I intend to run the machine 24/7 to fold, currently it is running an SMP client [probably not set up properly] and a GPU client [which seems to be pumping out the units quite well].
I need a little help optimising my clients, I ran the CPU-Z and it shows:
Processor - Intel Core i7 740QM (4 core, 8 threads)
4096MB DDR3 Dual Channel Memory
NVIDIA GeForce GT 425M (1120 shaders, 1024 MB Memory)
Is my computer capable of effectively running the SMP client or should I stick with a few uniprocessor clients, also what would be the best way of configuring my clients considering I want to run it 24/7
Below are some snippets of the CPU-Z log, cheers for all your help
Code: Select all
CPU-Z TXT Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
CPU-Z version 1.57
Processors
-------------------------------------------------------------------------
Number of processors 1
Number of threads 8
APICs
-------------------------------------------------------------------------
Processor 0
-- Core 0
-- Thread 0 0
-- Thread 1 1
-- Core 1
-- Thread 0 2
-- Thread 1 3
-- Core 2
-- Thread 0 4
-- Thread 1 5
-- Core 3
-- Thread 0 6
-- Thread 1 7
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 8 (max 16)
Name Intel Core i7 740QM
Codename Clarksfield
Specification Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz
Package (platform ID) Socket 989 rPGA (0x4)
CPUID 6.E.5
Extended CPUID 6.1E
Core Stepping B1
Technology 45 nm
TDP Limit 45 Watts
Core Speed 931.0 MHz
Multiplier x FSB 7.0 x 133.0 MHz
Rated Bus speed 2128.1 MHz
Stock frequency 1733 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 4-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 6 MBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
Turbo Mode supported, enabled
Max turbo frequency 2933 MHz
Max non-turbo ratio 13x
Max turbo ratio 22x
Max efficiency ratio 7x
TDC Limit 37 Amps
Core TDP 37 Watts
Uncore TDP 8 Watts
Power @ 7x 13 Watts
Power @ 8x 16 Watts
Power @ 9x 20 Watts
Power @ 10x 24 Watts
Power @ 11x 30 Watts
Power @ 12x 37 Watts
Power @ 13x 45 Watts
Max bus number 255
Attached device PCI device at bus 255, device 2, function 1
Attached device PCI device at bus 255, device 3, function 4
Attached device PCI device at bus 255, device 2, function 1
Chipset
-------------------------------------------------------------------------
Northbridge Intel DMI Host Bridge rev. 11
Southbridge Intel HM55 rev. 06
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR3
Memory Size 4096 MBytes
Channels Dual
Memory Frequency 665.0 MHz (2:10)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Row Refresh Cycle Time (tRFC) 74
Command Rate (CR) 1T
Uncore Frequency 1995.0 MHz
Memory SPD
-------------------------------------------------------------------------
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format SO-DIMM
Manufacturer (ID) Elpida (7F7FFE0000000000)
Size 2048 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number EBJ21UE8BDS0-DJ-F
Serial number 8A9608E1
Manufacturing date Week 31/Year 10
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 7.0-7-7-20-27 @ 533 MHz
JEDEC #4 8.0-8-8-22-30 @ 609 MHz
JEDEC #5 9.0-9-9-25-34 @ 685 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format SO-DIMM
Manufacturer (ID) Elpida (7F7FFE0000000000)
Size 2048 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number EBJ21UE8BDS0-DJ-F
Serial number 859608DF
Manufacturing date Week 31/Year 10
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 7.0-7-7-20-27 @ 533 MHz
JEDEC #4 8.0-8-8-22-30 @ 609 MHz
JEDEC #5 9.0-9-9-25-34 @ 685 MHz
Graphics
-------------------------------------------------------------------------
Number of adapters 1
Graphic APIs
-------------------------------------------------------------------------
API NVIDIA I/O
API NVIDIA NVAPI
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Name NVIDIA GeForce GT 425M
Revision A1
Memory size 1024 MB
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1043)
Model ID 0x0DF0 (0x1522)
Performance Level Default
Core clock 50.5 MHz
Shader clock 101.0 MHz
Memory clock 135.0 MHz
Performance Level 2D Desktop
Core clock 202.5 MHz
Shader clock 405.0 MHz
Memory clock 324.0 MHz
Performance Level 3D Applications
Core clock 560.0 MHz
Shader clock 1120.0 MHz
Memory clock 800.0 MHz
Software
-------------------------------------------------------------------------
Windows Version Microsoft Windows 7 (6.1) Home Premium Edition (Build 7600)
DirectX Version 11.0