130.237.232.141 (P6900 unable to upload)

Moderators: Site Moderators, FAHC Science Team

k1wi
Posts: 909
Joined: Tue Sep 22, 2009 10:48 pm

Re: P6900 unable to upload

Post by k1wi »

I don't think you can yet conclude that. Rather, at this stage, that client has been unable to upload your most recent work unit, which is a P6900 unit. It may be coincidental that it stopped being unable to send back results with that work unit, or it may be that that particular connection between your computer and that server has an issue that completing said work unit has identified. That said it is curious that other clients on your machine have been returned.

At this stage, as 7im said, the server seems to be operating, and I can verify that I have completed and uploaded a P6900 work unit. So it appears to be something specific to either the client or the connection between you and that server that only appears when your client tries to return the work unit. I note that that server is based in Sweden.

Have you tried doing a tracert to the server? (In case you don't know how) in command prompt: tracert 130.237.232.141
Image
Howdy2u2
Posts: 9
Joined: Tue Sep 21, 2010 9:08 pm

Re: P6900 unable to upload

Post by Howdy2u2 »

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\>tracert 130.237.232.141

Tracing route to folding-4.pdc.kth.se [130.237.232.141]
over a maximum of 30 hops:

1 3 ms 1 ms <1 ms 192.168.1.1
2 9 ms 10 ms 11 ms 10.26.252.1
3 12 ms 27 ms 12 ms 172.30.8.177
4 22 ms 12 ms 12 ms 172.30.9.165
5 11 ms 13 ms 12 ms 172.30.9.170
6 17 ms 17 ms 22 ms 12.116.225.205
7 20 ms 19 ms 18 ms cr84.cgcil.ip.att.net [12.122.132.162]
8 18 ms 19 ms 19 ms cr2.cgcil.ip.att.net [12.123.7.250]
9 17 ms 25 ms 18 ms ggr3.cgcil.ip.att.net [12.122.132.17]
10 21 ms 21 ms 18 ms 192.205.34.198
11 38 ms 40 ms 45 ms nyk-bb1-link.telia.net [80.91.246.167]
12 132 ms 190 ms 126 ms kbn-bb1-link.telia.net [80.91.254.88]
13 135 ms 136 ms 143 ms s-bb2-link.telia.net [80.91.246.108]
14 207 ms 138 ms 138 ms s-b3-link.telia.net [80.91.250.152]
15 136 ms 133 ms 172 ms nordunet-113055-s-b3.c.telia.net [213.248.97.18]

16 138 ms 143 ms 138 ms c1sth.sunet.se [109.105.102.10]
17 137 ms 134 ms 136 ms a1sth-kth.sunet.se [193.11.0.198]
18 135 ms 133 ms 143 ms pdc1-m1fre-g-p2p.gw.kth.se [130.237.0.3]
19 145 ms 136 ms 131 ms folding-4.pdc.kth.se [130.237.232.141]

Trace complete.

[/img]

This is not the 1st P6900 that hasnt uploaded, the first one I was told was corrupted in another FF thread. viewtopic.php?f=55&t=16871 The 2nd -5th one did not upload either, I let them run until the deadline passed with the endless loop of cannot connect to server.
k1wi
Posts: 909
Joined: Tue Sep 22, 2009 10:48 pm

Re: P6900 unable to upload

Post by k1wi »

Ah, it might take a Pande rep to look into this, as nothing seems to appear wrong from what we're looking at (unless you were to do a TCP stack dump or something.)

You're not running any proxies or HTTP tunnels or anything are you?
Image
Howdy2u2
Posts: 9
Joined: Tue Sep 21, 2010 9:08 pm

Re: P6900 unable to upload

Post by Howdy2u2 »

k1wi wrote:Ah, it might take a Pande rep to look into this, as nothing seems to appear wrong from what we're looking at (unless you were to do a TCP stack dump or something.)

You're not running any proxies or HTTP tunnels or anything are you?
Ill say no for the simple fact I have no clue what those are. :e?:
Howdy2u2
Posts: 9
Joined: Tue Sep 21, 2010 9:08 pm

Re: P6900 unable to upload

Post by Howdy2u2 »

Well I have figured out it is not a firewall or AV not allowing me to upload my results for the P6900 WUs. It has to be the amount of "hops" to the collection server. I finished a P2685 and it sent as soon as it finished. Anyone have any ideas now?

Code: Select all

# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9 

[00:41:10] - Ask before connecting: No
[00:41:10] - User name: Howdy2u2 (Team 111065)
[00:41:10] - User ID: ******************
[00:41:10] - Machine ID: 2
[00:41:10] 
[00:41:10] Loaded queue successfully.
[00:41:10] - Preparing to get new work unit...
[00:41:10] - Autosending finished units... [January 11 00:41:10 UTC]
[00:41:10] Cleaning up work directory
[00:41:10] Trying to send all finished work units
[00:41:10] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:41:10] + Attempting to get work packet
[00:41:10] Passkey found


[00:41:10] - Will indicate memory of 4087 MB
[00:41:10] + Attempting to send results [January 11 00:41:10 UTC]
[00:41:10] - Detect CPU.[00:41:10] - Reading file work/wuresults_01.dat from core
 Vendor: GenuineIntel, Family: 6, Model: 14, Stepping: 5
[00:41:10] - Connecting to assignment server
[00:41:10]   (Read 100183264 bytes from disk)
[00:41:10] Connecting to http://assign.stanford.edu:8080/
[00:41:10] Connecting to http://130.237.232.141:8080/
[00:41:11] Posted data.
[00:41:11] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[00:41:11] + News From Folding@Home: Welcome to Folding@Home
[00:41:11] Loaded queue successfully.
[00:41:11] Sent data
[00:41:11] Connecting to http://171.67.108.22:8080/
[00:41:20] Posted data.
[00:41:20] Initial: 0000; - Receiving payload (expected size: 26648730)
[00:44:06] - Downloaded at ~156 kB/s
[00:44:06] - Averaged speed for that direction ~198 kB/s
[00:44:06] + Received work.
[00:44:06] + Closed connections
[00:44:06] 
[00:44:06] + Processing work unit
[00:44:06] Core required: FahCore_a3.exe
[00:44:06] Core found.
[00:44:06] Working on queue slot 02 [January 11 00:44:06 UTC]
[00:44:06] + Working ...
[00:44:06] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 772 -version 630'

[00:44:06] 
[00:44:06] *------------------------------*
[00:44:06] Folding@Home Gromacs SMP Core
[00:44:06] Version 2.22 (Mar 12, 2010)
[00:44:06] 
[00:44:06] Preparing to commence simulation
[00:44:06] - Assembly optimizations manually forced on.
[00:44:06] - Not checking prior termination.
[00:44:12] - Expanded 26648218 -> 33000273 (decompressed 123.8 percent)
[00:44:12] Called DecompressByteArray: compressed_data_size=26648218 data_size=33000273, decompressed_data_size=33000273 diff=0
[00:44:12] - Digital signature verified
[00:44:12] 
[00:44:12] Project: 2685 (Run 3, Clone 0, Gen 47)
[00:44:12] 
[00:44:13] Assembly optimizations on if available.
[00:44:13] Entering M.D.
[00:44:23] Completed 0 out of 250000 steps  (0%)
[00:45:18] - Couldn't send HTTP request to server
[00:45:18] + Could not connect to Work Server (results)
[00:45:18]     (130.237.232.141:8080)
[00:45:18] + Retrying using alternative port
[00:45:18] Connecting to http://130.237.232.141:80/
[00:48:25] - Couldn't send HTTP request to server
[00:48:25] + Could not connect to Work Server (results)
[00:48:25]     (130.237.232.141:80)
[00:48:25] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:48:25] - 10 failed uploads of this unit.


[00:48:25] + Attempting to send results [January 11 00:48:25 UTC]
[00:48:25] - Reading file work/wuresults_01.dat from core
[00:48:25]   (Read 100183264 bytes from disk)
[00:48:25] Connecting to http://130.237.165.141:8080/
[00:48:25] - Couldn't send HTTP request to server
[00:48:25] + Could not connect to Work Server (results)
[00:48:25]     (130.237.165.141:8080)
[00:48:25] + Retrying using alternative port
[00:48:25] Connecting to http://130.237.165.141:80/
[00:48:26] - Couldn't send HTTP request to server
[00:48:26] + Could not connect to Work Server (results)
[00:48:26]     (130.237.165.141:80)
[00:48:26]   Could not transmit unit 01 to Collection server; keeping in queue.
[00:48:26] + Sent 0 of 1 completed units to the server
[00:48:26] - Autosend completed
[01:25:37] Completed 2500 out of 250000 steps  (1%)
[02:06:36] Completed 5000 out of 250000 steps  (2%)
[02:47:33] Completed 7500 out of 250000 steps  (3%)
[03:28:25] Completed 10000 out of 250000 steps  (4%)
[04:09:28] Completed 12500 out of 250000 steps  (5%)
[04:50:28] Completed 15000 out of 250000 steps  (6%)
[05:31:23] Completed 17500 out of 250000 steps  (7%)
[06:12:29] Completed 20000 out of 250000 steps  (8%)
[06:48:26] - Autosending finished units... [January 11 06:48:26 UTC]
[06:48:26] Trying to send all finished work units
[06:48:26] Project: 6900 (Run 10, Clone 20, Gen 15)


[06:48:26] + Attempting to send results [January 11 06:48:26 UTC]
[06:48:26] - Reading file work/wuresults_01.dat from core
[06:48:26]   (Read 100183264 bytes from disk)
[06:48:26] Connecting to http://130.237.232.141:8080/
[06:52:15] - Couldn't send HTTP request to server
[06:52:15] + Could not connect to Work Server (results)
[06:52:15]     (130.237.232.141:8080)
[06:52:15] + Retrying using alternative port
[06:52:15] Connecting to http://130.237.232.141:80/
[06:53:41] Completed 22500 out of 250000 steps  (9%)
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08]     (130.237.232.141:80)
[06:55:08] - Error: Could not transmit unit 01 (completed January 10) to work server.
[06:55:08] - 11 failed uploads of this unit.


