What old clunker do you use for dedicated folding.
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 10
- Joined: Tue Dec 07, 2010 3:13 am
What old clunker do you use for dedicated folding.
List your piece of junk machine that you leave under your desk and let it fold 24X7.
I am just curios how many other people run there old machine for this.
Don't include your personal machine, or that really cool one you built to gather up those points.
Just the old clunkers. Beats throwing it in the trash !
Mine is an old IBM Think Center, single core Pentium 4 @ 3.0 Gig Hz with 2 Gig Ram
Running Classic client.
I am just curios how many other people run there old machine for this.
Don't include your personal machine, or that really cool one you built to gather up those points.
Just the old clunkers. Beats throwing it in the trash !
Mine is an old IBM Think Center, single core Pentium 4 @ 3.0 Gig Hz with 2 Gig Ram
Running Classic client.
-
- Posts: 15
- Joined: Tue Dec 29, 2009 12:53 am
- Hardware configuration: CM341 Mini tower, Corsair 1000W PSU, Asus Rampage II Gene, 980X water cooled, 2xGTX460(768MB), 12GB 1600 DDR3, Patriot 256GB SSD
- Location: Seattle, WA
Re: What old clunker do you use for dedicated folding.
Some beat up Lian Li alu case, 650W PSU, EVGA 680i MB, Core 2 Quad QX6700&2.6GHz, Arctic freezer Pro7, PCI wireless card, 2Gig Corsair Dom PC8500DDR2, BFG GTX260@1404MHz, ASUS 8800GTX@1566MHz.
Win7 x64, SMP 4 and 2 GPU2 clients. Headless. Maintain with TeamViewer.
Occasionally Gentoo linux SMP with 2 Wine GPU2 clients. Less PPD since GPUs mess with SMP and no overclocking utility for the GPUs. Maintain with SSH.
15700 PPD Winter room heater.
Win7 x64, SMP 4 and 2 GPU2 clients. Headless. Maintain with TeamViewer.
Occasionally Gentoo linux SMP with 2 Wine GPU2 clients. Less PPD since GPUs mess with SMP and no overclocking utility for the GPUs. Maintain with SSH.
15700 PPD Winter room heater.
-
- Posts: 823
- Joined: Tue Mar 25, 2008 12:45 am
- Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU
4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit
Re: What old clunker do you use for dedicated folding.
An oldish cheap (even when it was new) Lenovo laptop. I run the classic client on a Yonah-based Celeron M @1.6 GHz. 512 MB of RAM.
I used to run the Classic and GPU clients on a pair of P4 Dell boxes that I had upgraded with beefier power supplies and AGP 3850's, but my parents got tired of paying the power bill on them, so the cards got sold off for a decent price and the processors no longer fold.
I don't know about others, but I wouldn't consider David's box a clunker. There's some decent parts in there.
I used to run the Classic and GPU clients on a pair of P4 Dell boxes that I had upgraded with beefier power supplies and AGP 3850's, but my parents got tired of paying the power bill on them, so the cards got sold off for a decent price and the processors no longer fold.
I don't know about others, but I wouldn't consider David's box a clunker. There's some decent parts in there.
-
- Posts: 24
- Joined: Fri Dec 10, 2010 12:08 am
- Hardware configuration: i7-860 2.8 GHz, 4 GB RAM, 1 TB HD, Win7 64-bit
Sapphire (ATI) 5670 825 MHz, 1 GB DDR5 RAM - Location: New Jersey
- Contact:
Re: What old clunker do you use for dedicated folding.
I'll say. 2.6 GHz is a clunker? Up until earlier this year, I was using a 450 MHz Pentium III. That's clunker territory.Zagen30 wrote:I don't know about others, but I wouldn't consider David's box a clunker. There's some decent parts in there.
-
- Posts: 348
- Joined: Thu Oct 23, 2008 2:42 am
- Hardware configuration: WooHoo= SR-2 -- L5639 @ ?? -- Evga 560ti FPB -- 12Gig Corsair XMS3 -- Corsair 1050hx -- Blackhawk Ultra
Foldie = @3.2Ghz -- Noctua NH-U12 -- BFG GTX 260-216 -- 6Gig OCZ Gold -- x58a-ud3r -- 6Gig OCZ Gold -- hx520
Re: What old clunker do you use for dedicated folding.
Next week i'll be "clunking" a q6600/8800gt combo, with a 520hx. But currenty its an e2180.
Box puts out about 8000ppd curently.
See, with Intels switch to new sockets, it made anyone who switch from a 775 to i7 rig, have a clunker that an be a real beast.
Just image nexdt year, when 2011 comes out!
Box puts out about 8000ppd curently.
See, with Intels switch to new sockets, it made anyone who switch from a 775 to i7 rig, have a clunker that an be a real beast.
