171.64.65.56 not responding
Moderators: Site Moderators, FAHC Science Team
-
- Site Moderator
- Posts: 6359
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: 171.64.65.56 is in Reject status
It's currently up, but out of work
-
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: 171.64.65.56 is in Reject status
Nope.
It is thin in available WUs due to the fiasco with xx.108.24 however I have received at least three WUs from this server over the past couple of hours. Apparently, when it is not "503" or "AS blocked", a ton of Quads (not mine) are being assigned to it so there should be a huge supply of xx.56 WUs tomorrow.
Meanwhile, MOST of my damn Quads were assigned p5102's or equivalent and are less than 50% utilized. Argh!!!
This truly irks me given the presence of the "special bonus" for dual Quads that produces 50k plus/WU (effectively + or minus a 100% bonus).
The logic behind that program totally escapes me and I would love to see the private discussion related to implementing that "plan".
We fold on.......happily or unhappily........
It is thin in available WUs due to the fiasco with xx.108.24 however I have received at least three WUs from this server over the past couple of hours. Apparently, when it is not "503" or "AS blocked", a ton of Quads (not mine) are being assigned to it so there should be a huge supply of xx.56 WUs tomorrow.
Meanwhile, MOST of my damn Quads were assigned p5102's or equivalent and are less than 50% utilized. Argh!!!
This truly irks me given the presence of the "special bonus" for dual Quads that produces 50k plus/WU (effectively + or minus a 100% bonus).
The logic behind that program totally escapes me and I would love to see the private discussion related to implementing that "plan".
We fold on.......happily or unhappily........
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
-
- Site Moderator
- Posts: 6359
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: 171.64.65.56 is in Reject status
The server that serves BidAdv WUs is down too ... we're all in the same boat
-
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: 171.64.65.56 is in Reject status
Hey toTOW,
Do the math! You're a bright chap!
Given the timeframe that these servers were down, the net effect on a Quad that typically returns 3 WUs/day (and gets stuck with "a1s" as happened here) is SIGNIFICANTLY different than a dual Quad that takes 2 days plus to complete those "biggies".
This is accurate for those of us with SMP "farms" and also for the aggregate throughput of the Project.
Most of my 13 Quads are just spinning their wheels at this stage.
Several of my dualies are challenged to make preferred deadlines. <--sad not "mad"
Do the math! You're a bright chap!
Given the timeframe that these servers were down, the net effect on a Quad that typically returns 3 WUs/day (and gets stuck with "a1s" as happened here) is SIGNIFICANTLY different than a dual Quad that takes 2 days plus to complete those "biggies".
This is accurate for those of us with SMP "farms" and also for the aggregate throughput of the Project.
Most of my 13 Quads are just spinning their wheels at this stage.
Several of my dualies are challenged to make preferred deadlines. <--sad not "mad"
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
-
- Posts: 94
- Joined: Thu Nov 13, 2008 4:18 pm
- Hardware configuration: q6600 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon x2 6000+ @ 3.0Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
5600X2 @ 3.19Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
E5200 @ 3.7Ghz ubuntu 8.04 smp2 + asus 9600GT silent gpu2 in wine wrapper
E5200 @ 3.65Ghz ubuntu 8.04 smp2 + asus 9600GSO gpu2 in wine wrapper
E6550 vmware ubuntu 8.4.1
q8400 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon II 620 @ 2.6 Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2 - Location: Calgary, Canada
Re: 171.64.65.56 is in Reject status
[00:03:41] Folding@home Core Shutdown: FINISHED_UNIT
[00:06:55] CoreStatus = 64 (100)
[00:06:55] Unit 4 finished with 66 percent of time to deadline remaining.
[00:06:55] Updated performance fraction: 0.667433
[00:06:55] Sending work to server
[00:06:55] Project: 2677 (Run 32, Clone 38, Gen 29)
[00:06:55] + Attempting to send results [July 31 00:06:55 UTC]
[00:06:55] - Reading file work/wuresults_04.dat from core
[00:06:55] (Read 49146012 bytes from disk)
[00:06:55] Connecting to http://171.64.65.56:8080/
[00:06:55] - Couldn't send HTTP request to server
[00:06:55] + Could not connect to Work Server (results)
[00:06:55] (171.64.65.56:8080)
[00:06:55] + Retrying using alternative port
[00:06:55] Connecting to http://171.64.65.56:80/
[00:06:55] - Couldn't send HTTP request to server
[00:06:55] (Got status 503)
[00:06:55] + Could not connect to Work Server (results)
[00:06:55] (171.64.65.56:80)
[00:06:55] - Error: Could not transmit unit 04 (completed July 31) to work server.
