Project 2686 (R9,C16,G115)

Moderators: Site Moderators, FAHC Science Team

Post Reply
AK419
Posts: 7
Joined: Fri Mar 19, 2010 3:24 pm

Project 2686 (R9,C16,G115)

Post by AK419 »

Not sure if this is a bad WU or not, but it will not start on my computer. Here is the log for it:

Code: Select all

[17:20:46] Project: 2686 (Run 9, Clone 16, Gen 115)
[17:20:46] 
[17:20:46] Assembly optimizations on if available.
[17:20:46] Entering M.D.
[17:20:52] Mapping NT from 8 to 8 
[17:20:54] Completed 0 out of 250000 steps  (0%)
[23:12:18] - Autosending finished units... [July 11 23:12:18 UTC]
[23:12:18] Trying to send all finished work units
[23:12:18] + No unsent completed units remaining.
[23:12:18] - Autosend completed
The computer in question have just completed another 2686 WU before this one. Try to restart the WU in question a couple of time after noticing the issue, but it just refuse to start.
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Project 2686 (R9,C16,G115)

Post by PantherX »

A bad WU for many donors:
The WU (P2686,R9,C16,G115) has been reported as a bad WU.
Thanks for your report.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
GreyWhiskers
Posts: 660
Joined: Mon Oct 25, 2010 5:57 am
Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 [email protected] GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers

b) 2004 HP a475c desktop, 1 core Pent 4 [email protected] GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only

c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß
Location: Saratoga, California USA

Re: Project 2686 (R9,C16,G115)

Post by GreyWhiskers »

Funny - I was just run over by this exact same WU this morning - where it blew through 6 rapid attempts on this WU. Twice, the client re-downloaded core a5.

I thought that the issue was that I had left -SMP 7 on. When I woke up this morning and saw that the v6 client was still trying to get a new WU from the server, I CTRL-C'ed the client, reprogrammed for -SMP 8. Immediately after starting the client, Project: 6900 (Run 37, Clone 2, Gen 17) was assigned - it's now 23% completed.

I see that AK419 got his results a few hours later (1720 GMT) - with 8 cores enabled.

We can't see from AK419's post just what happened - whether he/she got the error C0000005 as I did.

Well, anyway, i've left the -SMP 8 on, and upped the OC a blt - I'm getting OK TPFs on it - not ideal, but stably OK.

[14:04:21] Project: 2686 (Run 9, Clone 16, Gen 115)

[14:04:27] Mapping NT from 7 to 7
[14:04:29] Completed 0 out of 250000 steps (0%)
[14:04:39] CoreStatus = C0000005 (-1073741819) <---Note 10 Seconds
[14:04:39] Client-core communications error: ERROR 0xc0000005
[14:04:39] Deleting current work unit & continuing...

[14:05:55] Mapping NT from 7 to 7
[14:05:58] Completed 0 out of 250000 steps (0%)
[14:06:07] CoreStatus = C0000029 (-1073741783) <---Note 9 Seconds
[14:06:07] Client-core communications error: ERROR 0xc0000029
[14:06:07] Deleting current work unit & continuing...

[14:07:24] Completed 0 out of 250000 steps (0%)
[14:07:31] CoreStatus = C0000029 (-1073741783) <---Note 7 Seconds
[14:07:31] Client-core communications error: ERROR 0xc0000029
[14:07:31] - Attempting to download new core... <---Note change in strategy - reload core a5
[14:07:31] + Downloading new core: FahCore_a5.exe

[14:10:32] Completed 0 out of 250000 steps (0%)
[14:10:43] CoreStatus = C0000029 (-1073741783) <---Note 11 Seconds
[14:10:43] Client-core communications error: ERROR 0xc0000029
[14:10:43] Deleting current work unit & continuing...

[14:11:59] Completed 0 out of 250000 steps (0%)
[14:12:06] CoreStatus = C0000029 (-1073741783) <---Note 7 Seconds
[14:12:06] Client-core communications error: ERROR 0xc0000029
[14:12:06] Deleting current work unit & continuing...

