I have a working system that had been running just fine since I turned it on for the winter a week ago when it got cooler. But a couple of hours ago, it gave me this:
[01:59:44] - Ask before connecting: No
[01:59:44] - User name: David_GX270 (Team 177289)
[01:59:44] - User ID: 3D5C07A935930E01
[01:59:44] - Machine ID: 2
[01:59:44]
[01:59:44] Loaded queue successfully.
[01:59:45] Initialization complete
[01:59:45] - Preparing to get new work unit...
[01:59:45] + Attempting to get work packet
[01:59:45] Project: 5734 (Run 4, Clone 592, Gen 26)
[01:59:45] + Attempting to send results [December 2 01:59:45 UTC]
[01:59:45] - Connecting to assignment server
[01:59:45] + No appropriate work server was available; will try again in a bit.
[01:59:45] + Couldn't get work instructions.
[01:59:45] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[01:59:46] - Couldn't send HTTP request to server
[01:59:46] + Could not connect to Work Server (results)
[01:59:46] (171.64.65.102:8080)
[01:59:46] + Retrying using alternative port
[01:59:47] - Couldn't send HTTP request to server
[01:59:47] + Could not connect to Work Server (results)
[01:59:47] (171.64.65.102:80)
[01:59:47] - Error: Could not transmit unit 08 (completed December 1) to work server.
[01:59:47] + Attempting to send results [December 2 01:59:47 UTC]
[01:59:47] - Couldn't send HTTP request to server
[01:59:47] (Got status 503)
[01:59:47] + Could not connect to Work Server (results)
[01:59:47] (171.67.108.17:8080)
[01:59:47] + Retrying using alternative port
[01:59:47] - Couldn't send HTTP request to server
[01:59:47] (Got status 503)
[01:59:47] + Could not connect to Work Server (results)
[01:59:47] (171.67.108.17:80)
[01:59:47] Could not transmit unit 08 to Collection server; keeping in queue.
Let me know when I should fire it back up.
Shutting down systems here to save electricity.
David
Attempting to send results, can't get work
Moderators: Site Moderators, FAHC Science Team
Re: Attempting to send results, can't get work
Server 171.64.65.102 is rejecting connections and the only other server with ATI WUs is 171.64.65.103 which is low on WUs right now. I've reported it to the server's owner.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 660
- Joined: Mon Oct 25, 2010 5:57 am
- Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 [email protected] GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers
b) 2004 HP a475c desktop, 1 core Pent 4 [email protected] GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only
c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß - Location: Saratoga, California USA
Re: Attempting to send results, can't get work
a) I've also been locked out of sending my last WU and retrieving my next. See latest snippet, and when I started to send the latest unit at 4:19.
b) What happened to the 384 point WUs that this server used to send out? Since 20 Nov, I've gotten nothing but an unbroken string of twenty six 511 point WUs for my ATI 4670.
Thanks.
Al
Code: Select all
[04:19:20] Folding@home Core Shutdown: FINISHED_UNIT
[04:19:23] CoreStatus = 64 (100)
[04:19:23] Unit 5 finished with 86 percent of time to deadline remaining.
[04:19:23] Updated performance fraction: 0.856706
[04:19:23] Sending work to server
[04:19:23] Project: 5732 (Run 4, Clone 620, Gen 30)
[04:19:23] - Read packet limit of 540015616... Set to 524286976.
[04:19:23] + Attempting to send results [December 2 04:19:23 UTC]
[04:19:23] - Reading file work/wuresults_05.dat from core
[04:19:23] (Read 263877 bytes from disk)
[04:19:23] Gpu type=1 species=3.
[04:19:23] Connecting to http://171.64.65.102:8080/
[04:19:24] - Couldn't send HTTP request to server
[04:19:24] + Could not connect to Work Server (results)
[04:19:24] (171.64.65.102:8080)
[04:19:24] + Retrying using alternative port
[04:19:24] Connecting to http://171.64.65.102:80/
[04:19:25] - Couldn't send HTTP request to server
[04:19:25] + Could not connect to Work Server (results)
[04:19:25] (171.64.65.102:80)
[04:19:25] - Error: Could not transmit unit 05 (completed December 2) to work server.
[04:19:25] - 1 failed uploads of this unit.
[04:19:25] Keeping unit 05 in queue.
.......
[05:25:45] + Attempting to send results [December 2 05:25:45 UTC]
[05:25:45] - Reading file work/wuresults_05.dat from core
[05:25:45] (Read 263877 bytes from disk)
[05:25:45] Gpu type=1 species=3.
[05:25:45] Connecting to http://171.67.108.17:8080/
[05:25:45] Posted data.
[05:25:45] Initial: 5448; + Could not connect to Work Server (results)
[05:25:45] (171.67.108.17:8080)
[05:25:45] + Retrying using alternative port
[05:25:45] Connecting to http://171.67.108.17:80/
[05:25:45] Posted data.
[05:25:45] Initial: 5448; + Could not connect to Work Server (results)
[05:25:45] (171.67.108.17:80)
[05:25:45] Could not transmit unit 05 to Collection server; keeping in queue.
[05:25:45] + Sent 0 of 1 completed units to the server
[05:25:45] - Autosend completed
[05:46:15] + Attempting to get work packet
[05:46:15] Passkey found
[05:46:15] - Will indicate memory of 2047 MB
[05:46:15] Gpu type=1 species=3.
[05:46:15] - Connecting to assignment server
[05:46:15] Connecting to http://assign-GPU.stanford.edu:8080/
[05:46:15] Posted data.
[05:46:15] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[05:46:15] + Couldn't get work instructions.
[05:46:15] - Attempt #11 to get work failed, and no other work to do.
Waiting before retry.
b) What happened to the 384 point WUs that this server used to send out? Since 20 Nov, I've gotten nothing but an unbroken string of twenty six 511 point WUs for my ATI 4670.
Thanks.
Al
Re: Attempting to send results, can't get work
There's no answer to a question like that. Projects come and go without notice.GreyWhiskers wrote:What happened to the 384 point WUs that this server used to send out? Since 20 Nov, I've gotten nothing but an unbroken string of twenty six 511 point WUs for my ATI 4670.
When a new project is added, it's because somebody on the science side put together a project to study a particular protein or a particular interaction. They don't pick projects with a particular number of points; the number of points depends on the complexity of the WU. When enough data has been collected on a particular project, new assignments are no longer issued and the results are analyzed off-line. That analysis may lead to a scientific paper or it may lead to some new questions being asked about areas that were not covered in the original analysis -- or if something totally unexpected is encountered, a whole new study may be launched.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: Attempting to send results, can't get work
This seems to have been fixed. Hopefully you'll be returning WUs and getting new assignments now.bruce wrote:Server 171.64.65.102 is rejecting connections and the only other server with ATI WUs is 171.64.65.103 which is low on WUs right now. I've reported it to the server's owner.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
Re: Attempting to send results, can't get work
That got it going again. TKS
David
David