Just image nexdt year, when 2011 comes out!
WooHoo = L5639 @ 3.3Ghz Evga SR-2 6x2gb Corsair XMS3 CM 212+ Corsair 1050hx Blackhawk Ultra EVGA 560ti
Foldie = i7 950@ 4.0Ghz x58a-ud3r 216-216 @ 850/2000 3x2gb OCZ Gold NH-u12 Heatsink Corsair hx520 Antec 900
Foldie = i7 950@ 4.0Ghz x58a-ud3r 216-216 @ 850/2000 3x2gb OCZ Gold NH-u12 Heatsink Corsair hx520 Antec 900
Re: What old clunker do you use for dedicated folding.
I have a HP business model bought "off-lease" for $129? at Tigerdirect. Think it's a P4? Dunno. Put a rebated GT430 in it ($59?) and it makes 5k PPD. Since it's a slimline case with a 150W powersupply, that was about the most I could do with it.
But it is still used for work. Runs WinXP Pro and MS Office to edit spreadsheets.
But it is still used for work. Runs WinXP Pro and MS Office to edit spreadsheets.
Quality Inspection - Corona, CA, USA
Dimensional Inspection Laboratory
Pat McSwain, President
Dimensional Inspection Laboratory
Pat McSwain, President
-
- Posts: 660
- Joined: Mon Oct 25, 2010 5:57 am
- Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 [email protected] GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers
b) 2004 HP a475c desktop, 1 core Pent 4 [email protected] GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only
c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß - Location: Saratoga, California USA
Re: What old clunker do you use for dedicated folding.
2 Clunkers - (Laptop & desktop are both underwhelming)
Both run Windows XP
a) Toshiba Satellite M45-S551 laptop with 2 GB mem, Single core Pentium M 740 CPU @ 1.73 GHz
Runs CPU Uniprocessor client - ~ 100 PPD 24/7.
b) HP Pavilion a475c desktop PC, one core Pent 4 Hyperthreading @ 3.2 GHz
Runs GPU 3 Systray client 24/7 (~1230 PPD with 511 point WUs, or ~ 1640 PPD with 384 point WUs when they were being served). Also run an additional CPU client - ~ 80 PPD. Coexists well with 511 point GPU WUs but not with 384 point GPU WUs
Aftermarket Power Supply: Cooler Master Elite RS-400-PSAR-J3: 400W
Mem 2GB (2 x 1 GB) PC3200 MB/sec
Hard drive 160 GB Ultra DMA 7200 rpm
Aftermarket Video graphics HIS H467QS1GHA Radeon HD 4670 IceQ Native HDMI 1 GB DDR3 AGP Graphics Card
Core clock Overclocked from 750 to 835 MHz, stock memory clock 800 MHz.
Separate PSU connection (because there were excess PSU connectors that could be adapted to the GPU)
GPU Runs ~57 deg C when folding – 96% GPU load
Monitor ASUS VW266 25.5” LCD (1920 x 1200, HDMI input)
HP desktop connected to APC Back-UPS ES 750 battery backup system. Laptop runs off of normal house current.
Both run Windows XP
a) Toshiba Satellite M45-S551 laptop with 2 GB mem, Single core Pentium M 740 CPU @ 1.73 GHz
Runs CPU Uniprocessor client - ~ 100 PPD 24/7.
b) HP Pavilion a475c desktop PC, one core Pent 4 Hyperthreading @ 3.2 GHz
Runs GPU 3 Systray client 24/7 (~1230 PPD with 511 point WUs, or ~ 1640 PPD with 384 point WUs when they were being served). Also run an additional CPU client - ~ 80 PPD. Coexists well with 511 point GPU WUs but not with 384 point GPU WUs
Aftermarket Power Supply: Cooler Master Elite RS-400-PSAR-J3: 400W
Mem 2GB (2 x 1 GB) PC3200 MB/sec
Hard drive 160 GB Ultra DMA 7200 rpm
Aftermarket Video graphics HIS H467QS1GHA Radeon HD 4670 IceQ Native HDMI 1 GB DDR3 AGP Graphics Card
Core clock Overclocked from 750 to 835 MHz, stock memory clock 800 MHz.
Separate PSU connection (because there were excess PSU connectors that could be adapted to the GPU)
GPU Runs ~57 deg C when folding – 96% GPU load
Monitor ASUS VW266 25.5” LCD (1920 x 1200, HDMI input)
HP desktop connected to APC Back-UPS ES 750 battery backup system. Laptop runs off of normal house current.
-
- Posts: 2
- Joined: Tue Jul 20, 2010 7:55 pm
- Location: Northern New Jersey, USA
- Contact:
Re: What old clunker do you use for dedicated folding.