[14:13:23] Completed 0 out of 250000 steps (0%)
[14:13:30] CoreStatus = C0000029 (-1073741783)
[14:13:30] Client-core communications error: ERROR 0xc0000029
[14:13:30] - Attempting to download new core... <---Note change in strategy - reload core a5 AGAIN
[14:13:30] + Downloading new core: FahCore_a5.exe


Code: Select all

--- Opening Log file [July 9 11:35:49 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Public\Documents\FAH SMP Client
Executable: C:\Users\Public\Documents\FAH SMP Client\FAH6-SMP.exe
Arguments: -smp 7 -bigadv -verbosity 9 

[11:35:49] - Ask before connecting: No
[11:35:49] - User name: GreyWhiskers (Team 0)
[11:35:49] - User ID: 51EA5C9A7EF9D58E
[11:35:49] - Machine ID: 2
[11:35:49] 
[11:35:49] Loaded queue successfully.
[11:35:49] 
[11:35:49] - Autosending finished units... [July 9 11:35:49 UTC]
[11:35:49] + Processing work unit
[11:35:49] Trying to send all finished work units
[11:35:49] Core required: FahCore_a5.exe
[11:35:49] + No unsent completed units remaining.
[11:35:49] Core found.
[11:35:49] - Autosend completed
[11:35:49] Working on queue slot 06 [July 9 11:35:49 UTC]
[11:35:49] + Working ...
[11:35:49] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 06 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[11:35:50] 
[11:35:50] *------------------------------*
[11:35:50] Folding@Home Gromacs SMP Core
[11:35:50] Version 2.27 (Mar 12, 2010)
[11:35:50] 
[11:35:50] Preparing to commence simulation
[11:35:50] - Ensuring status. Please wait.
[11:35:59] - Looking at optimizations...
[11:35:59] - Working with standard loops on this execution.
[11:35:59] - Previous termination of core was improper.
[11:35:59] - Going to use standard loops.
[11:35:59] - Files status OK
[11:36:03] - Expanded 24868634 -> 30796292 (decompressed 123.8 percent)
[11:36:03] Called DecompressByteArray: compressed_data_size=24868634 data_size=30796292, decompressed_data_size=30796292 diff=0
[11:36:03] - Digital signature verified
[11:36:03] 
[11:36:03] Project: 6900 (Run 37, Clone 2, Gen 16)
[11:36:03] 
[11:36:05] Entering M.D.
[11:36:11] Using Gromacs checkpoints
[11:36:12] Mapping NT from 7 to 7 
[11:36:16] Resuming from checkpoint
[11:36:16] Verified work/wudata_06.log
[11:36:17] Verified work/wudata_06.trr
[11:36:17] Verified work/wudata_06.xtc
[11:36:17] Verified work/wudata_06.edr
[11:36:18] Completed 17100 out of 250000 steps  (6%)

SNIP

[13:23:00] Completed 247500 out of 250000 steps  (99%)
[13:55:09] Completed 250000 out of 250000 steps  (100%)
[13:55:21] DynamicWrapper: Finished Work Unit: sleep=10000
[13:55:31] 
[13:55:31] Finished Work Unit:
[13:55:31] - Reading up to 52713120 from "work/wudata_06.trr": Read 52713120
[13:55:32] trr file hash check passed.
[13:55:32] - Reading up to 47143928 from "work/wudata_06.xtc": Read 47143928
[13:55:34] xtc file hash check passed.
[13:55:34] edr file hash check passed.
[13:55:34] logfile size: 204440
[13:55:34] Leaving Run
[13:55:35] - Writing 100229428 bytes of core data to disk...
[13:55:37]   ... Done.
[13:56:57] - Shutting down core
[13:56:57] 
[13:56:57] Folding@home Core Shutdown: FINISHED_UNIT
[13:57:19] CoreStatus = 64 (100)
[13:57:19] Unit 6 finished with 61 percent of time to deadline remaining.
[13:57:19] Updated performance fraction: 0.637133
[13:57:19] Sending work to server
[13:57:19] Project: 6900 (Run 37, Clone 2, Gen 16)


