Folding Forum

I am inclined to believe that the 4070 Super gives the best PPD/$ based on GPU cost only. When you amortize the complete system cost, that probably favor the 4080 Super, depending. I am intending to mix the 4060 TI and 4070 Super as some systems only have 500-600 PS, and also on hot summer days, I w...

on this one system, which has the MSI Ventus RTX 4060 Ti, goes into lower folding regardless of whether the screen saver activates or the monitor is turned off (will check later if display power save was disabled). Win 11, 24H2. Other systems are : Asus Dual RTX 4070 Super, Asus Tuf Gaming RTX 4060 ...

it now setting nVidia Control Panel, Power Management setting: Prefer Maximum Performance does not work?
any additional ideas are welcome

I will give the nVidia Control Panel, Power Management setting: Prefer Maximum Performance a try
however, other computers are in normal
and when display shuts off with no effect.
only this one system, not sure if I changed something

My AD104 RTX 4060 Ti is now working with the new GPUs.txt file. however, just in the last couple of days, whenever the system (windows) display turns off, the GPU is now going into low power mode? normally, PPD is around 6M, if the display shutoff and I touch a key, it shows 1.5M PPD or something. T...

it would be appear that a 4060 Ti can be either built from the size appropriate AD-106 chip or the larger AD104 chip that can accommodate either 4070, 4070 Super, or 4070 Ti, though not the 4070 Ti Super
so it is really a matter of noting which product can be built from each of the chips

According to GPU-Z
10DE 2788 - 1462 5121

the entry in GPU.txt seems to be
0x10de:0x2788:2:9:AD104 [GeForce RTX 4060 Ti]

So I gave up on this. But just yesterday I felt heat coming from the formerly largely inactive GPU. FaH now shows , starting Log Started 2024-08-20T03:58:07Z 03:58:07: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:9 AD104 [GeForce RTX 4060 Ti] before was: 21:36:23: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:1 GPUs.txt f...

I removed the 4060 Ti from the first machine, put it in the different machine. Still same.
FAH Control System Info says GPU 0 Bus:1 Slot:0 NVIDIA
status says: Disabled description gpu:1:0
on the first machine, I put in an old AMD R7, also disabled, but status does say R7 ...

I did notice there is a gpu.tct file that does have the 4060 Ti.
in retrospect, I have seen this problem before, and it eventually cleared itself
what you say would make sense.
I will just reboot daily until it clears

on a working system, there is 13:36:03: GPUs: 1 13:36:03: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:8 GA106 [GeForce RTX 3060 Lite Hash 13:36:03: Rate] 13:36:03: CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:8.6 Driver:12.5 13:36:03:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:3.0 Dri...

22:05:41:WARNING:FS01:Disabling beta GPU slot 01: gpu:1:0. Beta GPUs can be tested for no points by setting ``gpu-beta=true`` in the configuration.

I had a RTX 3080 Ti fail after about 3 years. The display went dark (motherboard did not connect iGPU), the system was still running - network accessible. A remote system FAHControl showed the system in question as up, but gpu disabled. I was only folding on the GPU, I had deleted the cpu slot Shutd...

I would check the WU's. My understanding of the FahCore_22 process (for nVidia GPUs) is that it is polling. Hence, a single core is pegged, bouncing between cores. If you reduce the CPU power/frequency, it doesn't really affect the PPD.

off topic, but I am pretty pissed at MS on Win 11, and will probably back step most of my systems to Win 10. I have C# app that prints one form in landscape, It worked correctly in XP, Win 7 and 10, but Win 11 does not respect the landscape setting. But I also not really happy with Win 10 as well. S...