[06:55:08] + Attempting to send results [January 11 06:55:08 UTC]
[06:55:08] - Reading file work/wuresults_01.dat from core
[06:55:08]   (Read 100183264 bytes from disk)
[06:55:08] Connecting to http://130.237.165.141:8080/
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08]     (130.237.165.141:8080)
[06:55:08] + Retrying using alternative port
[06:55:08] Connecting to http://130.237.165.141:80/
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08]     (130.237.165.141:80)
[06:55:08]   Could not transmit unit 01 to Collection server; keeping in queue.
[06:55:08] + Sent 0 of 1 completed units to the server
[06:55:08] - Autosend completed
[07:35:37] Completed 25000 out of 250000 steps  (10%)
[08:17:28] Completed 27500 out of 250000 steps  (11%)
[08:59:16] Completed 30000 out of 250000 steps  (12%)
[09:41:08] Completed 32500 out of 250000 steps  (13%)
[10:22:51] Completed 35000 out of 250000 steps  (14%)
[11:04:50] Completed 37500 out of 250000 steps  (15%)
[11:46:43] Completed 40000 out of 250000 steps  (16%)
[12:28:36] Completed 42500 out of 250000 steps  (17%)
[12:55:08] - Autosending finished units... [January 11 12:55:08 UTC]
[12:55:08] Trying to send all finished work units
[12:55:08] Project: 6900 (Run 10, Clone 20, Gen 15)


[12:55:08] + Attempting to send results [January 11 12:55:08 UTC]
[12:55:08] - Reading file work/wuresults_01.dat from core
[12:55:08]   (Read 100183264 bytes from disk)
[12:55:08] Connecting to http://130.237.232.141:8080/
[13:00:20] - Couldn't send HTTP request to server
[13:00:20] + Could not connect to Work Server (results)
[13:00:20]     (130.237.232.141:8080)
[13:00:20] + Retrying using alternative port
[13:00:20] Connecting to http://130.237.232.141:80/
[13:03:20] - Couldn't send HTTP request to server
[13:03:20] + Could not connect to Work Server (results)
[13:03:20]     (130.237.232.141:80)
[13:03:20] - Error: Could not transmit unit 01 (completed January 10) to work server.
[13:03:20] - 12 failed uploads of this unit.


[13:03:20] + Attempting to send results [January 11 13:03:20 UTC]
[13:03:20] - Reading file work/wuresults_01.dat from core
[13:03:20]   (Read 100183264 bytes from disk)
[13:03:20] Connecting to http://130.237.165.141:8080/
[13:03:20] - Couldn't send HTTP request to server
[13:03:20] + Could not connect to Work Server (results)
[13:03:20]     (130.237.165.141:8080)
[13:03:20] + Retrying using alternative port
[13:03:20] Connecting to http://130.237.165.141:80/
[13:03:21] - Couldn't send HTTP request to server
[13:03:21] + Could not connect to Work Server (results)
[13:03:21]     (130.237.165.141:80)
[13:03:21]   Could not transmit unit 01 to Collection server; keeping in queue.
[13:03:21] + Sent 0 of 1 completed units to the server
[13:03:21] - Autosend completed
[13:10:27] Completed 45000 out of 250000 steps  (18%)
[13:51:29] Completed 47500 out of 250000 steps  (19%)
[14:32:27] Completed 50000 out of 250000 steps  (20%)
[15:13:26] Completed 52500 out of 250000 steps  (21%)
[15:54:55] Completed 55000 out of 250000 steps  (22%)
[16:36:08] Completed 57500 out of 250000 steps  (23%)
[17:17:10] Completed 60000 out of 250000 steps  (24%)
[17:58:16] Completed 62500 out of 250000 steps  (25%)
[18:39:19] Completed 65000 out of 250000 steps  (26%)
[19:03:21] - Autosending finished units... [January 11 19:03:21 UTC]
[19:03:21] Trying to send all finished work units
[19:03:21] Project: 6900 (Run 10, Clone 20, Gen 15)


[19:03:21] + Attempting to send results [January 11 19:03:21 UTC]
[19:03:21] - Reading file work/wuresults_01.dat from core
[19:03:21]   (Read 100183264 bytes from disk)
[19:03:21] Connecting to http://130.237.232.141:8080/
[19:08:00] - Couldn't send HTTP request to server
[19:08:00] + Could not connect to Work Server (results)
[19:08:00]     (130.237.232.141:8080)
[19:08:00] + Retrying using alternative port
[19:08:00] Connecting to http://130.237.232.141:80/
[19:12:46] - Couldn't send HTTP request to server
[19:12:46] + Could not connect to Work Server (results)
[19:12:46]     (130.237.232.141:80)
[19:12:46] - Error: Could not transmit unit 01 (completed January 10) to work server.
[19:12:46] - 13 failed uploads of this unit.


[19:12:46] + Attempting to send results [January 11 19:12:46 UTC]
[19:12:46] - Reading file work/wuresults_01.dat from core
[19:12:46]   (Read 100183264 bytes from disk)
[19:12:46] Connecting to http://130.237.165.141:8080/
[19:12:46] - Couldn't send HTTP request to server
[19:12:46] + Could not connect to Work Server (results)
[19:12:46]     (130.237.165.141:8080)
[19:12:46] + Retrying using alternative port
[19:12:46] Connecting to http://130.237.165.141:80/
[19:12:46] - Couldn't send HTTP request to server
[19:12:46] + Could not connect to Work Server (results)
[19:12:46]     (130.237.165.141:80)
[19:12:46]   Could not transmit unit 01 to Collection server; keeping in queue.
[19:12:46] + Sent 0 of 1 completed units to the server
[19:12:46] - Autosend completed
[19:20:28] Completed 67500 out of 250000 steps  (27%)
[20:01:42] Completed 70000 out of 250000 steps  (28%)
[20:42:27] Completed 72500 out of 250000 steps  (29%)
[21:23:33] Completed 75000 out of 250000 steps  (30%)
[22:04:37] Completed 77500 out of 250000 steps  (31%)
[22:45:47] Completed 80000 out of 250000 steps  (32%)
[23:25:50] Completed 82500 out of 250000 steps  (33%)
[00:06:48] Completed 85000 out of 250000 steps  (34%)
[00:47:56] Completed 87500 out of 250000 steps  (35%)
[01:11:45] - Autosending finished units... [January 12 01:11:45 UTC]
[01:11:45] Trying to send all finished work units
[01:11:45] Project: 6900 (Run 10, Clone 20, Gen 15)


[01:11:45] + Attempting to send results [January 12 01:11:45 UTC]
[01:11:45] - Reading file work/wuresults_01.dat from core
[01:11:45]   (Read 100183264 bytes from disk)
[01:11:45] Connecting to http://130.237.232.141:8080/
[01:14:47] - Couldn't send HTTP request to server
[01:14:47] + Could not connect to Work Server (results)
[01:14:47]     (130.237.232.141:8080)
[01:14:47] + Retrying using alternative port
[01:14:47] Connecting to http://130.237.232.141:80/
[01:19:30] - Couldn't send HTTP request to server
[01:19:30] + Could not connect to Work Server (results)
[01:19:30]     (130.237.232.141:80)
[01:19:30] - Error: Could not transmit unit 01 (completed January 10) to work server.
[01:19:30] - 14 failed uploads of this unit.