[13:57:19] + Attempting to send results [July 11 13:57:19 UTC]
[13:57:19] - Reading file work/wuresults_06.dat from core
[13:57:19]   (Read 100229428 bytes from disk)
[13:57:19] Connecting to http://130.237.232.141:8080/
[14:03:25] Posted data.
[14:03:25] Initial: 0000; - Uploaded at ~267 kB/s
[14:03:25] - Averaged speed for that direction ~269 kB/s
[14:03:25] + Results successfully sent
[14:03:25] Thank you for your contribution to Folding@Home.
[14:03:25] + Number of Units Completed: 60

[14:03:37] Trying to send all finished work units
[14:03:37] + No unsent completed units remaining.
[14:03:37] - Preparing to get new work unit...
[14:03:37] Cleaning up work directory
[14:03:57] + Attempting to get work packet
[14:03:57] Passkey found
[14:03:57] - Will indicate memory of 12268 MB
[14:03:57] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[14:03:57] - Connecting to assignment server
[14:03:57] Connecting to http://assign.stanford.edu:8080/
[14:03:57] Posted data.
[14:03:57] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:03:57] + News From Folding@Home: Welcome to Folding@Home
[14:03:57] Loaded queue successfully.
[14:03:57] Sent data
[14:03:57] Connecting to http://171.67.108.22:8080/
[14:04:06] Posted data.
[14:04:06] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:04:16] - Downloaded at ~2487 kB/s
[14:04:16] - Averaged speed for that direction ~777 kB/s
[14:04:16] + Received work.
[14:04:16] Trying to send all finished work units
[14:04:16] + No unsent completed units remaining.
[14:04:16] + Closed connections
[14:04:16] 
[14:04:16] + Processing work unit
[14:04:16] Core required: FahCore_a5.exe
[14:04:16] Core found.
[14:04:16] Working on queue slot 07 [July 11 14:04:16 UTC]
[14:04:16] + Working ...
[14:04:16] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 07 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:04:17] 
[14:04:17] *------------------------------*
[14:04:17] Folding@Home Gromacs SMP Core
[14:04:17] Version 2.27 (Mar 12, 2010)
[14:04:17] 
[14:04:17] Preparing to commence simulation
[14:04:17] - Looking at optimizations...
[14:04:17] - Created dyn
[14:04:17] - Files status OK
[14:04:21] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:04:21] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:04:21] - Digital signature verified
[14:04:21] 
[14:04:21] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:04:21] 
[14:04:21] Assembly optimizations on if available.
[14:04:21] Entering M.D.
[14:04:27] Mapping NT from 7 to 7 
[14:04:29] Completed 0 out of 250000 steps  (0%)
[14:04:39] CoreStatus = C0000005 (-1073741819)
[14:04:39] Client-core communications error: ERROR 0xc0000005
[14:04:39] Deleting current work unit & continuing...
[14:04:57] Trying to send all finished work units
[14:04:57] + No unsent completed units remaining.
[14:04:57] - Preparing to get new work unit...
[14:04:57] Cleaning up work directory
[14:05:17] + Attempting to get work packet
[14:05:17] Passkey found
[14:05:17] - Will indicate memory of 12268 MB
[14:05:17] - Connecting to assignment server
[14:05:17] Connecting to http://assign.stanford.edu:8080/
[14:05:17] Posted data.
[14:05:17] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:05:17] + News From Folding@Home: Welcome to Folding@Home
[14:05:17] Loaded queue successfully.
[14:05:17] Sent data
[14:05:17] Connecting to http://171.67.108.22:8080/
[14:05:26] Posted data.
[14:05:26] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:05:39] - Downloaded at ~1913 kB/s
