (decompressed 535.5 percent)
[17:39:11] - Starting from initial work packet
[17:39:11]
[17:39:11] Project: 3064 (Run 0, Clone 161, Gen 4)
[17:39:11]
[17:39:11] Entering M.D.
[17:39:17] Protein: p3064_lambdaProtein: p3064_lambda5_2003Extra SSE boost OK.
[17:39:17]
[17:39:17] Extra SSE boost OK.
[17:39:17] Writing local files
[17:39:17] Completed 0 out of 5000000 steps (0 percent)
[17:49:24] Writing local files
[17:49:24] Completed 50000 out of 5000000 steps (1 percent)
[17:59:30] Writing local files
[17:59:30] Completed 100000 out of 5000000 steps (2 percent)
[18:09:36] Writing local files
[18:09:36] Completed 150000 out of 5000000 steps (3 percent)
[18:19:42] Writing local files
[18:19:42] Completed 200000 out of 5000000 steps (4 percent)
[18:29:50] Writing local files
[18:29:50] Completed 250000 out of 5000000 steps (5 percent)
[18:39:57] Writing local files
[18:39:57] Completed 300000 out of 5000000 steps (6 percent)
[18:50:04] Writing local files
[18:50:04] Completed 350000 out of 5000000 steps (7 percent)
[18:59:53] Writing local files
[18:59:53] Completed 400000 out of 5000000 steps (8 percent)
[19:10:05] Writing local files
[19:10:05] Completed 450000 out of 5000000 steps (9 percent)
[19:20:18] Writing local files
[19:20:18] Completed 500000 out of 5000000 steps (10 percent)
[19:30:30] Writing local files
[19:30:30] Completed 550000 out of 5000000 steps (11 percent)
[19:40:42] Writing local files
[19:40:42] Completed 600000 out of 5000000 steps (12 percent)
[19:48:41] - Autosending finished units...
[19:48:41] Trying to send all finished work units
[19:48:41] + No unsent completed units remaining.
[19:48:41] - Autosend completed
[19:50:55] Writing local files
[19:50:55] Completed 650000 out of 5000000 steps (13 percent)
[20:01:09] Writing local files
[20:01:09] Completed 700000 out of 5000000 steps (14 percent)
[20:11:22] Writing local files
[20:11:23] Completed 750000 out of 5000000 steps (15 percent)
[20:21:14] Writing local files
[20:21:14] Completed 800000 out of 5000000 steps (16 percent)
[20:31:28] Writing local files
[20:31:28] Completed 850000 out of 5000000 steps (17 percent)
[20:41:42] Writing local files
[20:41:42] Completed 900000 out of 5000000 steps (18 percent)
[20:51:57] Writing local files
[20:51:57] Completed 950000 out of 5000000 steps (19 percent)
[21:02:11] Writing local files
[21:02:11] Completed 1000000 out of 5000000 steps (20 percent)
[21:12:27] Writing local files
[21:12:27] Completed 1050000 out of 5000000 steps (21 percent)
[21:22:43] Writing local files
[21:22:43] Completed 1100000 out of 5000000 steps (22 percent)
[21:32:57] Writing local files
[21:32:57] Completed 1150000 out of 5000000 steps (23 percent)
[21:43:00] Writing local files
[21:43:00] Completed 1200000 out of 5000000 steps (24 percent)
[21:53:00] Writing local files
[21:53:00] Completed 1250000 out of 5000000 steps (25 percent)
[22:03:33] Writing local files
[22:03:33] Completed 1300000 out of 5000000 steps (26 percent)
[22:13:47] Writing local files
[22:13:47] Completed 1350000 out of 5000000 steps (27 percent)
[22:23:57] Writing local files
[22:23:57] Completed 1400000 out of 5000000 steps (28 percent)
[22:34:05] Writing local files
[22:34:05] Completed 1450000 out of 5000000 steps (29 percent)
[22:40:02] Gromacs cannot continue further.
[22:40:02] Going to send back what have done.
[22:40:02] logfile size: 45437
[22:40:02] - Writing 45973 bytes of core data to disk...
[22:40:02] ... Done.
[22:40:02] - Failed to delete work/wudata_00.sas
[22:40:02] - Failed to delete work/wudata_00.goe
[22:40:02] Warning: check for stray files
[22:40:02]
[22:40:02] Folding@home Core Shutdown: EARLY_UNIT_END
[22:40:02]
[22:40:02] Folding@home Core Shutdown: EARLY_UNIT_END
[22:40:06] CoreStatus = 63 (99)
[22:40:06] + Error starting Folding@Home core or unexpected system termination of core.
[22:40:06] - Attempting to download new core...