[01:19:30] + Attempting to send results [January 12 01:19:30 UTC]
[01:19:30] - Reading file work/wuresults_01.dat from core
[01:19:30]   (Read 100183264 bytes from disk)
[01:19:30] Connecting to http://130.237.165.141:8080/
[01:19:30] - Couldn't send HTTP request to server
[01:19:30] + Could not connect to Work Server (results)
[01:19:30]     (130.237.165.141:8080)
[01:19:30] + Retrying using alternative port
[01:19:30] Connecting to http://130.237.165.141:80/
[01:19:30] - Couldn't send HTTP request to server
[01:19:30] + Could not connect to Work Server (results)
[01:19:30]     (130.237.165.141:80)
[01:19:30]   Could not transmit unit 01 to Collection server; keeping in queue.
[01:19:30] + Sent 0 of 1 completed units to the server
[01:19:30] - Autosend completed
[01:29:03] Completed 90000 out of 250000 steps  (36%)
[01:30:39] Killing all core threads
[01:30:39] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[01:30:39] ***** Got a SIGTERM signal (2)
[01:30:39] Killing all core threads
[01:30:39] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [January 12 01:30:47 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9 

[01:30:47] - Ask before connecting: No
[01:30:47] - User name: Howdy2u2 (Team 111065)
[01:30:47] - User ID: ********************
[01:30:47] - Machine ID: 2
[01:30:47] 
[01:30:47] Loaded queue successfully.
[01:30:47] 
[01:30:47] - Autosending finished units... [January 12 01:30:47 UTC]
[01:30:47] + Processing work unit
[01:30:47] Trying to send all finished work units
[01:30:47] Core required: FahCore_a3.exe
[01:30:47] Project: 6900 (Run 10, Clone 20, Gen 15)
[01:30:47] Core found.


[01:30:47] + Attempting to send results [January 12 01:30:47 UTC]
[01:30:47] - Reading file work/wuresults_01.dat from core
[01:30:47]   (Read 100183264 bytes from disk)
[01:30:47] Connecting to http://130.237.232.141:8080/
[01:30:48] Working on queue slot 02 [January 12 01:30:48 UTC]
[01:30:48] + Working ...
[01:30:48] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 484 -version 630'

[01:30:48] 
[01:30:48] *------------------------------*
[01:30:48] Folding@Home Gromacs SMP Core
[01:30:48] Version 2.22 (Mar 12, 2010)
[01:30:48] 
[01:30:48] Preparing to commence simulation
[01:30:48] - Ensuring status. Please wait.
[01:30:58] - Assembly optimizations manually forced on.
[01:30:58] - Not checking prior termination.
[01:31:03] - Expanded 26648218 -> 33000273 (decompressed 123.8 percent)
[01:31:03] Called DecompressByteArray: compressed_data_size=26648218 data_size=33000273, decompressed_data_size=33000273 diff=0
[01:31:03] - Digital signature verified
[01:31:03] 
[01:31:03] Project: 2685 (Run 3, Clone 0, Gen 47)
[01:31:03] 
[01:31:03] Assembly optimizations on if available.
[01:31:03] Entering M.D.
[01:31:09] Using Gromacs checkpoints
[01:31:15] Resuming from checkpoint
[01:31:16] Verified work/wudata_02.log
[01:31:16] Verified work/wudata_02.trr
[01:31:16] Verified work/wudata_02.xtc
[01:31:16] Verified work/wudata_02.edr
[01:31:17] Completed 90019 out of 250000 steps  (36%)
[01:36:28] - Couldn't send HTTP request to server
[01:36:28] + Could not connect to Work Server (results)
[01:36:28]     (130.237.232.141:8080)
[01:36:28] + Retrying using alternative port
[01:36:28] Connecting to http://130.237.232.141:80/
[01:45:30] - Couldn't send HTTP request to server
[01:45:30] + Could not connect to Work Server (results)
[01:45:30]     (130.237.232.141:80)
[01:45:30] - Error: Could not transmit unit 01 (completed January 10) to work server.
[01:45:30] - 15 failed uploads of this unit.


[01:45:30] + Attempting to send results [January 12 01:45:30 UTC]
[01:45:30] - Reading file work/wuresults_01.dat from core
[01:45:30]   (Read 100183264 bytes from disk)
[01:45:30] Connecting to http://130.237.165.141:8080/
[01:45:30] - Couldn't send HTTP request to server
[01:45:30] + Could not connect to Work Server (results)
[01:45:30]     (130.237.165.141:8080)
[01:45:30] + Retrying using alternative port
[01:45:30] Connecting to http://130.237.165.141:80/
[01:45:30] - Couldn't send HTTP request to server
[01:45:30] + Could not connect to Work Server (results)
[01:45:30]     (130.237.165.141:80)
[01:45:30]   Could not transmit unit 01 to Collection server; keeping in queue.
[01:45:30] + Sent 0 of 1 completed units to the server
[01:45:30] - Autosend completed
[02:12:13] Completed 92500 out of 250000 steps  (37%)
[02:53:21] Completed 95000 out of 250000 steps  (38%)
[03:34:28] Completed 97500 out of 250000 steps  (39%)
[04:15:29] Completed 100000 out of 250000 steps  (40%)
[04:56:40] Completed 102500 out of 250000 steps  (41%)
[05:37:57] Completed 105000 out of 250000 steps  (42%)
[06:19:05] Completed 107500 out of 250000 steps  (43%)
[07:00:17] Completed 110000 out of 250000 steps  (44%)
[07:41:30] Completed 112500 out of 250000 steps  (45%)
[07:45:30] - Autosending finished units... [January 12 07:45:30 UTC]
[07:45:30] Trying to send all finished work units
[07:45:30] Project: 6900 (Run 10, Clone 20, Gen 15)


[07:45:30] + Attempting to send results [January 12 07:45:30 UTC]
[07:45:30] - Reading file work/wuresults_01.dat from core
[07:45:30]   (Read 100183264 bytes from disk)
[07:45:30] Connecting to http://130.237.232.141:8080/
[07:51:24] - Couldn't send HTTP request to server
[07:51:24] + Could not connect to Work Server (results)
[07:51:24]     (130.237.232.141:8080)
[07:51:24] + Retrying using alternative port
[07:51:24] Connecting to http://130.237.232.141:80/
[07:57:14] - Couldn't send HTTP request to server
[07:57:14] + Could not connect to Work Server (results)
[07:57:14]     (130.237.232.141:80)
[07:57:14] - Error: Could not transmit unit 01 (completed January 10) to work server.
[07:57:14] - 16 failed uploads of this unit.


[07:57:14] + Attempting to send results [January 12 07:57:14 UTC]
[07:57:14] - Reading file work/wuresults_01.dat from core
[07:57:14]   (Read 100183264 bytes from disk)
[07:57:14] Connecting to http://130.237.165.141:8080/
[07:57:15] - Couldn't send HTTP request to server
[07:57:15] + Could not connect to Work Server (results)
[07:57:15]     (130.237.165.141:8080)
[07:57:15] + Retrying using alternative port
[07:57:15] Connecting to http://130.237.165.141:80/
[07:57:15] - Couldn't send HTTP request to server
[07:57:15] + Could not connect to Work Server (results)
[07:57:15]     (130.237.165.141:80)
[07:57:15]   Could not transmit unit 01 to Collection server; keeping in queue.
[07:57:15] + Sent 0 of 1 completed units to the server
[07:57:15] - Autosend completed
[08:22:58] Completed 115000 out of 250000 steps  (46%)
[09:03:51] Completed 117500 out of 250000 steps  (47%)
[09:44:49] Completed 120000 out of 250000 steps  (48%)
[10:25:49] Completed 122500 out of 250000 steps  (49%)
[11:06:41] Completed 125000 out of 250000 steps  (50%)
[11:47:39] Completed 127500 out of 250000 steps  (51%)
[12:28:42] Completed 130000 out of 250000 steps  (52%)
[13:09:40] Completed 132500 out of 250000 steps  (53%)
[13:50:41] Completed 135000 out of 250000 steps  (54%)
[13:57:15] - Autosending finished units... [January 12 13:57:15 UTC]
[13:57:15] Trying to send all finished work units
[13:57:15] Project: 6900 (Run 10, Clone 20, Gen 15)


[13:57:15] + Attempting to send results [January 12 13:57:15 UTC]
[13:57:15] - Reading file work/wuresults_01.dat from core
[13:57:15]   (Read 100183264 bytes from disk)
[13:57:15] Connecting to http://130.237.232.141:8080/
[14:01:49] - Couldn't send HTTP request to server
[14:01:49] + Could not connect to Work Server (results)
[14:01:49]     (130.237.232.141:8080)
[14:01:49] + Retrying using alternative port
[14:01:49] Connecting to http://130.237.232.141:80/
[14:07:47] - Couldn't send HTTP request to server
[14:07:47] + Could not connect to Work Server (results)
[14:07:47]     (130.237.232.141:80)
[14:07:47] - Error: Could not transmit unit 01 (completed January 10) to work server.
[14:07:47] - 17 failed uploads of this unit.