[14:05:39] - Averaged speed for that direction ~1004 kB/s
[14:05:39] + Received work.
[14:05:39] + Closed connections
[14:05:44] 
[14:05:44] + Processing work unit
[14:05:44] Core required: FahCore_a5.exe
[14:05:44] Core found.
[14:05:44] Working on queue slot 08 [July 11 14:05:44 UTC]
[14:05:44] + Working ...
[14:05:44] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 08 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:05:44] 
[14:05:44] *------------------------------*
[14:05:44] Folding@Home Gromacs SMP Core
[14:05:44] Version 2.27 (Mar 12, 2010)
[14:05:44] 
[14:05:44] Preparing to commence simulation
[14:05:44] - Looking at optimizations...
[14:05:44] - Created dyn
[14:05:44] - Files status OK
[14:05:49] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:05:49] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:05:49] - Digital signature verified
[14:05:49] 
[14:05:49] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:05:49] 
[14:05:49] Assembly optimizations on if available.
[14:05:49] Entering M.D.
[14:05:55] Mapping NT from 7 to 7 
[14:05:58] Completed 0 out of 250000 steps  (0%)
[14:06:07] CoreStatus = C0000029 (-1073741783)
[14:06:07] Client-core communications error: ERROR 0xc0000029
[14:06:07] Deleting current work unit & continuing...
[14:06:25] Trying to send all finished work units
[14:06:25] + No unsent completed units remaining.
[14:06:25] - Preparing to get new work unit...
[14:06:25] Cleaning up work directory
[14:06:44] + Attempting to get work packet
[14:06:44] Passkey found
[14:06:44] - Will indicate memory of 12268 MB
[14:06:44] - Connecting to assignment server
[14:06:44] Connecting to http://assign.stanford.edu:8080/
[14:06:45] Posted data.
[14:06:45] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:06:45] + News From Folding@Home: Welcome to Folding@Home
[14:06:45] Loaded queue successfully.
[14:06:45] Sent data
[14:06:45] Connecting to http://171.67.108.22:8080/
[14:06:54] Posted data.
[14:06:54] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:07:05] - Downloaded at ~2261 kB/s
[14:07:05] - Averaged speed for that direction ~1256 kB/s
[14:07:05] + Received work.
[14:07:06] + Closed connections
[14:07:11] 
[14:07:11] + Processing work unit
[14:07:11] Core required: FahCore_a5.exe
[14:07:11] Core found.
[14:07:11] Working on queue slot 09 [July 11 14:07:11 UTC]
[14:07:11] + Working ...
[14:07:11] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 09 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:07:11] 
[14:07:11] *------------------------------*
[14:07:11] Folding@Home Gromacs SMP Core
[14:07:11] Version 2.27 (Mar 12, 2010)
[14:07:11] 
[14:07:11] Preparing to commence simulation
[14:07:11] - Looking at optimizations...
[14:07:11] - Created dyn
[14:07:11] - Files status OK
[14:07:15] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:07:15] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:07:15] - Digital signature verified
[14:07:15] 
[14:07:15] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:07:15] 
[14:07:15] Assembly optimizations on if available.
[14:07:15] Entering M.D.
[14:07:22] Mapping NT from 7 to 7 
[14:07:24] Completed 0 out of 250000 steps  (0%)
[14:07:31] CoreStatus = C0000029 (-1073741783)
[14:07:31] Client-core communications error: ERROR 0xc0000029
[14:07:31] - Attempting to download new core...
[14:07:31] + Downloading new core: FahCore_a5.exe
[14:07:31] Downloading core (/~pande/Win32/x86/Core_a5.fah from www.stanford.edu)
[14:07:31] Initial: AFDE; + 10240 bytes downloaded