[00:06:55] - 1 failed uploads of this unit.
[00:06:55] Keeping unit 04 in queue.
[00:06:55] Trying to send all finished work units
[00:06:55] Project: 2677 (Run 32, Clone 38, Gen 29)
[00:06:55] + Attempting to send results [July 31 00:06:55 UTC]
[00:06:55] - Reading file work/wuresults_04.dat from core
[00:06:55] (Read 49146012 bytes from disk)
[00:06:55] Connecting to http://171.64.65.56:8080/
[00:06:56] - Couldn't send HTTP request to server
[00:06:56] + Could not connect to Work Server (results)
[00:06:56] (171.64.65.56:8080)
[00:06:56] + Retrying using alternative port
[00:06:56] Connecting to http://171.64.65.56:80/
[00:06:56] - Couldn't send HTTP request to server
[00:06:56] + Could not connect to Work Server (results)
[00:06:56] (171.64.65.56:80)
[00:06:56] - Error: Could not transmit unit 04 (completed July 31) to work server.
[00:06:56] - 2 failed uploads of this unit.
[00:06:56] + Attempting to send results [July 31 00:06:56 UTC]
[00:06:56] - Reading file work/wuresults_04.dat from core
[00:06:56] (Read 49146012 bytes from disk)
[00:06:56] Connecting to http://171.67.108.25:8080/
[00:06:56] - Couldn't send HTTP request to server
[00:06:56] (Got status 503)
[00:06:56] + Could not connect to Work Server (results)
[00:06:56] (171.67.108.25:8080)
[00:06:56] + Retrying using alternative port
[00:06:56] Connecting to http://171.67.108.25:80/
[00:06:56] - Couldn't send HTTP request to server
[00:06:56] (Got status 503)
[00:06:56] + Could not connect to Work Server (results)
[00:06:56] (171.67.108.25:80)
[00:06:56] Could not transmit unit 04 to Collection server; keeping in queue.
[00:06:56] + Sent 0 of 1 completed units to the server
[00:06:56] - Preparing to get new work unit...
[00:06:56] + Attempting to get work packet
[00:06:56] - Will indicate memory of 1950 MB
[00:06:56] - Connecting to assignment server
[00:06:56] Connecting to http://assign.stanford.edu:8080/
[00:06:56] Posted data.
[00:06:56] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[00:06:56] + News From Folding@Home: Welcome to Folding@Home
[00:06:56] Loaded queue successfully.
[00:06:56] Connecting to http://171.64.65.56:8080/
[00:06:57] - Couldn't send HTTP request to server
[00:06:57] + Could not connect to Work Server
[00:06:57] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
-
- Posts: 94
- Joined: Thu Nov 13, 2008 4:18 pm
- Hardware configuration: q6600 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon x2 6000+ @ 3.0Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
5600X2 @ 3.19Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
E5200 @ 3.7Ghz ubuntu 8.04 smp2 + asus 9600GT silent gpu2 in wine wrapper
E5200 @ 3.65Ghz ubuntu 8.04 smp2 + asus 9600GSO gpu2 in wine wrapper
E6550 vmware ubuntu 8.4.1
q8400 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon II 620 @ 2.6 Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2 - Location: Calgary, Canada
Re: 171.64.65.56 is in Reject status
never mind
I was just inpatient, it happened on 2 server at the same time.
I was just inpatient, it happened on 2 server at the same time.
-
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: 171.64.65.56 is in Reject status
This server is behaving fine at present (as you noted) - just cleared two "autosend" WUs through it and another amazingly sent to the infamous xx.25 CS after a 503 from xx.56.
HOWEVER: DL=0 on xx.56 so be prepared for the worst over the next few hours if our friend Dr. Kasson is not available (or other events occur).
If the latter IS an issue, is there any way this can be resolved prior to ~7:45 PDT when my C2D's start completing?
HOWEVER: DL=0 on xx.56 so be prepared for the worst over the next few hours if our friend Dr. Kasson is not available (or other events occur).