[14:07:47] + Attempting to send results [January 12 14:07:47 UTC]
[14:07:47] - Reading file work/wuresults_01.dat from core
[14:07:47]   (Read 100183264 bytes from disk)
[14:07:47] Connecting to http://130.237.165.141:8080/
[14:07:47] - Couldn't send HTTP request to server
[14:07:47] + Could not connect to Work Server (results)
[14:07:47]     (130.237.165.141:8080)
[14:07:47] + Retrying using alternative port
[14:07:47] Connecting to http://130.237.165.141:80/
[14:07:47] - Couldn't send HTTP request to server
[14:07:47] + Could not connect to Work Server (results)
[14:07:47]     (130.237.165.141:80)
[14:07:47]   Could not transmit unit 01 to Collection server; keeping in queue.
[14:07:47] + Sent 0 of 1 completed units to the server
[14:07:47] - Autosend completed
[14:32:20] Completed 137500 out of 250000 steps  (55%)
[15:14:26] Completed 140000 out of 250000 steps  (56%)
[15:56:50] Completed 142500 out of 250000 steps  (57%)
[16:38:38] Completed 145000 out of 250000 steps  (58%)
[17:20:19] Completed 147500 out of 250000 steps  (59%)
[18:01:12] Completed 150000 out of 250000 steps  (60%)
[18:42:13] Completed 152500 out of 250000 steps  (61%)
[19:08:38] Killing all core threads
[19:08:38] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[19:08:38] ***** Got a SIGTERM signal (2)
[19:08:38] Killing all core threads
[19:08:38] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [January 12 19:19:57 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9 

[19:19:57] - Ask before connecting: No
[19:19:57] - User name: Howdy2u2 (Team 111065)
[19:19:57] - User ID: *********************
[19:19:57] - Machine ID: 2
[19:19:57] 
[19:19:57] Loaded queue successfully.
[19:19:57] 
[19:19:57] - Autosending finished units... [January 12 19:19:57 UTC]
[19:19:57] + Processing work unit
[19:19:57] Trying to send all finished work units
[19:19:57] Core required: FahCore_a3.exe
[19:19:57] Project: 6900 (Run 10, Clone 20, Gen 15)
[19:19:57] Core found.


[19:19:57] + Attempting to send results [January 12 19:19:57 UTC]
[19:19:57] - Reading file work/wuresults_01.dat from core
[19:19:59]   (Read 100183264 bytes from disk)[19:19:59] Working on queue slot 02 [January 12 19:19:59 UTC]

[19:19:59] + Working ...
[19:19:59] Connecting to http://130.237.232.141:8080/
[19:19:59] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 1664 -version 630'

[19:19:59] 
[19:19:59] *------------------------------*
[19:19:59] Folding@Home Gromacs SMP Core
[19:19:59] Version 2.22 (Mar 12, 2010)
[19:19:59] 
[19:19:59] Preparing to commence simulation
[19:19:59] - Ensuring status. Please wait.
[19:20:09] - Assembly optimizations manually forced on.
[19:20:09] - Not checking prior termination.
[19:20:15] - Expanded 26648218 -> 33000273 (decompressed 123.8 percent)
[19:20:15] Called DecompressByteArray: compressed_data_size=26648218 data_size=33000273, decompressed_data_size=33000273 diff=0
[19:20:15] - Digital signature verified
[19:20:15] 
[19:20:15] Project: 2685 (Run 3, Clone 0, Gen 47)
[19:20:15] 
[19:20:15] Assembly optimizations on if available.
[19:20:15] Entering M.D.
[19:20:21] Using Gromacs checkpoints
[19:20:29] Resuming from checkpoint
[19:20:29] Verified work/wudata_02.log
[19:20:29] Verified work/wudata_02.trr
[19:20:30] Verified work/wudata_02.xtc
[19:20:30] Verified work/wudata_02.edr
[19:20:31] Completed 154029 out of 250000 steps  (61%)
[19:31:17] - Couldn't send HTTP request to server
[19:31:17] + Could not connect to Work Server (results)
[19:31:17]     (130.237.232.141:8080)
[19:31:17] + Retrying using alternative port
[19:31:17] Connecting to http://130.237.232.141:80/
[19:35:30] - Couldn't send HTTP request to server
[19:35:30] + Could not connect to Work Server (results)
[19:35:30]     (130.237.232.141:80)
[19:35:30] - Error: Could not transmit unit 01 (completed January 10) to work server.
[19:35:30] - 18 failed uploads of this unit.


[19:35:30] + Attempting to send results [January 12 19:35:30 UTC]
[19:35:30] - Reading file work/wuresults_01.dat from core
[19:35:30]   (Read 100183264 bytes from disk)
[19:35:30] Connecting to http://130.237.165.141:8080/
[19:35:30] - Couldn't send HTTP request to server
[19:35:30] + Could not connect to Work Server (results)
[19:35:30]     (130.237.165.141:8080)
[19:35:30] + Retrying using alternative port
[19:35:30] Connecting to http://130.237.165.141:80/
[19:35:31] - Couldn't send HTTP request to server
[19:35:31] + Could not connect to Work Server (results)
[19:35:31]     (130.237.165.141:80)
[19:35:31]   Could not transmit unit 01 to Collection server; keeping in queue.
[19:35:31] + Sent 0 of 1 completed units to the server
[19:35:31] - Autosend completed
[19:36:37] Completed 155000 out of 250000 steps  (62%)
[20:17:24] Completed 157500 out of 250000 steps  (63%)
[20:57:55] Completed 160000 out of 250000 steps  (64%)
[21:38:51] Completed 162500 out of 250000 steps  (65%)
[22:19:44] Completed 165000 out of 250000 steps  (66%)
[23:00:44] Completed 167500 out of 250000 steps  (67%)
[23:41:49] Completed 170000 out of 250000 steps  (68%)
[00:22:47] Completed 172500 out of 250000 steps  (69%)
[01:03:46] Completed 175000 out of 250000 steps  (70%)
[01:35:31] - Autosending finished units... [January 13 01:35:31 UTC]
[01:35:31] Trying to send all finished work units
[01:35:31] Project: 6900 (Run 10, Clone 20, Gen 15)


[01:35:31] + Attempting to send results [January 13 01:35:31 UTC]
[01:35:31] - Reading file work/wuresults_01.dat from core
[01:35:31]   (Read 100183264 bytes from disk)
[01:35:31] Connecting to http://130.237.232.141:8080/
[01:40:02] - Couldn't send HTTP request to server
[01:40:02] + Could not connect to Work Server (results)
[01:40:02]     (130.237.232.141:8080)
[01:40:02] + Retrying using alternative port
[01:40:02] Connecting to http://130.237.232.141:80/
[01:42:59] - Couldn't send HTTP request to server
[01:42:59] + Could not connect to Work Server (results)
[01:42:59]     (130.237.232.141:80)
[01:42:59] - Error: Could not transmit unit 01 (completed January 10) to work server.
[01:42:59] - 19 failed uploads of this unit.


[01:42:59] + Attempting to send results [January 13 01:42:59 UTC]
[01:42:59] - Reading file work/wuresults_01.dat from core
[01:42:59]   (Read 100183264 bytes from disk)
[01:42:59] Connecting to http://130.237.165.141:8080/
[01:42:59] - Couldn't send HTTP request to server
[01:42:59] + Could not connect to Work Server (results)
[01:42:59]     (130.237.165.141:8080)
[01:42:59] + Retrying using alternative port
[01:42:59] Connecting to http://130.237.165.141:80/
[01:43:00] - Couldn't send HTTP request to server
[01:43:00] + Could not connect to Work Server (results)
[01:43:00]     (130.237.165.141:80)
[01:43:00]   Could not transmit unit 01 to Collection server; keeping in queue.
[01:43:00] + Sent 0 of 1 completed units to the server
[01:43:00] - Autosend completed
[01:44:54] Completed 177500 out of 250000 steps  (71%)
[02:25:55] Completed 180000 out of 250000 steps  (72%)
[03:07:02] Completed 182500 out of 250000 steps  (73%)
[03:48:16] Completed 185000 out of 250000 steps  (74%)
[04:29:10] Completed 187500 out of 250000 steps  (75%)
[05:10:13] Completed 190000 out of 250000 steps  (76%)
[05:51:11] Completed 192500 out of 250000 steps  (77%)
[06:32:12] Completed 195000 out of 250000 steps  (78%)
[07:13:17] Completed 197500 out of 250000 steps  (79%)
[07:43:00] - Autosending finished units... [January 13 07:43:00 UTC]
[07:43:00] Trying to send all finished work units
[07:43:00] Project: 6900 (Run 10, Clone 20, Gen 15)


[07:43:00] + Attempting to send results [January 13 07:43:00 UTC]
[07:43:00] - Reading file work/wuresults_01.dat from core
[07:43:00]   (Read 100183264 bytes from disk)
[07:43:00] Connecting to http://130.237.232.141:8080/
[07:45:51] - Couldn't send HTTP request to server
[07:45:51] + Could not connect to Work Server (results)
[07:45:51]     (130.237.232.141:8080)
[07:45:51] + Retrying using alternative port
[07:45:51] Connecting to http://130.237.232.141:80/
[07:51:27] - Couldn't send HTTP request to server
[07:51:27] + Could not connect to Work Server (results)
[07:51:27]     (130.237.232.141:80)
[07:51:27] - Error: Could not transmit unit 01 (completed January 10) to work server.
[07:51:27] - 20 failed uploads of this unit.