big SNIP

[14:07:33] Initial: 2909; + 3266560 bytes downloaded
[14:07:33] Initial: BC0E; + 3270437 bytes downloaded
[14:07:33] Verifying core Core_a5.fah...
[14:07:33] Signature is VALID
[14:07:33] 
[14:07:33] Trying to unzip core FahCore_a5.exe
[14:07:33] Decompressed FahCore_a5.exe (9326080 bytes) successfully
[14:07:38] + Core successfully engaged
[14:07:39] Deleting current work unit & continuing...
[14:07:57] Trying to send all finished work units
[14:07:57] + No unsent completed units remaining.
[14:07:57] - Preparing to get new work unit...
[14:07:57] Cleaning up work directory
[14:08:17] + Attempting to get work packet
[14:08:17] Passkey found
[14:08:17] - Will indicate memory of 12268 MB
[14:08:17] - Connecting to assignment server
[14:08:17] Connecting to http://assign.stanford.edu:8080/
[14:08:17] Posted data.
[14:08:17] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:08:17] + News From Folding@Home: Welcome to Folding@Home
[14:08:17] Loaded queue successfully.
[14:08:17] Sent data
[14:08:17] Connecting to http://171.67.108.22:8080/
[14:08:18] Posted data.
[14:08:18] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:08:18] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[14:08:27] + Attempting to get work packet
[14:08:27] Passkey found
[14:08:27] - Will indicate memory of 12268 MB
[14:08:27] - Connecting to assignment server
[14:08:27] Connecting to http://assign.stanford.edu:8080/
[14:08:28] Posted data.
[14:08:28] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:08:28] + News From Folding@Home: Welcome to Folding@Home
[14:08:28] Loaded queue successfully.
[14:08:28] Sent data
[14:08:28] Connecting to http://171.67.108.22:8080/
[14:08:28] Posted data.
[14:08:28] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:08:28] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[14:08:44] + Attempting to get work packet
[14:08:44] Passkey found
[14:08:44] - Will indicate memory of 12268 MB
[14:08:44] - Connecting to assignment server
[14:08:44] Connecting to http://assign.stanford.edu:8080/
[14:08:44] Posted data.
[14:08:44] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:08:44] + News From Folding@Home: Welcome to Folding@Home
[14:08:45] Loaded queue successfully.
[14:08:45] Sent data
[14:08:45] Connecting to http://171.67.108.22:8080/
[14:08:45] Posted data.
[14:08:45] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:08:45] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[14:09:06] + Attempting to get work packet
[14:09:06] Passkey found
[14:09:06] - Will indicate memory of 12268 MB
[14:09:06] - Connecting to assignment server
[14:09:06] Connecting to http://assign.stanford.edu:8080/
[14:09:06] Posted data.
[14:09:06] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:09:06] + News From Folding@Home: Welcome to Folding@Home
[14:09:06] Loaded queue successfully.
[14:09:06] Sent data
[14:09:06] Connecting to http://171.67.108.22:8080/
[14:09:06] Posted data.
[14:09:06] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:09:07] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[14:09:53] + Attempting to get work packet
[14:09:53] Passkey found
[14:09:53] - Will indicate memory of 12268 MB
[14:09:53] - Connecting to assignment server
[14:09:53] Connecting to http://assign.stanford.edu:8080/
[14:09:54] Posted data.
[14:09:54] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:09:54] + News From Folding@Home: Welcome to Folding@Home
[14:09:54] Loaded queue successfully.
[14:09:54] Sent data
[14:09:54] Connecting to http://171.67.108.22:8080/
[14:10:03] Posted data.
[14:10:03] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:10:13] - Downloaded at ~2487 kB/s
[14:10:13] - Averaged speed for that direction ~1502 kB/s
[14:10:13] + Received work.
[14:10:13] + Closed connections
[14:10:18] 
[14:10:18] + Processing work unit
[14:10:18] Core required: FahCore_a5.exe
[14:10:18] Core found.
[14:10:18] Working on queue slot 00 [July 11 14:10:18 UTC]
[14:10:18] + Working ...
[14:10:18] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 00 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:10:18] 