I have a Dell Inspiron 8200 Laptop with a mobile intel pentium 4-m CPU running at 2.0 Ghz with 1 Gig of ram. It is getting about 40 PPD. I figure that ever little bit helps and a lap top isn't using all the much Elec. This machine is about 7 years old. It has gone through a couple of hard drives, but keeps chuggin' along.
Re: What old clunker do you use for dedicated folding.
clunker or clunker,comparered to other systems I guess it is.
asus P5N-D s775 with e5300 upgraded to Q8400 later,mostly for its two pci-e ports,the cpu is decent enough but not a big hitter.
actually getting a second one where the e5300 goes in,and two more gpu´s in production,that makes two "clunkers"
asus P5N-D s775 with e5300 upgraded to Q8400 later,mostly for its two pci-e ports,the cpu is decent enough but not a big hitter.
actually getting a second one where the e5300 goes in,and two more gpu´s in production,that makes two "clunkers"
Re: What old clunker do you use for dedicated folding.
HP nx9005 laptop XP2500m 448M XP-32
Gets about 45-65PPD, I keep it running because it has a proper serial port, which is important when connecting to some flavors of networking gear. Also, being a beta tester, I can catch oddities on old platforms when testing new cores.
Gets about 45-65PPD, I keep it running because it has a proper serial port, which is important when connecting to some flavors of networking gear. Also, being a beta tester, I can catch oddities on old platforms when testing new cores.
Folding since 1 WU=1 point
-
- Posts: 2948
- Joined: Sun Dec 02, 2007 4:36 am
- Hardware configuration: Machine #1:
Intel Q9450; 2x2GB=8GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460; Windows Server 2008 X64 (SP1).
Machine #2:
Intel Q6600; 2x2GB=4GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460 video card; Windows 7 X64.
Machine 3:
Dell Dimension 8400, 3.2GHz P4 4x512GB Ram, Video card GTX 460, Windows 7 X32
I am currently folding just on the 5x GTX 460's for aprox. 70K PPD - Location: Salem. OR USA
Re: What old clunker do you use for dedicated folding.
I just decided to make an HTPC for watching streaming TV (Hulu or Boxxe). It isn't used that much so it is basically just folding 24x7. I had an old Dell 8400 with a 3.2GHz P4 not being used. Since it is attached to a TV, I needed a modern video card with an HDMI output. The Dell had a PCI-e slot I got a GTX 460 to fold with. It is now getting 11,000 - 14,500 PPD. Not bad for a $129 investment.
-
- Posts: 460
- Joined: Sun Dec 02, 2007 10:15 pm
- Location: Michigan
Re: What old clunker do you use for dedicated folding.
If I plan to have it on all day for other purposes, I'll occasionaly run some classic WUs on a Compaq Presario R3000, Athlon XP-M 2800+.
My HTPC will be a Q6600 I'm retiring from the farm since getting a third i7 up and running. Of course, it's also going to be my gaming machine (2x GTS450) and do a little folding on the side.
My HTPC will be a Q6600 I'm retiring from the farm since getting a third i7 up and running. Of course, it's also going to be my gaming machine (2x GTS450) and do a little folding on the side.
Proud to crash my machines as a Beta Tester!
-
- Posts: 10
- Joined: Tue Dec 07, 2010 3:13 am
Re: What old clunker do you use for dedicated folding.
Very good info, It gives me some ideas, I had not considered using a laptop, also the used tiger direct PC for $100 is another idea. Also in my reading I heard someone mention using the folding machine to heat the house during the winter. That is really a cool idea. Pardon the pun. If I am going to use the electricity anyway why not burn those watts in a computer doing some good. 1 watt = 3 btu, now that is getting my creative little mind something else to do. OH NO more $$$$ gone.
Thanks everyone for the ideas and reading material.
Thanks everyone for the ideas and reading material.
Re: What old clunker do you use for dedicated folding.
I have one of those.uncle fuzzy wrote:...2800+
Old HP desktop running XP/Classic client. Running nonstop for @4 years now, although I might be upgrading soon.
-
- Posts: 1024
- Joined: Sun Dec 02, 2007 12:43 pm
Re: What old clunker do you use for dedicated folding.
At the risk of over-generalizing, laptops are designed to maximize battery life which is almost the opposite of what FAH needs. Be sure to disable the power-saving features of the CPU so FAH actually keeps folding 24x7 while you're connected to the mains. Both the CPU and the GPU (if you happen to have one that's supported) will not be high-performance hardware, but all processing is useful.[email protected] wrote:Very good info, It gives me some ideas, I had not considered using a laptop.
My laptop folds 24x7 when I'm not planning on a trip. Before any trip, I use the -oneunit flag to finish the current WUs cleanly.