[07:51:27] + Attempting to send results [January 13 07:51:27 UTC]
[07:51:27] - Reading file work/wuresults_01.dat from core
[07:51:27]   (Read 100183264 bytes from disk)
[07:51:27] Connecting to http://130.237.165.141:8080/
[07:51:28] - Couldn't send HTTP request to server
[07:51:28] + Could not connect to Work Server (results)
[07:51:28]     (130.237.165.141:8080)
[07:51:28] + Retrying using alternative port
[07:51:28] Connecting to http://130.237.165.141:80/
[07:51:28] - Couldn't send HTTP request to server
[07:51:28] + Could not connect to Work Server (results)
[07:51:28]     (130.237.165.141:80)
[07:51:28]   Could not transmit unit 01 to Collection server; keeping in queue.
[07:51:28] + Sent 0 of 1 completed units to the server
[07:51:28] - Autosend completed
[07:54:39] Completed 200000 out of 250000 steps  (80%)
[08:36:47] Completed 202500 out of 250000 steps  (81%)
[09:18:46] Completed 205000 out of 250000 steps  (82%)
[10:00:47] Completed 207500 out of 250000 steps  (83%)
[10:42:31] Completed 210000 out of 250000 steps  (84%)
[11:24:23] Completed 212500 out of 250000 steps  (85%)
[12:06:12] Completed 215000 out of 250000 steps  (86%)
[12:48:13] Completed 217500 out of 250000 steps  (87%)
[13:30:12] Completed 220000 out of 250000 steps  (88%)
[13:51:28] - Autosending finished units... [January 13 13:51:28 UTC]
[13:51:28] Trying to send all finished work units
[13:51:28] Project: 6900 (Run 10, Clone 20, Gen 15)


[13:51:28] + Attempting to send results [January 13 13:51:28 UTC]
[13:51:28] - Reading file work/wuresults_01.dat from core
[13:51:28]   (Read 100183264 bytes from disk)
[13:51:28] Connecting to http://130.237.232.141:8080/
[13:57:58] - Couldn't send HTTP request to server
[13:57:58] + Could not connect to Work Server (results)
[13:57:58]     (130.237.232.141:8080)
[13:57:58] + Retrying using alternative port
[13:57:58] Connecting to http://130.237.232.141:80/
[14:04:08] - Couldn't send HTTP request to server
[14:04:08] + Could not connect to Work Server (results)
[14:04:08]     (130.237.232.141:80)
[14:04:08] - Error: Could not transmit unit 01 (completed January 10) to work server.
[14:04:08] - 21 failed uploads of this unit.


[14:04:08] + Attempting to send results [January 13 14:04:08 UTC]
[14:04:08] - Reading file work/wuresults_01.dat from core
[14:04:08]   (Read 100183264 bytes from disk)
[14:04:08] Connecting to http://130.237.165.141:8080/
[14:04:08] - Couldn't send HTTP request to server
[14:04:08] + Could not connect to Work Server (results)
[14:04:08]     (130.237.165.141:8080)
[14:04:08] + Retrying using alternative port
[14:04:08] Connecting to http://130.237.165.141:80/
[14:04:08] - Couldn't send HTTP request to server
[14:04:08] + Could not connect to Work Server (results)
[14:04:08]     (130.237.165.141:80)
[14:04:08]   Could not transmit unit 01 to Collection server; keeping in queue.
[14:04:08] + Sent 0 of 1 completed units to the server
[14:04:08] - Autosend completed
[14:12:05] Completed 222500 out of 250000 steps  (89%)
[14:54:04] Completed 225000 out of 250000 steps  (90%)
[15:36:06] Completed 227500 out of 250000 steps  (91%)
[16:18:02] Completed 230000 out of 250000 steps  (92%)
[16:59:35] Completed 232500 out of 250000 steps  (93%)
[17:40:36] Completed 235000 out of 250000 steps  (94%)
[18:21:37] Completed 237500 out of 250000 steps  (95%)
[19:02:28] Completed 240000 out of 250000 steps  (96%)
[19:44:00] Completed 242500 out of 250000 steps  (97%)
[20:04:08] - Autosending finished units... [January 13 20:04:08 UTC]
[20:04:08] Trying to send all finished work units
[20:04:08] Project: 6900 (Run 10, Clone 20, Gen 15)


[20:04:08] + Attempting to send results [January 13 20:04:08 UTC]
[20:04:08] - Reading file work/wuresults_01.dat from core
[20:04:08]   (Read 100183264 bytes from disk)
[20:04:08] Connecting to http://130.237.232.141:8080/
[20:07:09] - Couldn't send HTTP request to server
[20:07:09] + Could not connect to Work Server (results)
[20:07:09]     (130.237.232.141:8080)
[20:07:09] + Retrying using alternative port
[20:07:09] Connecting to http://130.237.232.141:80/
[20:13:15] - Couldn't send HTTP request to server
[20:13:15] + Could not connect to Work Server (results)
[20:13:15]     (130.237.232.141:80)
[20:13:15] - Error: Could not transmit unit 01 (completed January 10) to work server.
[20:13:15] - 22 failed uploads of this unit.


[20:13:15] + Attempting to send results [January 13 20:13:15 UTC]
[20:13:15] - Reading file work/wuresults_01.dat from core
[20:13:15]   (Read 100183264 bytes from disk)
[20:13:15] Connecting to http://130.237.165.141:8080/
[20:13:15] - Couldn't send HTTP request to server
[20:13:15] + Could not connect to Work Server (results)
[20:13:15]     (130.237.165.141:8080)
[20:13:15] + Retrying using alternative port
[20:13:15] Connecting to http://130.237.165.141:80/
[20:13:15] - Couldn't send HTTP request to server
[20:13:15] + Could not connect to Work Server (results)
[20:13:15]     (130.237.165.141:80)
[20:13:15]   Could not transmit unit 01 to Collection server; keeping in queue.
[20:13:15] + Sent 0 of 1 completed units to the server
[20:13:15] - Autosend completed
[20:24:40] Completed 245000 out of 250000 steps  (98%)
[21:05:43] Completed 247500 out of 250000 steps  (99%)
[21:46:44] Completed 250000 out of 250000 steps  (100%)
[21:47:00] DynamicWrapper: Finished Work Unit: sleep=10000
[21:47:10] 
[21:47:10] Finished Work Unit:
[21:47:10] - Reading up to 56491680 from "work/wudata_02.trr": Read 56491680
[21:47:10] trr file hash check passed.
[21:47:10] - Reading up to 45775196 from "work/wudata_02.xtc": Read 45775196
[21:47:10] xtc file hash check passed.
[21:47:10] edr file hash check passed.
[21:47:10] logfile size: 284064
[21:47:10] Leaving Run
[21:47:11] - Writing 102718880 bytes of core data to disk...
[21:47:13]   ... Done.
[21:47:43] - Shutting down core
[21:47:43] 
[21:47:43] Folding@home Core Shutdown: FINISHED_UNIT
[21:47:53] CoreStatus = 64 (100)
[21:47:53] Unit 2 finished with 52 percent of time to deadline remaining.
[21:47:53] Updated performance fraction: 0.536139
[21:47:53] Sending work to server
[21:47:53] Project: 2685 (Run 3, Clone 0, Gen 47)


[21:47:53] + Attempting to send results [January 13 21:47:53 UTC]
[21:47:53] - Reading file work/wuresults_02.dat from core
[21:47:53]   (Read 102718880 bytes from disk)
[21:47:53] Connecting to http://171.67.108.22:8080/
[22:07:31] Posted data.
[22:07:31] Initial: 0000; - Uploaded at ~84 kB/s
[22:07:36] - Averaged speed for that direction ~84 kB/s
[22:07:36] + Results successfully sent
[22:07:36] Thank you for your contribution to Folding@Home.
[22:07:36] + Number of Units Completed: 47

[22:07:44] Trying to send all finished work units
[22:07:44] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:07:44] + Attempting to send results [January 13 22:07:44 UTC]
[22:07:44] - Reading file work/wuresults_01.dat from core
[22:07:44]   (Read 100183264 bytes from disk)
[22:07:44] Connecting to http://130.237.232.141:8080/
[22:12:34] - Couldn't send HTTP request to server
[22:12:34] + Could not connect to Work Server (results)
[22:12:34]     (130.237.232.141:8080)
[22:12:34] + Retrying using alternative port
[22:12:34] Connecting to http://130.237.232.141:80/
[22:16:10] - Couldn't send HTTP request to server
[22:16:10] + Could not connect to Work Server (results)
[22:16:10]     (130.237.232.141:80)
[22:16:10] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:16:10] - 23 failed uploads of this unit.


[22:16:10] + Attempting to send results [January 13 22:16:10 UTC]
[22:16:10] - Reading file work/wuresults_01.dat from core
[22:16:10]   (Read 100183264 bytes from disk)
[22:16:10] Connecting to http://130.237.165.141:8080/
[22:16:10] - Couldn't send HTTP request to server
[22:16:10] + Could not connect to Work Server (results)
[22:16:10]     (130.237.165.141:8080)
[22:16:10] + Retrying using alternative port
[22:16:10] Connecting to http://130.237.165.141:80/
[22:16:10] - Couldn't send HTTP request to server
[22:16:10] + Could not connect to Work Server (results)
[22:16:10]     (130.237.165.141:80)
[22:16:10]   Could not transmit unit 01 to Collection server; keeping in queue.
[22:16:10] + Sent 0 of 1 completed units to the server
[22:16:40] Trying to send all finished work units
[22:16:40] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:16:40] + Attempting to send results [January 13 22:16:40 UTC]
[22:16:40] - Reading file work/wuresults_01.dat from core
[22:16:40]   (Read 100183264 bytes from disk)
[22:16:40] Connecting to http://130.237.232.141:8080/
[22:23:55] - Couldn't send HTTP request to server
[22:23:55] + Could not connect to Work Server (results)
[22:23:55]     (130.237.232.141:8080)
[22:23:55] + Retrying using alternative port
[22:23:55] Connecting to http://130.237.232.141:80/
[22:27:16] - Couldn't send HTTP request to server
[22:27:16] + Could not connect to Work Server (results)
[22:27:16]     (130.237.232.141:80)
[22:27:16] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:27:16] - 24 failed uploads of this unit.