[14:10:18] *------------------------------*
[14:10:18] Folding@Home Gromacs SMP Core
[14:10:18] Version 2.27 (Mar 12, 2010)
[14:10:18] 
[14:10:18] Preparing to commence simulation
[14:10:18] - Looking at optimizations...
[14:10:18] - Created dyn
[14:10:18] - Files status OK
[14:10:23] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:10:23] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:10:23] - Digital signature verified
[14:10:23] 
[14:10:23] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:10:23] 
[14:10:23] Assembly optimizations on if available.
[14:10:23] Entering M.D.
[14:10:29] Mapping NT from 7 to 7 
[14:10:32] Completed 0 out of 250000 steps  (0%)
[14:10:43] CoreStatus = C0000029 (-1073741783)
[14:10:43] Client-core communications error: ERROR 0xc0000029
[14:10:43] Deleting current work unit & continuing...
[14:11:01] Trying to send all finished work units
[14:11:01] + No unsent completed units remaining.
[14:11:01] - Preparing to get new work unit...
[14:11:01] Cleaning up work directory
[14:11:20] + Attempting to get work packet
[14:11:20] Passkey found
[14:11:20] - Will indicate memory of 12268 MB
[14:11:20] - Connecting to assignment server
[14:11:20] Connecting to http://assign.stanford.edu:8080/
[14:11:21] Posted data.
[14:11:21] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:11:21] + News From Folding@Home: Welcome to Folding@Home
[14:11:21] Loaded queue successfully.
[14:11:21] Sent data
[14:11:21] Connecting to http://171.67.108.22:8080/
[14:11:30] Posted data.
[14:11:30] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:11:40] - Downloaded at ~2487 kB/s
[14:11:40] - Averaged speed for that direction ~1699 kB/s
[14:11:40] + Received work.
[14:11:41] + Closed connections
[14:11:46] 
[14:11:46] + Processing work unit
[14:11:46] Core required: FahCore_a5.exe
[14:11:46] Core found.
[14:11:46] Working on queue slot 01 [July 11 14:11:46 UTC]
[14:11:46] + Working ...
[14:11:46] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:11:46] 
[14:11:46] *------------------------------*
[14:11:46] Folding@Home Gromacs SMP Core
[14:11:46] Version 2.27 (Mar 12, 2010)
[14:11:46] 
[14:11:46] Preparing to commence simulation
[14:11:46] - Looking at optimizations...
[14:11:46] - Created dyn
[14:11:46] - Files status OK
[14:11:50] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:11:50] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:11:50] - Digital signature verified
[14:11:50] 
[14:11:50] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:11:50] 
[14:11:50] Assembly optimizations on if available.
[14:11:50] Entering M.D.
[14:11:56] Mapping NT from 7 to 7 
[14:11:59] Completed 0 out of 250000 steps  (0%)
[14:12:06] CoreStatus = C0000029 (-1073741783)
[14:12:06] Client-core communications error: ERROR 0xc0000029
[14:12:06] Deleting current work unit & continuing...
[14:12:24] Trying to send all finished work units
[14:12:24] + No unsent completed units remaining.
[14:12:24] - Preparing to get new work unit...
[14:12:24] Cleaning up work directory
[14:12:44] + Attempting to get work packet
[14:12:44] Passkey found
[14:12:44] - Will indicate memory of 12268 MB
[14:12:44] - Connecting to assignment server
[14:12:44] Connecting to http://assign.stanford.edu:8080/
[14:12:45] Posted data.
[14:12:45] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:12:45] + News From Folding@Home: Welcome to Folding@Home
[14:12:45] Loaded queue successfully.
[14:12:45] Sent data
[14:12:45] Connecting to http://171.67.108.22:8080/
[14:12:54] Posted data.
[14:12:54] Initial: 0000; - Receiving payload (expected size: 25476747)
[14:13:04] - Downloaded at ~2487 kB/s
[14:13:04] - Averaged speed for that direction ~1857 kB/s
[14:13:04] + Received work.
[14:13:04] + Closed connections
[14:13:09] 
[14:13:09] + Processing work unit
[14:13:09] Core required: FahCore_a5.exe
[14:13:09] Core found.
[14:13:09] Working on queue slot 02 [July 11 14:13:09 UTC]
[14:13:09] + Working ...
[14:13:09] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 7 -checkpoint 15 -verbose -lifeline 4284 -version 634'