[22:40:06] + Downloading new core: FahCore_a1.exe
[22:40:06] Downloading core (/~pande/Win32/x86_Deino/Core_a1.fah from www.stanford.edu)
[22:40:07] Initial: AFDE; + 10240 bytes downloaded
[22:40:07] Initial: 10F0; + 20480 bytes downloaded
[22:40:07] Initial: DB70; + 30720 bytes downloaded
[22:40:07] Initial: 865E; + 40960 bytes downloaded
[22:40:07] Initial: 8F87; + 51200 bytes downloaded
[22:40:07] Initial: C48B; + 61440 bytes downloaded
[22:40:07] Initial: 92B3; + 71680 bytes downloaded
[22:40:07] Initial: C102; + 81920 bytes downloaded
[22:40:08] Initial: 1996; + 92160 bytes downloaded
[22:40:08] Initial: BFFE; + 102400 bytes downloaded
[22:40:08] Initial: 1810; + 112640 bytes downloaded
[22:40:08] Initial: 0626; + 122880 bytes downloaded
[22:40:08] Initial: 7B53; + 133120 bytes downloaded
[22:40:08] Initial: 0441; + 143360 bytes downloaded
[22:40:08] Initial: FECE; + 153600 bytes downloaded
[22:40:08] Initial: D346; + 163840 bytes downloaded
[22:40:08] Initial: 2DE8; + 174080 bytes downloaded
[22:40:08] Initial: B3F0; + 184320 bytes downloaded
[22:40:08] Initial: 2881; + 194560 bytes downloaded
[22:40:08] Initial: 9507; + 204800 bytes downloaded
[22:40:08] Initial: 1BAF; + 215040 bytes downloaded
[22:40:08] Initial: 717C; + 225280 bytes downloaded
[22:40:08] Initial: 23FD; + 235520 bytes downloaded
[22:40:08] Initial: 915F; + 245760 bytes downloaded
[22:40:08] Initial: CE52; + 256000 bytes downloaded
[22:40:08] Initial: ED88; + 266240 bytes downloaded
[22:40:08] Initial: 2579; + 276480 bytes downloaded
[22:40:08] Initial: 3396; + 286720 bytes downloaded
[22:40:08] Initial: 410C; + 296960 bytes downloaded
[22:40:08] Initial: 56D1; + 307200 bytes downloaded
[22:40:08] Initial: 1EBD; + 317440 bytes downloaded
[22:40:08] Initial: 6AD9; + 327680 bytes downloaded
[22:40:08] Initial: F931; + 337920 bytes downloaded
[22:40:08] Initial: 1C40; + 348160 bytes downloaded
[22:40:08] Initial: C4AE; + 358400 bytes downloaded
[22:40:08] Initial: 57E4; + 368640 bytes downloaded
[22:40:08] Initial: 1843; + 378880 bytes downloaded
[22:40:08] Initial: B0C0; + 389120 bytes downloaded
[22:40:08] Initial: AAAA; + 399360 bytes downloaded
[22:40:08] Initial: D737; + 409600 bytes downloaded
[22:40:08] Initial: 762A; + 419840 bytes downloaded
[22:40:08] Initial: 8685; + 430080 bytes downloaded
[22:40:08] Initial: 25B1; + 440320 bytes downloaded
[22:40:08] Initial: 44F1; + 450560 bytes downloaded
[22:40:08] Initial: EF81; + 460800 bytes downloaded
[22:40:08] Initial: 900E; + 471040 bytes downloaded
[22:40:08] Initial: 906E; + 481280 bytes downloaded
[22:40:08] Initial: D59F; + 491520 bytes downloaded
[22:40:08] Initial: 2406; + 501760 bytes downloaded
[22:40:08] Initial: 9777; + 512000 bytes downloaded
[22:40:08] Initial: 7783; + 522240 bytes downloaded
[22:40:08] Initial: AEC5; + 532480 bytes downloaded
[22:40:08] Initial: B8A1; + 542720 bytes downloaded
[22:40:08] Initial: D50E; + 552960 bytes downloaded
[22:40:08] Initial: BDEE; + 563200 bytes downloaded
[22:40:08] Initial: E433; + 573440 bytes downloaded
[22:40:08] Initial: 667A; + 583680 bytes downloaded
[22:40:08] Initial: C413; + 593920 bytes downloaded
[22:40:08] Initial: DB64; + 604160 bytes downloaded
[22:40:08] Initial: 313C; + 614400 bytes downloaded
[22:40:08] Initial: 4B8A; + 624640 bytes downloaded
[22:40:08] Initial: 1B3A; + 634880 bytes downloaded
[22:40:08] Initial: E39B; + 645120 bytes downloaded
[22:40:08] Initial: F9FD; + 655360 bytes downloaded
[22:40:08] Initial: BFF6; + 665600 bytes downloaded
[22:40:08] Initial: 0552; + 675840 bytes downloaded
[22:40:08] Initial: 14A7; + 686080 bytes downloaded
[22:40:09] Initial: 99A6; + 696320 bytes downloaded
[22:40:09] Initial: 06B2; + 706560 bytes downloaded
[22:40:09] Initial: 445D; + 716800 bytes downloaded
[22:40:09] Initial: 62C1; + 727040 bytes downloaded
[22:40:09] Initial: 0E27; + 737280 bytes downloaded
[22:40:09] Initial: EF9A; + 747520 bytes downloaded
[22:40:09] Initial: C105; + 757760 bytes downloaded
[22:40:09] Initial: 46D3; + 768000 bytes downloaded
[22:40:09] Initial: 33C7; + 778240 bytes downloaded
[22:40:09] Initial: 7E92; + 788480 bytes downloaded
[22:40:09] Initial: 24B3; + 795847 bytes downloaded
[22:40:09] Verifying core Core_a1.fah...