[22:27:16] + Attempting to send results [January 13 22:27:16 UTC]
[22:27:16] - Reading file work/wuresults_01.dat from core
[22:27:16]   (Read 100183264 bytes from disk)
[22:27:16] Connecting to http://130.237.165.141:8080/
[22:27:16] - Couldn't send HTTP request to server
[22:27:16] + Could not connect to Work Server (results)
[22:27:16]     (130.237.165.141:8080)
[22:27:16] + Retrying using alternative port
[22:27:16] Connecting to http://130.237.165.141:80/
[22:27:16] - Couldn't send HTTP request to server
[22:27:16] + Could not connect to Work Server (results)
[22:27:16]     (130.237.165.141:80)
[22:27:16]   Could not transmit unit 01 to Collection server; keeping in queue.
[22:27:16] + Sent 0 of 1 completed units to the server
[22:27:46] Trying to send all finished work units
[22:27:46] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:27:46] + Attempting to send results [January 13 22:27:46 UTC]
[22:27:46] - Reading file work/wuresults_01.dat from core
[22:27:47]   (Read 100183264 bytes from disk)
[22:27:47] Connecting to http://130.237.232.141:8080/
[22:32:51] - Couldn't send HTTP request to server
[22:32:51] + Could not connect to Work Server (results)
[22:32:51]     (130.237.232.141:8080)
[22:32:51] + Retrying using alternative port
[22:32:51] Connecting to http://130.237.232.141:80/
[22:43:02] - Couldn't send HTTP request to server
[22:43:02] + Could not connect to Work Server (results)
[22:43:02]     (130.237.232.141:80)
[22:43:02] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:43:02] - 25 failed uploads of this unit.


[22:43:02] + Attempting to send results [January 13 22:43:02 UTC]
[22:43:02] - Reading file work/wuresults_01.dat from core
[22:43:02]   (Read 100183264 bytes from disk)
[22:43:02] Connecting to http://130.237.165.141:8080/
[22:43:02] - Couldn't send HTTP request to server
[22:43:02] + Could not connect to Work Server (results)
[22:43:02]     (130.237.165.141:8080)
[22:43:02] + Retrying using alternative port
[22:43:02] Connecting to http://130.237.165.141:80/
[22:43:02] - Couldn't send HTTP request to server
[22:43:02] + Could not connect to Work Server (results)
[22:43:02]     (130.237.165.141:80)
[22:43:02]   Could not transmit unit 01 to Collection server; keeping in queue.
[22:43:02] + Sent 0 of 1 completed units to the server
[22:43:32] Trying to send all finished work units
[22:43:32] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:43:32] + Attempting to send results [January 13 22:43:32 UTC]
[22:43:32] - Reading file work/wuresults_01.dat from core
[22:43:32]   (Read 100183264 bytes from disk)
[22:43:32] Connecting to http://130.237.232.141:8080/
[22:46:20] - Couldn't send HTTP request to server
[22:46:20] + Could not connect to Work Server (results)
[22:46:20]     (130.237.232.141:8080)
[22:46:20] + Retrying using alternative port
[22:46:20] Connecting to http://130.237.232.141:80/
[22:49:15] - Couldn't send HTTP request to server
[22:49:15] + Could not connect to Work Server (results)
[22:49:15]     (130.237.232.141:80)
[22:49:15] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:49:15] - 26 failed uploads of this unit.


[22:49:15] + Attempting to send results [January 13 22:49:15 UTC]
[22:49:15] - Reading file work/wuresults_01.dat from core
[22:49:15]   (Read 100183264 bytes from disk)
[22:49:15] Connecting to http://130.237.165.141:8080/
[22:49:16] - Couldn't send HTTP request to server
[22:49:16] + Could not connect to Work Server (results)
[22:49:16]     (130.237.165.141:8080)
[22:49:16] + Retrying using alternative port
[22:49:16] Connecting to http://130.237.165.141:80/
[22:49:16] - Couldn't send HTTP request to server
[22:49:16] + Could not connect to Work Server (results)
[22:49:16]     (130.237.165.141:80)
[22:49:16]   Could not transmit unit 01 to Collection server; keeping in queue.
[22:49:16] + Sent 0 of 1 completed units to the server
[22:49:46] Trying to send all finished work units
[22:49:46] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:49:46] + Attempting to send results [January 13 22:49:46 UTC]
[22:49:46] - Reading file work/wuresults_01.dat from core
[22:49:46]   (Read 100183264 bytes from disk)
[22:49:46] Connecting to http://130.237.232.141:8080/
[22:52:29] - Couldn't send HTTP request to server
[22:52:29] + Could not connect to Work Server (results)
[22:52:29]     (130.237.232.141:8080)
[22:52:29] + Retrying using alternative port
[22:52:29] Connecting to http://130.237.232.141:80/
[22:55:59] - Couldn't send HTTP request to server
[22:55:59] + Could not connect to Work Server (results)
[22:55:59]     (130.237.232.141:80)
[22:55:59] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:55:59] - 27 failed uploads of this unit.


[22:55:59] + Attempting to send results [January 13 22:55:59 UTC]
[22:55:59] - Reading file work/wuresults_01.dat from core
[22:55:59]   (Read 100183264 bytes from disk)
[22:55:59] Connecting to http://130.237.165.141:8080/
[22:56:00] - Couldn't send HTTP request to server
[22:56:00] + Could not connect to Work Server (results)
[22:56:00]     (130.237.165.141:8080)
[22:56:00] + Retrying using alternative port
[22:56:00] Connecting to http://130.237.165.141:80/
[22:56:00] - Couldn't send HTTP request to server
[22:56:00] + Could not connect to Work Server (results)
[22:56:00]     (130.237.165.141:80)
[22:56:00]   Could not transmit unit 01 to Collection server; keeping in queue.
[22:56:00] + Sent 0 of 1 completed units to the server
[22:56:30] Trying to send all finished work units
[22:56:30] Project: 6900 (Run 10, Clone 20, Gen 15)


[22:56:30] + Attempting to send results [January 13 22:56:30 UTC]
[22:56:30] - Reading file work/wuresults_01.dat from core
[22:56:30]   (Read 100183264 bytes from disk)
[22:56:30] Connecting to http://130.237.232.141:8080/
[23:02:05] - Couldn't send HTTP request to server
[23:02:05] + Could not connect to Work Server (results)
[23:02:05]     (130.237.232.141:8080)
[23:02:05] + Retrying using alternative port
[23:02:05] Connecting to http://130.237.232.141:80/
[23:04:52] - Couldn't send HTTP request to server
[23:04:52] + Could not connect to Work Server (results)
[23:04:52]     (130.237.232.141:80)
[23:04:52] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:04:52] - 28 failed uploads of this unit.


[23:04:52] + Attempting to send results [January 13 23:04:52 UTC]
[23:04:52] - Reading file work/wuresults_01.dat from core
[23:04:52]   (Read 100183264 bytes from disk)
[23:04:52] Connecting to http://130.237.165.141:8080/
[23:04:53] - Couldn't send HTTP request to server
[23:04:53] + Could not connect to Work Server (results)
[23:04:53]     (130.237.165.141:8080)
[23:04:53] + Retrying using alternative port
[23:04:53] Connecting to http://130.237.165.141:80/
[23:04:53] - Couldn't send HTTP request to server
[23:04:53] + Could not connect to Work Server (results)
[23:04:53]     (130.237.165.141:80)
[23:04:53]   Could not transmit unit 01 to Collection server; keeping in queue.
[23:04:53] + Sent 0 of 1 completed units to the server
[23:05:23] Trying to send all finished work units
[23:05:23] Project: 6900 (Run 10, Clone 20, Gen 15)


[23:05:23] + Attempting to send results [January 13 23:05:23 UTC]
[23:05:23] - Reading file work/wuresults_01.dat from core
[23:05:23]   (Read 100183264 bytes from disk)
[23:05:23] Connecting to http://130.237.232.141:8080/
[23:11:43] - Couldn't send HTTP request to server
[23:11:43] + Could not connect to Work Server (results)
[23:11:43]     (130.237.232.141:8080)
[23:11:43] + Retrying using alternative port
[23:11:43] Connecting to http://130.237.232.141:80/
[23:14:55] - Couldn't send HTTP request to server
[23:14:55] + Could not connect to Work Server (results)
[23:14:55]     (130.237.232.141:80)
[23:14:55] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:14:55] - 29 failed uploads of this unit.