[14:13:09] 
[14:13:09] *------------------------------*
[14:13:09] Folding@Home Gromacs SMP Core
[14:13:09] Version 2.27 (Mar 12, 2010)
[14:13:09] 
[14:13:09] Preparing to commence simulation
[14:13:09] - Looking at optimizations...
[14:13:09] - Created dyn
[14:13:09] - Files status OK
[14:13:13] - Expanded 25476235 -> 31941441 (decompressed 125.3 percent)
[14:13:13] Called DecompressByteArray: compressed_data_size=25476235 data_size=31941441, decompressed_data_size=31941441 diff=0
[14:13:13] - Digital signature verified
[14:13:13] 
[14:13:13] Project: 2686 (Run 9, Clone 16, Gen 115)
[14:13:13] 
[14:13:14] Assembly optimizations on if available.
[14:13:14] Entering M.D.
[14:13:20] Mapping NT from 7 to 7 
[14:13:23] Completed 0 out of 250000 steps  (0%)
[14:13:30] CoreStatus = C0000029 (-1073741783)
[14:13:30] Client-core communications error: ERROR 0xc0000029
[14:13:30] - Attempting to download new core...
[14:13:30] + Downloading new core: FahCore_a5.exe
[14:13:30] Downloading core (/~pande/Win32/x86/Core_a5.fah from www.stanford.edu)
[14:13:30] Initial: AFDE; + 10240 bytes downloaded
[14:13:30] Initial: F4F5; + 20480 bytes downloaded