If the latter IS an issue, is there any way this can be resolved prior to ~7:45 PDT when my C2D's start completing?
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
Re: 171.64.65.56 is in Reject status
We should be good for a bit--about 400G of space cleared on the server.
-
- Posts: 52
- Joined: Fri Dec 07, 2007 3:21 am
- Location: U.S. (TechReport.com's Team 2630)
Re: 171.64.65.56 is in Reject status
I've got one C2D machine which has been waiting since 18:16:14 UTC for a new WU. Status 503, over and over.
-
- Posts: 133
- Joined: Tue Dec 25, 2007 1:29 pm
- Hardware configuration: Orion (SMP):
---------------
CPU: Intel Core i7-2600
Memory: 8192 MBytes PC12800 DDR3 SDRAM
Graphics: Sapphire RADEON HD 5850, 1024 MB GDDR5 SDRAM
OS: Microsoft Windows 7 Home Premium (x64) Build 7601
Deepcore_II (SMP):
----------------------
CPU: Intel Core 2 Quad Q9650
Memory: 4096 MBytes PC6400 DDR2-SDRAM
OS: Ubuntu Server 10.04
Nostromo (SMP+GPU):
--------------------------
CPU: Intel Core 2 Duo E8500
Memory: 4096 MBytes PC6400 DDR2-SDRAM
Graphics: EVGA e-GeForce 8800 GT, 512 MB GDDR3 SDRAM
OS: Microsoft Windows 7 Home Premium (x64) Build 7601 - Location: Flanders, Belgium
Re: 171.64.65.56 is in Reject status
Same here
Code: Select all
[19:36:44] + Attempting to get work packet
[19:36:44] - Will indicate memory of 3912 MB
[19:36:44] - Connecting to assignment server
[19:36:44] Connecting to http://assign.stanford.edu:8080/
[19:36:45] Posted data.
[19:36:45] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[19:36:45] + News From Folding@Home: Welcome to Folding@Home
[19:36:45] Loaded queue successfully.
[19:36:45] Connecting to http://171.64.65.56:8080/
[19:36:45] - Couldn't send HTTP request to server
[19:36:45] (Got status 503)
[19:36:45] + Could not connect to Work Server
[19:36:45] - Attempt #11 to get work failed, and no other work to do.
Waiting before retry.
-
- Posts: 126
- Joined: Sat Aug 02, 2008 3:08 am
Re: 171.64.65.56 is in Reject status
I have 6 (most likely more @ work) systems in the same boat. Can we kick this server a bit and get it to play nicely again?
Thanks,
BW
Thanks,
BW
-
- Posts: 52
- Joined: Fri Dec 07, 2007 3:21 am
- Location: U.S. (TechReport.com's Team 2630)
Re: 171.64.65.56 is in Reject status
Mine finally got one ~19:40.
-
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: 171.64.65.56 is in Reject status
The netload on this server has looked a bit fishy most of the day.
It does appear to be accepting at least some completed WUs but not assigning.
Most of my C2D's complete between 430PM PDT and 1150PM PDT and I am not looking forward to another "challenging" weekend.
@ BW: You've been putting up too many WUs recently so I personally disabled your clients.
(Keep up the GREAT WORK)
It does appear to be accepting at least some completed WUs but not assigning.
Most of my C2D's complete between 430PM PDT and 1150PM PDT and I am not looking forward to another "challenging" weekend.
@ BW: You've been putting up too many WUs recently so I personally disabled your clients.
(Keep up the GREAT WORK)
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
Re: 171.64.65.56 is in Reject status
Just restarted the binary; hopefully that will help.
-
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: 171.64.65.56 is in Reject status
Thanks, as always
Looks good from here. The first of several C2D WUs was sent and acknowledged at 449PM (your time), and a new one was issued with no time lag.
Xfer rate on both send and receive were actually a bit faster than ususal.
Netload appears MUCH more reasonable.
My fingers are now crossed for the weekend.
I suspect that yours are too.
Looks good from here. The first of several C2D WUs was sent and acknowledged at 449PM (your time), and a new one was issued with no time lag.
Xfer rate on both send and receive were actually a bit faster than ususal.
Netload appears MUCH more reasonable.
My fingers are now crossed for the weekend.
I suspect that yours are too.
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!