[23:14:55] + Attempting to send results [January 13 23:14:55 UTC]
[23:14:55] - Reading file work/wuresults_01.dat from core
[23:14:55]   (Read 100183264 bytes from disk)
[23:14:55] Connecting to http://130.237.165.141:8080/
[23:14:56] - Couldn't send HTTP request to server
[23:14:56] + Could not connect to Work Server (results)
[23:14:56]     (130.237.165.141:8080)
[23:14:56] + Retrying using alternative port
[23:14:56] Connecting to http://130.237.165.141:80/
[23:14:56] - Couldn't send HTTP request to server
[23:14:56] + Could not connect to Work Server (results)
[23:14:56]     (130.237.165.141:80)
[23:14:56]   Could not transmit unit 01 to Collection server; keeping in queue.
[23:14:56] + Sent 0 of 1 completed units to the server
[23:15:26] Trying to send all finished work units
[23:15:26] Project: 6900 (Run 10, Clone 20, Gen 15)


[23:15:26] + Attempting to send results [January 13 23:15:26 UTC]
[23:15:26] - Reading file work/wuresults_01.dat from core
[23:15:26]   (Read 100183264 bytes from disk)
[23:15:26] Connecting to http://130.237.232.141:8080/
[23:18:47] - Couldn't send HTTP request to server
[23:18:47] + Could not connect to Work Server (results)
[23:18:47]     (130.237.232.141:8080)
[23:18:47] + Retrying using alternative port
[23:18:47] Connecting to http://130.237.232.141:80/
[23:22:49] - Couldn't send HTTP request to server
[23:22:49] + Could not connect to Work Server (results)
[23:22:49]     (130.237.232.141:80)
[23:22:49] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:22:49] - 30 failed uploads of this unit.


[23:22:49] + Attempting to send results [January 13 23:22:49 UTC]
[23:22:49] - Reading file work/wuresults_01.dat from core
[23:22:50]   (Read 100183264 bytes from disk)
[23:22:50] Connecting to http://130.237.165.141:8080/
[23:22:50] - Couldn't send HTTP request to server
[23:22:50] + Could not connect to Work Server (results)
[23:22:50]     (130.237.165.141:8080)
[23:22:50] + Retrying using alternative port
[23:22:50] Connecting to http://130.237.165.141:80/
[23:22:50] - Couldn't send HTTP request to server
[23:22:50] + Could not connect to Work Server (results)
[23:22:50]     (130.237.165.141:80)
[23:22:50]   Could not transmit unit 01 to Collection server; keeping in queue.
[23:22:50] + Sent 0 of 1 completed units to the server
[23:23:20] Trying to send all finished work units
[23:23:20] Project: 6900 (Run 10, Clone 20, Gen 15)


[23:23:20] + Attempting to send results [January 13 23:23:20 UTC]
[23:23:20] - Reading file work/wuresults_01.dat from core
[23:23:20]   (Read 100183264 bytes from disk)
[23:23:20] Connecting to http://130.237.232.141:8080/
Last edited by Howdy2u2 on Fri Jan 14, 2011 1:58 am, edited 1 time in total.
k1wi
Posts: 909
Joined: Tue Sep 22, 2009 10:48 pm

Re: P6900 unable to upload

Post by k1wi »

It won't be the number of hops - mine takes 22 and I upload fine. I think it's going to probably take one of the Stanford guys to look at this.
Image
Howdy2u2
Posts: 9
Joined: Tue Sep 21, 2010 9:08 pm

Re: P6900 unable to upload

Post by Howdy2u2 »

And how does one get them involved in something like this?
It finally quit trying to upload it also as the deadline has passed.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

smp server 130.237.232.141 was not accepting WUs?

Post by -alias- »

The smp server 130.237.232.141 do not accept my HTTP request to server. This have been going on for 6 hours now. Is there anything I can do to make it work again? My Fermi WUs in the same rig is going up as normal. My log:

Code: Select all

[16:42:04] Completed 250000 out of 250000 steps  (100%)
[16:42:19] DynamicWrapper: Finished Work Unit: sleep=10000
[16:42:29] 
[16:42:29] Finished Work Unit:
[16:42:29] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[16:42:29] trr file hash check passed.
[16:42:29] - Reading up to 47029732 from "work/wudata_05.xtc": Read 47029732
[16:42:29] xtc file hash check passed.
[16:42:29] edr file hash check passed.
[16:42:29] logfile size: 274592
[16:42:29] Leaving Run
[16:42:32] - Writing 100185384 bytes of core data to disk...
[16:42:34]   ... Done.
[16:42:45] - Shutting down core
[16:42:45] 
[16:42:45] Folding@home Core Shutdown: FINISHED_UNIT
[16:42:48] CoreStatus = 64 (100)
[16:42:48] Unit 5 finished with 55 percent of time to deadline remaining.
[16:42:48] Updated performance fraction: 0.526366
[16:42:48] Sending work to server
[16:42:48] Project: 6900 (Run 4, Clone 11, Gen 21)


[16:42:48] + Attempting to send results [January 18 16:42:48 UTC]
[16:42:48] - Reading file work/wuresults_05.dat from core
[16:42:48]   (Read 100185384 bytes from disk)
[16:42:48] Connecting to http://130.237.232.141:8080/
[16:42:48] - Couldn't send HTTP request to server
[16:42:48] + Could not connect to Work Server (results)
[16:42:48]     (130.237.232.141:8080)
[16:42:48] + Retrying using alternative port
[16:42:48] Connecting to http://130.237.232.141:80/
[16:42:48] - Couldn't send HTTP request to server
[16:42:48] + Could not connect to Work Server (results)
[16:42:48]     (130.237.232.141:80)
[16:42:48] - Error: Could not transmit unit 05 (completed January 18) to work server.
[16:42:48] - 1 failed uploads of this unit.
[16:42:48]   Keeping unit 05 in queue.
[16:42:48] Trying to send all finished work units
[16:42:48] Project: 6900 (Run 4, Clone 11, Gen 21)


[16:42:48] + Attempting to send results [January 18 16:42:48 UTC]
[16:42:48] - Reading file work/wuresults_05.dat from core
[16:42:48]   (Read 100185384 bytes from disk)
[16:42:48] Connecting to http://130.237.232.141:8080/
[16:42:49] - Couldn't send HTTP request to server
[16:42:49] + Could not connect to Work Server (results)
[16:42:49]     (130.237.232.141:8080)
[16:42:49] + Retrying using alternative port
[16:42:49] Connecting to http://130.237.232.141:80/
[16:42:49] - Couldn't send HTTP request to server
[16:42:49] + Could not connect to Work Server (results)
[16:42:49]     (130.237.232.141:80)
[16:42:49] - Error: Could not transmit unit 05 (completed January 18) to work server.
[16:42:49] - 2 failed uploads of this unit.


[16:42:49] + Attempting to send results [January 18 16:42:49 UTC]
[16:42:49] - Reading file work/wuresults_05.dat from core
[16:42:49]   (Read 100185384 bytes from disk)
[16:42:49] Connecting to http://130.237.165.141:8080/
[16:42:49] - Couldn't send HTTP request to server
[16:42:49] + Could not connect to Work Server (results)
[16:42:49]     (130.237.165.141:8080)
[16:42:49] + Retrying using alternative port
[16:42:49] Connecting to http://130.237.165.141:80/
[16:42:49] - Couldn't send HTTP request to server
[16:42:49] + Could not connect to Work Server (results)
[16:42:49]     (130.237.165.141:80)
[16:42:49]   Could not transmit unit 05 to Collection server; keeping in queue.
[16:42:49] + Sent 0 of 1 completed units to the server
[16:42:49] - Preparing to get new work unit...
[16:42:49] Cleaning up work directory
[16:42:50] + Attempting to get work packet
[16:42:50] Passkey found
[16:42:50] - Will indicate memory of 6133 MB
[16:42:50] - Connecting to assignment server
[16:42:50] Connecting to http://assign.stanford.edu:8080/
[16:42:52] Posted data.
[16:42:52] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[16:42:52] + News From Folding@Home: Welcome to Folding@Home
[16:42:52] Loaded queue successfully.
[16:42:52] Sent data
[16:42:52] Connecting to http://171.67.108.22:8080/
[16:43:02] Posted data.
[16:43:02] Initial: 0000; - Receiving payload (expected size: 25473204)
[16:46:14] - Downloaded at ~129 kB/s
[16:46:14] - Averaged speed for that direction ~483 kB/s
[16:46:14] + Received work.
[16:46:15] Trying to send all finished work units
[16:46:15] Project: 6900 (Run 4, Clone 11, Gen 21)


[16:46:15] + Attempting to send results [January 18 16:46:15 UTC]
[16:46:15] - Reading file work/wuresults_05.dat from core
[16:46:15]   (Read 100185384 bytes from disk)
[16:46:15] Connecting to http://130.237.232.141:8080/
[16:46:15] - Couldn't send HTTP request to server
[16:46:15] + Could not connect to Work Server (results)
[16:46:15]     (130.237.232.141:8080)
[16:46:15] + Retrying using alternative port
[16:46:15] Connecting to http://130.237.232.141:80/
[16:46:15] - Couldn't send HTTP request to server
[16:46:15] + Could not connect to Work Server (results)
[16:46:15]     (130.237.232.141:80)
[16:46:15] - Error: Could not transmit unit 05 (completed January 18) to work server.
[16:46:15] - 3 failed uploads of this unit.