big SNIP

[14:13:31] Initial: BC0E; + 3270437 bytes downloaded
[14:13:32] Verifying core Core_a5.fah...
[14:13:32] Signature is VALID
[14:13:32] 
[14:13:32] Trying to unzip core FahCore_a5.exe
[14:13:32] Decompressed FahCore_a5.exe (9326080 bytes) successfully
[14:13:37] + Core successfully engaged
[14:13:38] Deleting current work unit & continuing...
[14:13:56] Trying to send all finished work units
[14:13:56] + No unsent completed units remaining.
[14:13:56] - Preparing to get new work unit...
[14:13:56] Cleaning up work directory
[14:14:15] + Attempting to get work packet
[14:14:15] Passkey found
[14:14:15] - Will indicate memory of 12268 MB
[14:14:15] - Connecting to assignment server
[14:14:15] Connecting to http://assign.stanford.edu:8080/
[14:14:16] Posted data.
[14:14:16] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:14:16] + News From Folding@Home: Welcome to Folding@Home
[14:14:16] Loaded queue successfully.
[14:14:16] Sent data
[14:14:16] Connecting to http://171.67.108.22:8080/
[14:14:16] Posted data.
[14:14:16] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:14:16] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[14:14:34] + Attempting to get work packet
[14:14:34] Passkey found
[14:14:34] - Will indicate memory of 12268 MB
[14:14:34] - Connecting to assignment server
[14:14:34] Connecting to http://assign.stanford.edu:8080/
[14:14:37] Posted data.
[14:14:37] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:14:37] + News From Folding@Home: Welcome to Folding@Home
[14:14:37] Loaded queue successfully.
[14:14:37] Sent data
[14:14:37] Connecting to http://171.67.108.22:8080/
[14:14:37] Posted data.
[14:14:37] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:14:37] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[14:14:53] + Attempting to get work packet
[14:14:53] Passkey found
[14:14:53] - Will indicate memory of 12268 MB
[14:14:53] - Connecting to assignment server
[14:14:53] Connecting to http://assign.stanford.edu:8080/
[14:14:53] Posted data.
[14:14:53] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:14:53] + News From Folding@Home: Welcome to Folding@Home
[14:14:53] Loaded queue successfully.
[14:14:53] Sent data
[14:14:53] Connecting to http://171.67.108.22:8080/
[14:14:54] Posted data.
[14:14:54] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:14:54] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[14:15:28] + Attempting to get work packet
[14:15:28] Passkey found
[14:15:28] - Will indicate memory of 12268 MB
[14:15:28] - Connecting to assignment server
[14:15:28] Connecting to http://assign.stanford.edu:8080/
[14:15:29] Posted data.
[14:15:29] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:15:29] + News From Folding@Home: Welcome to Folding@Home
[14:15:29] Loaded queue successfully.
[14:15:29] Sent data
[14:15:29] Connecting to http://171.67.108.22:8080/
[14:15:29] Posted data.
[14:15:29] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:15:29] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[14:16:17] + Attempting to get work packet
[14:16:17] Passkey found
[14:16:17] - Will indicate memory of 12268 MB
[14:16:17] - Connecting to assignment server
[14:16:17] Connecting to http://assign.stanford.edu:8080/
[14:16:17] Posted data.
[14:16:17] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:16:17] + News From Folding@Home: Welcome to Folding@Home
[14:16:17] Loaded queue successfully.
[14:16:17] Sent data
[14:16:17] Connecting to http://171.67.108.22:8080/
[14:16:17] Posted data.
[14:16:17] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:16:18] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[14:17:50] + Attempting to get work packet
[14:17:50] Passkey found
[14:17:50] - Will indicate memory of 12268 MB
[14:17:50] - Connecting to assignment server
[14:17:50] Connecting to http://assign.stanford.edu:8080/
[14:17:51] Posted data.
[14:17:51] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:17:51] + News From Folding@Home: Welcome to Folding@Home
[14:17:51] Loaded queue successfully.
[14:17:51] Sent data
[14:17:51] Connecting to http://171.67.108.22:8080/
[14:17:51] Posted data.
[14:17:51] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:17:51] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[14:20:35] + Attempting to get work packet
[14:20:35] Passkey found
[14:20:35] - Will indicate memory of 12268 MB
[14:20:35] - Connecting to assignment server
[14:20:35] Connecting to http://assign.stanford.edu:8080/
[14:20:35] Posted data.
[14:20:35] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:20:35] + News From Folding@Home: Welcome to Folding@Home
[14:20:36] Loaded queue successfully.
[14:20:36] Sent data
[14:20:36] Connecting to http://171.67.108.22:8080/
[14:20:36] Posted data.
[14:20:36] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:20:36] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[14:26:10] + Attempting to get work packet
[14:26:10] Passkey found
[14:26:10] - Will indicate memory of 12268 MB
[14:26:10] - Connecting to assignment server
[14:26:10] Connecting to http://assign.stanford.edu:8080/
[14:26:11] Posted data.
[14:26:11] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:26:11] + News From Folding@Home: Welcome to Folding@Home
[14:26:11] Loaded queue successfully.
[14:26:11] Sent data
[14:26:11] Connecting to http://171.67.108.22:8080/
[14:26:11] Posted data.
[14:26:11] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:26:12] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.
[14:37:04] + Attempting to get work packet
[14:37:04] Passkey found
[14:37:04] - Will indicate memory of 12268 MB
[14:37:04] - Connecting to assignment server
[14:37:04] Connecting to http://assign.stanford.edu:8080/
[14:37:04] Posted data.
[14:37:04] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[14:37:04] + News From Folding@Home: Welcome to Folding@Home
[14:37:04] Loaded queue successfully.
[14:37:04] Sent data
[14:37:04] Connecting to http://171.67.108.22:8080/
[14:37:05] Posted data.
[14:37:05] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:37:05] - Attempt #9  to get work failed, and no other work to do.
Waiting before retry.
[14:44:45] Killing all core threads
[14:44:45] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[14:44:45] ***** Got a SIGTERM signal (2)
[14:44:45] Killing all core threads
[14:44:45] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.
AK419
Posts: 7
Joined: Fri Mar 19, 2010 3:24 pm

Re: Project 2686 (R9,C16,G115)

Post by AK419 »

Not sure why, but some of the errors shown in my terminal is not listed in the log. On the two restarts, it error out right after 0%. I manage to do a partial screen capture for one of those, and some of the "information" I got right after 0% are:
step 28750003: Water molecule starting at atom 1071459 can not be settled.
Check for bad contacts and/or reduce the timestep if appropriate.
And then something about Fatal error, Register dump with a few hex numbers, stack dump with more hex numbers ...etc. However, I did NOT notice the C0000005 error, nor did the client try to download a new core.
Post Reply