[22:40:09] Signature is VALID
[22:40:09]
[22:40:09] Trying to unzip core FahCore_a1.exe
[22:40:09] Decompressed FahCore_a1.exe (2117632 bytes) successfully
[22:40:09] + Core successfully engaged
[22:40:14]
[22:40:14] + Processing work unit
[22:40:14] Core required: FahCore_a1.exe
[22:40:14] Core found.
[22:40:14] Working on Unit 00 [April 28 22:40:14]
[22:40:14] + Working ...
[22:40:14] - Calling 'mpiexec -channel shm -env MPICH_USE_SMP_OPTIMIZATIONS 1 -np 4 FahCore_a1.exe -dir work/ -suffix 00 -checkpoint 15 -verbose -lifeline 3664 -version 592'
[22:40:14]
[22:40:14] *------------------------------*
[22:40:14] Folding@Home Gromacs SMP Core
[22:40:14] Version 1.76 (February 23, 2008)
[22:40:14]
[22:40:14] Preparing to commence simulation
[22:40:14] - Looking at optimizations...
[22:40:14] - Failed to delete work/wudata_00.sas
[22:40:14] Warning: c- Created dyn
[22:40:14] - Files status OK
[22:40:14]
[22:40:14] Folding@home Core Shutdown: MISSING_WORK_FILES
[22:40:14] Final Fing output
[22:40:14] OK
[22:42:14] inalizing output
[22:42:14] e Shutdown: MISSING_WORK_FILES
[22:42:14] Finalizing output
[22:42:18] CoreStatus = 1 (1)
[22:42:18] Client-core communications error: ERROR 0x1
[22:42:18] Deleting current work unit & continuing...
[22:44:38] - Warning: Could not delete all work unit files (0): Core returned invalid code
[22:44:38] Trying to send all finished work units
[22:44:38] + No unsent completed units remaining.
[22:44:38] - Preparing to get new work unit...
[22:44:38] + Attempting to get work packet
[22:44:38] - Will indicate memory of 2046 MB
[22:44:38] - Connecting to assignment server
[22:44:38] Connecting to http://assign.stanford.edu:8080/
[22:44:39] Posted data.
[22:44:39] Initial: 40AB; - Successful: assigned to (171.64.65.63).
[22:44:39] + News From Folding@Home: Welcome to Folding@Home
[22:44:39] Loaded queue successfully.
[22:44:39] Connecting to http://171.64.65.63:8080/
[22:44:40] Posted data.
[22:44:40] Initial: 0000; - Receiving payload (expected size: 608437)
[22:44:42] - Downloaded at ~297 kB/s
[22:44:42] - Averaged speed for that direction ~365 kB/s
[22:44:42] + Received work.
[22:44:42] + Closed connections
[22:44:47]
[22:44:47] + Processing work unit
[22:44:47] Core required: FahCore_a1.exe
[22:44:47] Core found.
[22:44:47] Working on Unit 01 [April 28 22:44:47]
[22:44:47] + Working ...
[22:44:47] - Calling 'mpiexec -channel shm -env MPICH_USE_SMP_OPTIMIZATIONS 1 -np 4 FahCore_a1.exe -dir work/ -suffix 01 -checkpoint 15 -verbose -lifeline 3664 -version 592'
[22:44:47]
[22:44:47] *------------------------------*
[22:44:47] Folding@Home Gromacs SMP Core
[22:44:47] Version 1.76 (February 23, 2008)
[22:44:47]
[22:44:47] Preparing to commence simulation
[22:44:47] - Ensuring status. Please wait.
[22:45:04] - Looking at optimizations...
[22:45:04] - Working with standard loops on this execution.
[22:45:04] - Created dyn
[22:45:04] - Files status OK
[22:45:05] - Expanded 607925 -> 3255941 (decompressed 535.5 percent)
[22:45:05] - Starting from initial work packet
[22:45:05]
[22:45:05] Project: 3064 (Run 0, Clone 161, Gen 4)
[22:45:05]
[22:45:05] Entering M.D.
[22:45:11] Protein: p3064_lambda5_2003
[22:45:11] Writing local files
[22:45:11] Extra SSE boost OK.
[22:45:11]
[22:45:11] Extra SSE boost OK.
[22:45:11] Writing local files
[22:45:11] Completed 0 out of 5000000 steps (0 percent)
[22:55:15] Writing local files
[22:55:15] Completed 50000 out of 5000000 steps (1 percent)
[23:05:20] Writing local files
[23:05:20] Completed 100000 out of 5000000 steps (2 percent)