[16:46:15] + Attempting to send results [January 18 16:46:15 UTC]
[16:46:15] - Reading file work/wuresults_05.dat from core
[16:46:15]   (Read 100185384 bytes from disk)
[16:46:15] Connecting to http://130.237.165.141:8080/
[16:46:15] - Couldn't send HTTP request to server
[16:46:15] + Could not connect to Work Server (results)
[16:46:15]     (130.237.165.141:8080)
[16:46:15] + Retrying using alternative port
[16:46:15] Connecting to http://130.237.165.141:80/
[16:46:15] - Couldn't send HTTP request to server
[16:46:15] + Could not connect to Work Server (results)
[16:46:15]     (130.237.165.141:80)
[16:46:15]   Could not transmit unit 05 to Collection server; keeping in queue.
[16:46:15] + Sent 0 of 1 completed units to the server
[16:46:15] + Closed connections
[16:46:15] 
[16:46:15] + Processing work unit
[16:46:15] Core required: FahCore_a3.exe
[16:46:15] Core found.
[16:46:15] Working on queue slot 06 [January 18 16:46:15 UTC]
[16:46:15] + Working ...
[16:46:15] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 3 -verbose -lifeline 2724 -version 630'

[16:46:15] 
[16:46:15] *------------------------------*
[16:46:15] Folding@Home Gromacs SMP Core
[16:46:15] Version 2.22 (Mar 12, 2010)
[16:46:15] 
[16:46:15] Preparing to commence simulation
[16:46:15] - Looking at optimizations...
[16:46:15] - Created dyn
[16:46:15] - Files status OK
[16:46:20] - Expanded 25472692 -> 31941441 (decompressed 125.3 percent)
[16:46:20] Called DecompressByteArray: compressed_data_size=25472692 data_size=31941441, decompressed_data_size=31941441 diff=0
[16:46:20] - Digital signature verified
[16:46:20] 
[16:46:20] Project: 2686 (Run 8, Clone 14, Gen 61)
[16:46:20] 
[16:46:21] Assembly optimizations on if available.
[16:46:21] Entering M.D.
[16:46:30] Completed 0 out of 250000 steps  (0%)
[17:24:54] Completed 2500 out of 250000 steps  (1%)
[18:03:25] Completed 5000 out of 250000 steps  (2%)
[18:41:51] Completed 7500 out of 250000 steps  (3%)
[19:20:18] Completed 10000 out of 250000 steps  (4%)
[19:58:45] Completed 12500 out of 250000 steps  (5%)
[20:37:38] Completed 15000 out of 250000 steps  (6%)
[21:16:36] Completed 17500 out of 250000 steps  (7%)
[21:55:40] Completed 20000 out of 250000 steps  (8%)
[22:16:15] - Autosending finished units... [January 18 22:16:15 UTC]
[22:16:15] Trying to send all finished work units
[22:16:15] Project: 6900 (Run 4, Clone 11, Gen 21)


[22:16:15] + Attempting to send results [January 18 22:16:15 UTC]
[22:16:15] - Reading file work/wuresults_05.dat from core
[22:16:15]   (Read 100185384 bytes from disk)
[22:16:15] Connecting to http://130.237.232.141:8080/
[22:16:15] - Couldn't send HTTP request to server
[22:16:15] + Could not connect to Work Server (results)
[22:16:15]     (130.237.232.141:8080)
[22:16:15] + Retrying using alternative port
[22:16:15] Connecting to http://130.237.232.141:80/
[22:16:15] - Couldn't send HTTP request to server
[22:16:15] + Could not connect to Work Server (results)
[22:16:15]     (130.237.232.141:80)
[22:16:15] - Error: Could not transmit unit 05 (completed January 18) to work server.
[22:16:15] - 4 failed uploads of this unit.


[22:16:15] + Attempting to send results [January 18 22:16:15 UTC]
[22:16:15] - Reading file work/wuresults_05.dat from core
[22:16:15]   (Read 100185384 bytes from disk)
[22:16:15] Connecting to http://130.237.165.141:8080/
[22:16:15] - Couldn't send HTTP request to server
[22:16:15] + Could not connect to Work Server (results)
[22:16:15]     (130.237.165.141:8080)
[22:16:15] + Retrying using alternative port
[22:16:15] Connecting to http://130.237.165.141:80/
[22:16:15] - Couldn't send HTTP request to server
[22:16:15] + Could not connect to Work Server (results)
[22:16:15]     (130.237.165.141:80)
[22:16:15]   Could not transmit unit 05 to Collection server; keeping in queue.
[22:16:15] + Sent 0 of 1 completed units to the server
[22:16:15] - Autosend completed
[22:34:44] Completed 22500 out of 250000 steps  (9%)
Edit: I did a reset on the computer and router, and the WU went over. It seems that the problem is solved at this time, but I am not sure that it was the reset that made the trick. Maybe the server accepted again!
dthornycroft
Posts: 1
Joined: Tue Feb 15, 2011 2:02 pm

Re: P6900 unable to upload

Post by dthornycroft »

Hey all

I'm new to the forum, although been folding for over 3 years now. I have two i7-860s running with SMP -bigadv as well as GPUv3. My Windows Server 2008 system returns bigadv results fine, as well as GPU results fine.

However, I'm getting the same problem as this poor dude - on my Windows 7 32-bit system, GPU uploads fine, but SMP P6900 will not upload - The IP address I entered into my browser showed 'OK' as well. I have a good upload speed (140K/sec) but I experience exactly the same - 'unable to connect to work server' again and again until it times out and we loose the WU results :-(

Any ideas people?
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 130.237.232.141 (P6900 unable to upload)

Post by kasson »

Are they on the same network? Because these are large upload packets, things like a DSL modem dropping connection (or packet shaping by your ISP, though it sounds like that might not be the case here) could cause problems for bigadv but not GPU.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 130.237.232.141 (P6900 unable to upload)

Post by bruce »

Something happened between
[00:41:10] - Connecting to assignment server
[00:41:10] (Read 100183264 bytes from disk)
and
[00:45:18] + Could not connect to Work Server (results)
[00:45:18] (130.237.232.141:8080)

though it's not identical, note the similarities here:
[00:45:18] Connecting to http://130.237.232.141:80/
[00:48:25] - Couldn't send HTTP request to server
[00:48:25] + Could not connect to Work Server (results)
[00:48:25] (130.237.232.141:80)

During that 3 to 4 minutes, how much of the 100 MB actually uploaded?

Please provide the same information from the log showing the successful upload of P2685 if, as Kasson has asked, it's on the same network connection.
stevew
Posts: 42
Joined: Mon Dec 03, 2007 11:53 pm
Hardware configuration: Mac Pro 8-core 2.26 GHz 2009, 12 GB.
iMac i7 3.4 GHz, 4 GB.
Location: Team Hack-A-Day

Re: 130.237.232.141 (P6900 unable to upload)

Post by stevew »

2 cents from another OS, OS X. From this vantage point it appears that the Stanford servers are just fine. I just looked back through FAHlog-Prev.txt and FAHlog.txt on a Mac Pro 8-core. 13 6900 WU since January 8, 2011 along with many 2600 series bigadv WUs. OS X has no problems returning WU to Stanford. My stats graphed look like a wicked saw blade, returning a bigadv WU every 49-53 hours: http://folding.extremeoverclocking.com/ ... =&u=204311
Activate: AMD
Posts: 2
Joined: Sat Feb 26, 2011 5:10 pm

130.237.232.141 Bad Packets?

Post by Activate: AMD »

Code: Select all

[17:10:46] + Attempting to get work packet
[17:10:46] Passkey found
[17:10:46] - Will indicate memory of 6142 MB
[17:10:46] - Connecting to assignment server
[17:10:46] Connecting to http://assign.stanford.edu:8080/
[17:10:47] Posted data.
[17:10:47] Initial: ED82; - Successful: assigned to (130.237.232.141).
[17:10:47] + News From Folding@Home: Welcome to Folding@Home
[17:10:47] Loaded queue successfully.
[17:10:47] Sent data
[17:10:47] Connecting to http://130.237.232.141:8080/
[17:10:48] Posted data.
[17:10:48] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[17:10:49] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
I've been getting this error for several hours now, but on the status page the server looks fine. Any idea whats going on?
slugbug
Posts: 27
Joined: Wed Apr 16, 2008 5:43 pm
Hardware configuration: Gigabyte P35-DS3L|Intel [email protected]|Galaxy 8800GT 512mb|2x1gb Buffalo Firestix DDR2 800
Location: Canada

Re: 130.237.232.141 (P6900 unable to upload)

Post by slugbug »

I have the same problem with a p6900 work unit waiting to upload to this server.
Image
aob
Posts: 4
Joined: Sun Apr 06, 2008 11:53 pm

Re: 130.237.232.141 (P6900 unable to upload)

Post by aob »

I am now having this problem as well, after completion it just says Connecting to http://130.237.232.141:8080/ then times out.
Post Reply